Rogue RM-3 Monster Rack 2.0

★★★★★
★★★★★
4.9
78 reviews
Gemaakt in de VS.
Product Image

Rogue RM-3 Monster Rack 2.0

★★★★★
★★★★★
4.9
78 reviews
Gemaakt in de VS.
€ 1.605,00
Excl. btw
€ 1.326,45
Wordt verzonden vanuit de VS
Verzending binnen 4-6 weken

Kleur (10)*Satin Black

Hoogte*

Productspecificaties

MerkRogue Fitness
Gemaakt in de VSJa
Lengte36"
Breedte49"
Hoogte90.375", 100.375", or 108.375"
Vloerafmetingen40" x 53"
Staalgegevens3x3" 11 gauge staal
Productbeschrijving

Rogue designed the fully customizable power racks of the Monster Series to meet the high demands of the top professional, collegiate, and high school athletic facilities in the world. We used bigger, 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. With Version 2.0, we’ve also rolled out a number of new features, including a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.

Meer lezen

Rogue RM-3 Monster Rack 2.0

Rogue designed the fully customizable power racks of the Monster Series to meet the high demands of the top professional, collegiate, and high school athletic facilities in the world. We used bigger, 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. With Version 2.0, we’ve also rolled out a number of new features, including a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.

The 30" depth RM-3 Monster Rack is available in three height options (90”, 100”, 108”); comes with all required 1" hardware and 4 band pegs; and ships standard with (2) Rogue Monster 1.5" Wrenches. Any other attachments and accessories pictured are NOT included. You can explore many of our compatible Monster Rack attachments on this page and add selections to your order (at a listed additional cost) via the convenient dropdown menu.

Updates on Color Options: The new Monster Rack 2.0 units include a dozen different custom color coating options, most of them in a medium gloss powder coat (the Satin Clear finish is a transparent finish, meaning any blemishes or marks from the manufacturing process will still be visible in the steel).

Check out ALL of the custom options available on the 30" depth RM-3 Monster Rack below.

Important: This rack must be bolted to the floor before use.

Explore the Monster Rack Attachments.

Verzenden

Rogue Snelle Verzending

Via het Rogue-verzendsysteem kun je je bestelling volgen vanaf het moment dat je de bestelling plaatst tot aan het moment dat deze wordt bezorgd. Bestel nu en volg je bestelling direct.

Monster Series vs. Infinity Series

UPRIGHT HEIGHT

All Monster uprights are made from 3x3" 11 Gauge Steel and include 1" holes spaced 2" on center.

90"
Allows a 43" Single Pull-Up Bar to be mounted at a max height of 84" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Available at a slightly reduced price from standard 100" unit.

100" (Standard)
The Monster's default height selection. Allows a 43" Single Pull-Up Bar to be mounted at a max height of 94" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack.

108"
Allows a 43" Single Pull-Up Bar to be mounted at a max height of 102" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Priced slightly higher than standard 100" unit.

Kleuren

Loading

AVAILABLE IN 9 CUSTOM COLORS:

Bright Blue, Bright Green, Burnt Orange, Dark Blue, Gun Metal, Light Gray, Rogue Red, White, Satin Clear, Satin Black (Standard)

All color options come in a durable, medium gloss powder coat.

Hardware

2 HARDWARE FINISHES

Choose between Proprietary Matte Black or Bright Zinc.

Crossmembers

XM-431 Monster 43” Single Pull-Up Bar

Our standard, default selection for the front of the rack, this single 1.25" diameter pull-up bar includes 9" endplates and  , along with a textured black powder coat finish.

XM-43N Monster 43” Crossmember w/ Nameplate

Features a Satin Black base crossmember with laser cut "ROGUE" panels on each side. Red is the default panel color, but if a customer selects a custom color, the panel will change to match it.

XM-433 Monster Fat/Skinny Pull-Up Bar

Includes (1) 1.25" pull-up bar and (1) 2" fat grip pull-up bar built in to the same crossmember, spaced 9.5" on center. The large endplate is 17" overall, and mounting holes are 14" on center. Finish is our standard textured black powder coat.

XM-432 Monster 43” Single Fat Bar

A wider, 2" diameter version of the standard Single Pull-Up Bar, this option also includes 9" end plates with   and our textured black powder coat finish.

XM-43P Monster 43” Beam w/ Gusset

A new Monster crossmember designed with 2 gussets for added strength and a flush mount with the top of the uprights. Includes laser-cut "R" logos on each gusset and a Satin Black powder coat finish across the beam. Does NOT function as a pull-up bar.

43" Monster Socket Pull-Up Bars

Single bar available in a wide range of custom Cerakote color finishes with optional barbell-style knurling. Ships standard with (2) MG Black mounting sockets and (4) Bright Zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. The bar itself is 1.125" in diameter, and all Cerakote-coated versions include the Rogue logo in the center.

43" Monster Socket Pull-Up Curl Bar

Made from 28.5MM cambered steel with extended knurling and Black E-Coat finish. Ships standard with (2) MG Black mounting sockets and (4) bright zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. Design enables close-grip and wide-grip pull-ups.

J-Cups

Monster Standard J-Cup Pair

Monster Standard J-Cup Pair

Our default J-Cup selection. Features UHMW plastic within the cup itself to protect the bar's knurling, as well on the backside and the clasp to protect uprights from scratching/chipping. 1000LB rating. 

Rackable Depth: 2.75"

Monster 1" Sandwich J-Cup Pair

Monster 1" Sandwich J-Cup Pair

The Monster Sandwich J-cup has a UHMW plastic core which offers full protection against your barbell knurling. It also has UHMW plastic on the backside to protect the rack from chipping. 1000LB rating. 

Rackable Depth: 2.5"

Monster 2" Sandwich J-Cup Pair

Monster 2" Sandwich J-Cup Pair

The side plates fit into a recessed, machined plastic core (2" wide) to prevent metal-to-metal contact. The hardware (that connects the plastic to the side plates) is also recessed, preventing the bar or a user’s hand from scraping against them. Welds are inside the side plates for a clean edge, and UHMW plastic is featured on the clasp and back plate to prevent damage to the uprights. A thin piece of rubber on the side of the clasp also softens contact between the clasp and upright when the J-Cup is swung into place. 1000LB rating. 

Rackable Depth: 2.5"

Ghost Roller J-Cup 2.0

Ghost Roller J-Cup 2.0

The Ghost Return Roller J-Cup 2.0 can comfortably accommodate barbell shafts ranging from 1” (25 MM) to 2” (50 MM) in diameter. The compact design makes it less likely that an athlete will make accidental contact with the J-cups when benching or squatting, and the roller feature enables much safer and easier centering of the barbell prior to lift off.

Rackable Depth: 2.875"

Beveiliging

Monster Pin & Pipe Safety Set

Our default safety selection. Standard pair. Pin: 1" diameter, zinc coating.Pipe: 1.5" diameter, schedule 80 pipe, black powder coat. Depths are 24", 30" and 43".

Monster Strap Safety System 2.0

3" wide reinforced nylon straps designed to prevent damage to barbell knurling on any missed lift, or to roll the bar safely away from the user on a drop. Rated for 10,000LB. Notched pin design securely locks the system into place and allows for easy, quick adjustments. Depths are 24", 30" and 43".

Monster 43” Flip Down Safety

Compatible ONLY with the 43" depth RM-4 and RM-6 racks. Features UHMW plastic to proctect both the knurl of the barbell and the uprights of the rack. Finish is medium gloss black powder coat. Made from 3x3" 11 Gauge Steel.

Aanbevolen producten

reviews

1 - 8 van 78 reviews
Joelle
★★★★★
★★★★★
4 weeks ago
Quality and service second to None!!
Extremely happy with the rig. Built like a tank. Easy to assemble everything fits perfectly, finish is outstanding. Customer service is outstanding. So so happy I went with American built and company. Very proud. It’s completely kitted out and I made some Loss of My own Using rogue parts and it’s fenomenal.
Oorspronkelijk gepost op roguefitness.com
Adam from Florida
Florida
★★★★★
★★★★★
Jul 2024
By-once-cry-once
Wanted to start a home gym. Did a month worth of research on brands, rack sizes, etc. and decided to invest in an RM-3 since the rack is the most important piece for me to get right while I build the rest of the gym around it. This thing is sturdy. I felt safe enough lifting by myself during my first workout that I was confident enough to push myself for a flat barbell bench PR (photo not included). The rack is sturdy enough to perform pullups on without it being bolted down, but I still opted to offset my weight with plates on the bottom/back and will be investing later on into some crossmember extensions that act similar to a flat foot. For reference, I'm 5'8" 190lbs, and the rack is the 90" height. I have to get on my tip-toes to grab on to the bar, but I can hang freely without my feet touching the floor. I was able to request the black-on-black nameplate via the special comments/requests section during my ordering process and it matches the black-on-black setup I'm going for. I like the fact that it has keyholes so I can jerry-rig 5/8" attachments (at my own risk of course). Thankfully most of the attachments I'm considering are offered by Rogue, and the Monster series is pretty much the flagship. I would've been fine with a 5/8" size pinhole like the Monster Lite, but I opted for the 1" for the aforementioned reason. Overall, I feel like this thing could outlive me. Definitely a buy-once-cry-once investment, and I'd recommend considering Rogue.
Feline approved.
Oorspronkelijk gepost op roguefitness.com
Coach Bek
San Bernardino, Ca
★★★★★
★★★★★
Jun 2024
Best Rack out there
Bought this and a bench in lime green. Besides the color being awesome this thing is beyond great. We can do everything we need with it.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
The Tony V
★★★★★
★★★★★
Jun 2024
Beautiful, Robust, Perfect
After using a squat stand as a do-it-all rack for the past year, I decided to go all in and invest in this and after just a few weeks of using it I have to say I LOVE IT and I regret the money spent on the squat stand. If you are thinking about saving your money - don't. It is 100% worth it to go all out!
Oorspronkelijk gepost op roguefitness.com
SHAWNYBOY1
Victorville California
★★★★★
★★★★★
May 2024
BEAST UNIT!!
This is a beast of a unit!! Amazing! Instructions lack slightly but, YouTube picks up the rest!
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
Koko2024
Las Vegas
★★★★★
★★★★★
Feb 2024
Big rack but still good for tight spaces
Very compact front to back but still lots of space to get all your work done.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
AllTypos
Bay Area, California
★★★★★
★★★★★
Jul 2023
Absolutely incredible
Pictures don’t accurately show how beautiful the satin clear finish is. I changed the name plate to the one used in the stainless steel RM6. If I were start my gym from scratch, I’d buy this again
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
El_guapo
Conroe,TX
★★★★★
★★★★★
Mar 2023
Made in America can’t get any better
I have been a garage gym fan for years, and my first gym was built using a competitor.. in the last year I realized how important is to have a company that understands your needs, delivers quality product made in America , and resolves any issues in a quick matter looking up for the customer. After opening my packages , I was able to immediately see and appreciate the standards Rogue put in its products in addition; their customer service was top notch answering my requests , answered every question I had , and make me feel like I wasn’t building this gym on my own . I am very grateful to have an American company that builds quality products that treats me as a team member not just a customer…
Monster mass storage (almost finished )
Oorspronkelijk gepost op roguefitness.com
#RYOUROGUETag je foto's op Instagram en Twitter met #RYOUROGUE... dan word jij misschien opgenomen in onze galerijBekijk volledige galerij