Rogue 6-Shooter Urethane Olympic Grip Plates

★★★★★
★★★★★
4.6
32 Reviews

Rogue 6-Shooter Urethane Olympic Grip Plates

★★★★★
★★★★★
4.6
32 Reviews
245LB Urethane 6-Shooter Grip Plate Set
$1,045.00
*Includes a pair of each size plate
2.5LB Urethane Olympic Grip Plate - Pair
$31.00
5LB Urethane Olympic Grip Plate - Pair
$52.00
10LB Urethane Olympic Grip Plate - Pair
$91.00
25LB Urethane 6-Shooter Grip Plate - Pair
$223.00
35LB Urethane 6-Shooter Grip Plate - Pair
$292.00
45LB Urethane 6-Shooter Grip Plate - Pair
$345.00
Product Description

Rogue 6-Shooters are encased in a thick polyurethane coating, with six symmetrical grip holes spaced out around the circumference of each 25LB, 35LB, and 45LB plate. These holes—precision-cut and in close proximity to the raised lip at the edge of the plate—offer athletes a comfortable grip and an easier way to lift, carry, or load a plate from any angle.

Read More

Rogue 6-Shooter Urethane Olympic Grip Plates

Rogue 6-Shooters are encased in a thick polyurethane coating, with six symmetrical grip holes spaced out around the circumference of each 25LB, 35LB, and 45LB plate. These holes—precision-cut and in close proximity to the raised lip at the edge of the plate—offer athletes a comfortable grip and an easier way to lift, carry, or load a plate from any angle.

Each 6-Shooter Olympic Grip Plate includes LB markings, exclusive Rogue branding, and a 2” diameter collar opening for compatibility on any standard Oly barbell. The smaller 6-Shooter change plates (2.5LB, 5LB, and 10LB) include a center hole only, without the additional six-hole pattern.

The 25LB, 25LB and 45LB 6-Shooters all feature a 5MM thick PU coating and are built for everyday, high-traffic use. Please note, however, that these are NOT bumper plates and should not be dropped on the floor like a bumper.

Using the form on this page, you can order a complete 6-Shooter Grip Plate set, a single pair, or a custom combo.

Warranty: 5-Year commercial warranty against breakage. Warranty is void if there is evidence of abuse or excessive dropping.

See More: Weightlifting Plates Available from Rogue

Gear Specs

Specifications:

  • Olympic Grip Plates
  • 5MM thick Urethane coating
  • Six grip holes for easier carrying, loading from any angle (only on 25LB, 35LB and 45LB plates)
  • 50.60MM collar opening
  • LB markings and Rogue branding
  • Color: Black
  • Weight Tolerance: +/- 1% (25-45LB plates), +/- 3% (2.5-10LB plates)


Plate Sizes:

  • 45LB: 448MM total diameter / 1.5" thickness / 80MM diameter grip holes
  • 35LB: 376MM / 1.7" / 70MM
  • 25LB: 308MM / 1.9" / 60MM
  • 10LB: 228MM / 1.2" / none
  • 5LB: 195MM / 0.75" / none
  • 2.5LB: 162MM / 0.65" / none
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Loading

Gear Specs

BrandRogue Fitness
Made In USANo
10LB Plate Width1.2"
25LB Plate Width1.9"
35LB Plate Width1.7"
45LB Plate Width1.5"
DiameterVaries
Collar Opening50.60MM
Plate TypeMultipurpose

Recommended Products

Reviews

1 - 8 of 32 Reviews
JohnathanS54
Summerville, SC
★★★★★
★★★★★
3 weeks ago
Accurate to specs, Terrible Finish
Pros: The plates are all within the specified weight and fit tightly on the bar. Cons: The finish is not at all what I expected. For 50% more than the non-urethane coated six shooter plates I expected a smooth finish. However, is not the case. I ordered 30 plates (16 45s, 2 35s, 2 25s, 4 10s, 4 5s, and 2 2.5s). The finish on all but two plates (a 10 and a 2.5) are messed up. Examples of flaws in the finish include swirls, scuffs, chips, bubbling, fading (while having never been exposed to the sun two plates are severely faded), peeling, jagged lettering, and letters falling out of their intended impression. 16 letters have fallen out from routine use. The plates have only been used for squats and bench and have been well taken care of. I regularly clean the plates with just a damp rag. This is necessary since the black urethane shows chalk and sweat badly. I will include as many examples as I can in the pictures below, but I am limited to only six photos. I reached out to Rogue after six months of owning the plates (they have only been used for about 3 months as I was deployed when they were delivered) and they were initially very responsive, however, I haven’t heard back in over three weeks. Bottom Line: The plates have great accuracy, fit on the bar, and do their job but I would highly recommend saving yourself 33% (over $1100 in my case) and buying the non coated version.
Helpful?
Yes · 0
No · 0

Response from Rogue Fitness:

3 weeks ago
This is not normal for these plates and we are getting them replaced for you. We're very sorry for the issue and appreciate your patience!
Anthony_A
Monterey, CA
★★★★★
★★★★★
June 11
Poor Quality Finish
I wanted to add to my collection and ordered a pair of 25's and 45's. Compared to my original six shooters these have very noticeable finish issues. The 25's have swirly finish and the 45's looks like the clear coat fading on my 15 year old Toyota hood. These should have been sold in Boneyard section where they put all there quality seconds with fit and finish flaws.
Helpful?
Yes · 2
No · 0

Response from Rogue Fitness:

June 13
We're very sorry to see how these plates arrived to you! Our team has looked into this and have issued a credit.
Going rogue
Wyoming
★★★★★
★★★★★
Jul 2021
6-shooter Urethane Olympic Grip Plate/5 pound
I bought the 5 pound plate looking for some change plates. They work like they are supposed to. So, just so you know if you buy them they are only labeled on the front side and the metal center hole does not overlap onto the plate like the standard bumper plates do. Something to also note is that they do have a 5 year warranty against breakage which is more than some other plates offer.
Yes, I recommend this product
Helpful?
Yes · 6
No · 1
GB III
Munroe Falls, OH
★★★★★
★★★★★
Jul 2021
Mostly good, but
This product is built well; however, It would be much smoother if the center chrome extended out further and the printing encompassed both sides as in the case of the 6 sided urethane plates. These are much nicer features used on the 6 sided urethane plate.
Yes, I recommend this product
Helpful?
Yes · 6
No · 0
KSparr
MI
★★★★★
★★★★★
Jun 2021
Easy to grip and carry
Love the “handles” on the plates from rogue makes the heavier plates easier to carry, maneuver and load into equipment.
Yes, I recommend this product
Helpful?
Yes · 2
No · 1
Vetbassman
San Antonio, TX
★★★★★
★★★★★
Jun 2021
Rogue Weight plates
Great solid plates. They are evenly balanced and great for letting bounce off our matt.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
R A 160
New York
★★★★★
★★★★★
Jun 2021
Love the curl bars
Love rogue gear little by little will get everything I need
Yes, I recommend this product
Helpful?
Yes · 0
No · 1
Kalvin
★★★★★
★★★★★
Apr 2021
Got the 2.4lbs, awesome change plates
Bought 3 pairs of the 2.5lb plates as I could not find any 5lb available. Extremely happy with this decision, the ability to inclemently increase weight in small values really helps with my program. Have had them for about a few months now and have no issues, very sturdy and built well/packaged well.
Yes, I recommend this product
Originally posted on roguecanada.ca
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery