Daily Shipping Deals





Monster Lite Crossmembers

Monster Lite Crossmembers

XML-43 Monster Lite 3x3x43" Crossmember Pair
XML-24 Monster Lite 3x3x24" Crossmember Pair
X-43 Cross Member
X-431 Single 1.25" Pull-up Bar
Rogue X-43" Single Fat Bar

Availability: Ships in 14-30 Days

Rogue 43" Fat/Skinny Pullup Bar
XML-70B - Monster Lite 70" Beam
Rogue SPEAL Pull-up Bar 2.0
XML-70S Single Pull-up Bar 2.0
X-70 Long Cross Member
Monster Lite 3.0 43" Nameplate Crossmember

Rogue Monster Lite Crossmembers

Rogue manufactures a wide range of crossmembers and pull-up bars that are compatible with our Monster Lite Series and available here for individual or combination orders. This includes some of our standard Infinity Crossmembers, as well as a line of bars designed specifically for the 3x3” dimensions of the Monster Lite upright.

Monster Lite Crossmembers and Pull-Up Bars are manufactured in America with US steel and represent an affordable way to add new work stations to a rig while improving the overall stability of the unit. With your choice of single vs double bar, fat vs skinny bar, and length options of 24”, 43”, and 70”, there is sure to be a crossmember add-on that matches your gym’s needs.

Monster Lite Crossmember Options:

  • XML-24 Monster Lite 3x3x24” Crossmember Pair
  • XML-43 Monster Lite 3x3x43” Crossmember Pair
  • X-43 Crossmember
  • X-431 Single 1.25” Pull-Up Bar
  • X-432 Single Fat 2.0” Pull-Up Bar
  • X-433 Fat/Skinny Bar (2” OD bar + 1.25” OD bar)
  • XML-70B – Monster Lite 70” Beam*
  • SPEAL Pull-Up Bar 2.0
  • Rogue 70” Single Pull-Up Bar
  • X-70 Long Crossmember
  • Monster Lite 3.0 43" Nameplate Crossmember

*70” Beams can be used to daisy chain two Monster Lite Racks together.

Hardware Not Included with any of the products above.

Please Note: These crossmembers are intended for use with the 3x3” Monster Lite Series. For more options, see below:
Infinity Crossmembers
Echo Crossmembers

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Monster Lite Compatible Yes
Monster Lite Crossmembers is rated 4.9 out of 5 by 20.
Rated 5 out of 5 by from Highly quality, but...hardware included Quality is excellent, however, the hardware (nuts, washers, bolts) is not included.
Date published: 2021-05-27
Rated 5 out of 5 by from Great Stabilizer Added one of these between the rear posts on the HR-2 conversion rack; the added rigidity is quite noticeable. Sold, well made, heavy, perfect.
Date published: 2021-01-08
Rated 5 out of 5 by from Great! Bought this cross bar to turn my SML-1 into a mini SML-2. Attached picture speaks for itself. Couldn’t be happier. Adds a lot of stability and functionality.
Date published: 2020-12-25
Rated 5 out of 5 by from XML-43 Monster Lite Crossmember Pair I'm renovating my garage and it is going to be some time to set up my wall mount rack. I bought the cross members to use on a temporary basis - a coupl of months. They work great - very solid. If you want extra support for your Rogue 30" four upright rack, these work great.
Date published: 2020-12-20
Rated 5 out of 5 by from X-431 Bar - Just what I expected! Finally got one a while back and works like a charm. I have an SML-1 rack so as many of you would assume, you'd have to lift your feet up to do pull-ups. I'm 5'8 as reference. I don't really care for all the CF movements, so I just wanted a bar for basic pull ups. FYI - when you get the bar and just stick it in between the posts, you might realize there's a slight gap and it doesn't fit perfectly in between. This happened to me not because the bar wasn't the right size, but rather, the posts were slightly forked out at the top due to the bottom frame of the squat rack bolting down the posts. I checked by measuring the bottom of my rack and measured out at 46", which is the correct number while the top measured at 46.5". I inserted the screws and slowly tightened all of them and the bar fit perfectly in the end.... just warning some folks in case you freak out thinking the bar seems short!
Date published: 2020-12-06
Rated 5 out of 5 by from Great Bar I bought an extra pull up bar to be able to have different bars at different heights. Works perfect, just like everything I have from Rogue.
Date published: 2020-11-20
Rated 5 out of 5 by from Functional and a classic in design I added the monster lite nameplate crossmember to my RML 390C for added stability, and was super pleased with not only its ability to make the rack more stable, but it also adds character to the overall appearance of the rack and makes it a signature piece. It's very heavy and solid. Not having this on my rack is akin to having a Mercedes without the signature emblem......so understated without it.
Date published: 2020-11-10
Rated 5 out of 5 by from Pristine! Brings a lot of character to complete my rack! Wish you could purchase in different colors. Maybe one day.
Date published: 2020-10-21
  • y_2021, m_6, d_12, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_XX8101, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue