Rogue HD Bar Jack

★★★★★
★★★★★
4.3
4 Reviews
Made in U.S.A.

Rogue HD Bar Jack

★★★★★
★★★★★
4.3
4 Reviews
Made in U.S.A.
$310.00
Ships in 14-30 Days

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight61LB
Length42.25"
Width17" (depth)
Height32.75"
Steel Notes0.25" and 0.375" flat steel, 4" x 2" 11 Gauge Steel Tube
Other Product SpecsRubber Grip on Handle
Product Description
Gear Specs
Shipping
Product Description

The Rogue HD Bar Jack is a heavy-duty, uniquely portable adaptation of our standard Deadlift Bar Jack. This design not only enables powerlifters to load and unload the barbell from a stable, elevated position, but also includes a set of six embossed wheels for quickly rolling the bar from a loading area to a lifting area—no matter how much weight has been added. Each wheel measures 72MM in diameter and includes a bearing and two bushings, ensuring a smooth, consistent roll even when moving the unit around angles.

Read More

ROGUE HD BAR JACK

The Rogue HD Bar Jack is a heavy-duty, uniquely portable adaptation of our standard Deadlift Bar Jack. This design not only enables powerlifters to load and unload the barbell from a stable, elevated position, but also includes a set of six embossed wheels for quickly rolling the bar from a loading area to a lifting area—no matter how much weight has been added. Each wheel measures 72MM in diameter and includes a bearing and two bushings, ensuring a smooth, consistent roll even when moving the unit around angles.

The HD Bar Jack is manufactured in the USA, and is equipped with a 4"x2" 11-gauge steel crossmember, 0.375" thick laser-cut steel endplates, and a 36" long T-shaped handle with a rubberized grip. UHMW plastic is included to protect the bar's knurling and finish through repeated uses.

Gear Specs

Specifications

  • Made in the USA
  • Weight: 61LB
  • Dimensions: 42.25" x 17" (depth) x 32.75"
  • Steel Notes: 0.25" and 0.375" flat steel, 4" x 2" 11 Gauge Steel Tube
  • (6) Embossed Wheels - 72MM diameter
  • Protective UHMW Plastic Lining
  • T-Handle with rubberized grip
  • Laser-Cut Rogue branding in endplates
  • All Hardware Included
  • Set-Up Info: 0.5" hardware for bolting on the wheels and connecting the crossmember to the end plates. The handle is held in place using 0.375" hardware. The UHMW plastic sandwiches the end plates using 0.25" hardware.
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

1

Wheeled Barbell Jack

The HD Bar Jack is one of the few barbell jacks in the industry built with wheels for free-range maneuverability within a training space. The advantage of this design is clear, as a powerlifter can fully load a bar to the desired weight direct from a plate rack, then move the loaded bar into a separate area for the lift. This requires a strong set of wheels, so we placed three on each side, measuring 72MM in diameter and equipped with a bearing and two bushings each. The 3-wheel stack-up allows the HD Bar Jack to roll smoothly in both the loaded position (using the two front wheels) or the unloaded position (using the back wheels).

2

Easier, Safer Way to Load a Bar

The central purpose of a bar jack, of course, is take the pain out of loading and unloading the barbell for deads and other lifts that start from the ground. Just prop the jack under the bar, pull the handle back to elevate, and slide on more weight just like you would if the bar was racked.

3

Heavy-Duty Rogue Construction

The HD Bar Jack is manufactured in Columbus, Ohio, using materials up to the task of heavy-weight, competition-level powerlifting. The unit’s crossmember is made from 4"x2" 11-gauge steel tubing, and connects to a pair of 0.375" thick laser-cut steel endplates. The vertical portion of the 36” long T-shaped handle goes directly through the crossmember for maximum stability, and is made from schedule 40 pipe. The 14" horizontal top portion of the handle is constructed from 1" solid round steel, and includes a rubberized grip.

4

Pairs with Other Rogue Powerlifting Products

A quality, American-made Bar Jack deserves a quality, American-made barbell. If you’re looking to upgrade your full arsenal, Rogue’s Ohio Deadlift Bar or Ohio Power Bar will not disappoint. Our high-precision Calibrated Steel Plates have also have earned their keep with competitive powerlifters.

5

UHMW Protective Plastic

Another key feature of the HD Bar Jack is the use of a 0.5" thick UHMW plastic lining within the cups where the barbell rests. This plastic ensures that the bar shaft will never come into metal-to-metal contact that could potentially damage the knurl—an important layer of protection, especially with the heavier weights this jack will be picking up.

6

Fast Rogue Shipping

The HD Bar Jack ships disassembled in 3 boxes. All required hardware is included with the unit. Orders placed by 3PM ship the same day. The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Recommended Products

Reviews

1 - 4 of 4 Reviews
Brady1313
Aurora, CO
★★★★★
★★★★★
4 months ago
Heavy and Bulky
Used a few of these jacks loading plates at a national competition and I would certainly not buy one myself. The jack itself is of quality construction and materials, but its incredibly heavy and bulky. The weight and bulk make it a nightmare to pickup and move quickly. The wheels are a nice feature but are really only especially useful for moving a heavily loaded bar around. The notches that the bar rests in are too small to quickly get the bar jacked up, you often have to manually roll the bar into them or be relatively precise with the jack. Dumping the bar again is also a pain, you often have to rotate the jack so far forward all the wheels come off the ground and then yank the jack out. If space is no concern, you often need to move heavily loaded bars around, and construction quality (durability) is more important than efficiency or ease of use, this is a decent jack. If not, there are cheaper and better options available.
Helpful?
Yes · 1
No · 0
TonyG1972
Harrison Township, MI
★★★★★
★★★★★
2 years ago
Amazing
This bar jack is unbelievable. I can't believe how long I was sliding 45 lb plates down one side, struggling and prob. hurting my final deadlift set in the process. It's so easy to move similar sized plates down to the collars - for what it can do, it's not that heavy to pick up and move if you don't have adequate space to roll it around. So glad I got this - my lifts are benefitting from it. Thanks for a great product, Rogue! I'm a customer for life.
Yes, I recommend this product
Helpful?
Yes · 4
No · 0
Sunny
Iowa
★★★★★
★★★★★
3 years ago
Heavy duty, easy to elevate bar off the floor.
I bought this a month ago as I was looking for something besides using a deadlift wedge. I was debating between this and the Rogue Deadlift Bar Jack. I have seen people using the Rogue Deadlift Bar Jack and would have to use their foot to push down on center square tubing to elevate the bar off the floor since pulling on just the handle wouldn't do it. This model is much better as the wheels make it easy to elevate the bar off the floor by pulling on the T handle and it is easy to roll around to position the bar on the platform. Glad I bought this model.
Yes, I recommend this product
Helpful?
Yes · 5
No · 0
CarlosVizcardo
Diamond Bar, CA
★★★★★
★★★★★
3 years ago
Easy to use. Just buy it!
I had originally purchased the Deadlift Jack (has since been returned). It was okay and it did it's job, but this is 10X better. Night and day comparison. The wheels make it extremely easy to load and unload the barbell and it just looks awesome in your gym.
Yes, I recommend this product
Helpful?
Yes · 7
No · 2
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery