Monster Strip®
Monster Strip®
Productspecificaties | |
| Merk | Rogue Fitness |
| Kleur | Zwart |
| Gemaakt in de VS | Ja |
| Gewicht | 13 LB (standaard) / 6,75 LB (half) |
| Lengte | 36" (standaard) / 16" (half) |
| Breedte | 3" |
| Staalgegevens | 3 "x 3" 11-gauge Stalen buis |
| Andere kenmerken | Materiaal voor montage aan houten staanders inbegrepen |
Productbeschrijving
The Monster Strip® is a unique, wall-mounted storage accessory designed—in this 3x3” version—for securely holding a wide range of Rogue Monster Series attachments. (See Also: the 2x3 Strip 2.0 for Infinity Series products and 3x3 ML Strip 2.0 for Monster Lite products)
Meer lezen
Monster Strip®
The Monster Strip® is a unique, wall-mounted storage accessory designed—in this 3x3” version—for securely holding a wide range of Rogue Monster Series attachments. (See Also: the 2x3 Strip 2.0 for Infinity Series products and 3x3 ML Strip 2.0 for Monster Lite products)
Available in both a standard 36” length and 16” Half-Strip format, the Monster Strip channel is made from the same 3x3” 11-gauge steel tubing as our Monster rack uprights, with an MG Black powdercoat finish, 1” detent pin, and oversized mounting holes. The Monster Strip is compatible with any of the following Monster accessories:
Gym owners can position The Monster Strip horizontally or vertically depending on the function required, and multiple Strips can also be installed in a series so the user can create his or her ideal custom storage set-up. For a simpler set-up, like hanging up a single Monster Matador, the space-efficient / cost-efficient Half-Strip may be the best option.
Accessories not included.
Productspecificaties
Specificaties
- Amerikaans kwaliteitsproduct
- Wall-Mount Storage Tube - 3x3” 11-gauge steel construction
- Per stuk verkrijgbaar
- For use ONLY with Monster Series compatible accessories
- Length: 36”
- Finish: MG Black Powdercoat
- Laser-Cut Rogue branding
- For use on wood studs and concrete walls (May require the use of a stringer or additional support)
Bekijk ook:
Verzenden
Rogue Snelle Verzending
Via het Rogue-verzendsysteem kun je je bestelling volgen vanaf het moment dat je de bestelling plaatst tot aan het moment dat deze wordt bezorgd. Bestel nu en volg je bestelling direct.
The 36” Monster Strip includes:
- (1) 1" x 4-1/2" detent pin
- (4) 3/8" x 2-1/2" Lag Screws for mounting to a stud*
- (4) Oversized Holes on front to allow for easy tightening of the lags
- Wallmount Hole Spacing: 8” on-center (top and bottom), 16” on-center (middle holes)
- Hole Spacing along sides: 2” on-center
- Finish: MG Black Powdercoat
- Laser-Cut Rogue branding
The 16” Monster Half Strip includes:
- (1) 1" x 4-1/2" detent pin
- (2) 3/8" x 2-1/2" Lag Screws for mounting to a stud
- (2) Oversized Holes on front to allow for easy tightening of the lags
- Wallmount Hole spacing: 12” on-center
- Hole Spacing along sides: 2” on-center
- Finish: MG Black Powdercoat
- Laser-Cut Rogue branding
*Important: If attempting to secure the Strip to a wall construction other than wood stud, the buyer is responsible for using the correct hardware. The Strip is NOT recommended for mounting to drywall or metal studs.