Gift CardsContact UsOrder Status
Live Chat

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
656 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
656 Reviews
Made in U.S.A.
KB-9LB Rogue Kettlebell - E Coat
$30.00
KB-13LB Rogue Kettlebell - E Coat
$35.00
KB-18LB Rogue Kettlebell - E Coat
$40.00
KB-26LB Rogue Kettlebell - E Coat
$55.00
KB-35LB Rogue Kettlebell - E Coat
$65.00
KB-40LB Rogue Kettlebell - E Coat
$70.00
KB-44LB Rogue Kettlebell - E Coat
$75.00
KB-53LB Rogue Kettlebell - E Coat
$85.00
KB-62LB Rogue Kettlebell - E Coat
$105.00
KB-70LB Rogue Kettlebell - E Coat
$115.00
KB-80LB Rogue Kettlebell - E Coat
$125.00
KB-88LB Rogue Kettlebell - E Coat
$145.00
Rogue Kettlebell - E-Coat 26-35-70LB Set
$215.00
Includes 1 of each weight: 26, 35, 70lbs
Rogue Kettlebell - E-Coat 35-53lb Set
$295.00
Includes 2 of each weight: 35lb & 53lb
Rogue Kettlebell - E-Coat 9-70LB Set
$595.00
Includes 1 of each weight: 9, 13, 18, 26, 35, 40, 44, 53, 62, 70lbs

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"
Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).
Loading

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Note: *Due to the casting process, cast products may have minor variances in the finish.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

MADE IN THE USA - CAST IN CADILLAC
1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

DUCTILE IRON
2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

E-COAT FINISH
3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

GLOSS & BRANDING
4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

WIDE SELECTION
5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

Approved for ACFT
6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 656 Reviews
Old Man Rivers
★★★★★
★★★★★
6 days ago
Kettlebell is King
Continuing to build my at-home kettlebell collection. You won't find a better kettlebell for the cost. Love them! Picked up a pair of 70 pounders for heavier squats, thrusters, OH work, et cetera.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Sarapax
Western Mass
★★★★★
★★★★★
1 week ago
Great, but on the heavy side
This kettlebell is very sturdy and nice looking. It might be a little over built though. It's quite heavy to move around.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
TPats
Chicago, IL
★★★★★
★★★★★
1 week ago
Superb Quality
The 24 Kg Ecoat kettlebell is an excellent kettlebell. Clear text, quality coating, zero rough edges from the casting. Perfect for simple and sinister daily routine. Product is made as advertised with fast shipping and also made in America. Highly recommend and will buy future kettlebells from Rogue.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Ryan Pa
★★★★★
★★★★★
1 week ago
Not a huge fan
Not a huge fan. They are huge balls of iron so you're never going to destroy them and they will outlive your grandkids. Dislikes, though : All bell weights are off. I know the industry standard is +/- a few %, but when I order a 70lb bell and an 80 lb bell and the 80 weighs 78.4 and the 70 weighs 72.8, there wasn't really a point for me to get a 70 and an 80. Or, at least, I personally wouldn't have spent the extra $200 for a bell that's only 5. something pounds heavier. Other issue is that the underside of the handle has a seem that is more or less apparent in the bells. I can see the seem in all the rogue bells I have, but in a handful of them it actively scratches you during movements. I also noticed quite a bit of pitting on them. It's not something that effects performance or anything, but just a fit and finish issue you'd expect to be sorted out by the biggest company in fitness, and the bells aren't cheap. I believe I have a 35, 40, 44, 48, 53, 70, and 80. I bought them all within a short period before I had much time to use them, so it's my fault. I think if I could go back I would probably try their powder coat line instead of the ecoat.
Helpful?
Yes · 0
No · 0

Response from Rogue Fitness:

1 week ago
Thank you for bringing this to our attention and we apologize for the weight issue. Our team has looked into this, and your replacements are on the way.
TC MI
★★★★★
★★★★★
1 week ago
Great bell
Excellent feel and balanced weight. Can already tell with the new e coat they’ll never rust!
Helpful?
Yes · 0
No · 0
Pistoleros
Buckeye, AZ
★★★★★
★★★★★
3 weeks ago
Merica!!
I specifically bought these because they are American made. I just recieved mine today. I have not used them yet. They are well made and I love the coating. I'm happy with my purchase.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Rodrick
Pittsburgh PA
★★★★★
★★★★★
4 weeks ago
Nice E coat but inconsistent quality
Nice E coat but poor grinding on the side of kettlebell. A nice bit of it was ground down likely due to casting seam. Not quite a rounded bell. If you can deal with gambling on what get for price and USA made then go for it. Myself on other hand work hard for my money and expect more quality control. It is USA made after all so I expect more from Rogue.
Helpful?
Yes · 1
No · 1

Response from Rogue Fitness:

3 weeks ago
Thank you for bringing this to our attention. Our team is reviewing your kettlebells now and will reach out via email.
Kettlebell Rookie
Watford City, ND
★★★★★
★★★★★
4 weeks ago
Made in the USA
I ordered 2 kettlebells. They showed up promptly in a secure package. No damage to the finish. The finish is smooth but has enough texture to feel secure in my grip. There are no rough casting marks. Plus they are made in the USA and will last a lifetime. I will definitely order more.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery