Hot Deals | On Popular Gear
+
Hundo Pricing | Buy More Save More
+
$75 Max Shipping | With Power Rack Purchase*

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
557 Reviews
Made in U.S.A.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.8
557 Reviews
Made in U.S.A.
Hundo Pricing
KB-9LB Rogue Kettlebell - E Coat
$30.00
KB-13LB Rogue Kettlebell - E Coat
$35.00
KB-18LB Rogue Kettlebell - E Coat
$40.00
KB-26LB Rogue Kettlebell - E Coat
$50.00
KB-35LB Rogue Kettlebell - E Coat
$60.00
KB-40LB Rogue Kettlebell - E Coat
$65.00
KB-44LB Rogue Kettlebell - E Coat
$70.00
KB-53LB Rogue Kettlebell - E Coat
$75.00
KB-62LB Rogue Kettlebell - E Coat
$85.00
KB-70LB Rogue Kettlebell - E Coat
$100.00
KB-80LB Rogue Kettlebell - E Coat
$110.00
KB-88LB Rogue Kettlebell - E Coat
$140.00
Pounds Away From HundoPricing
500LB
Total Price:
$0.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight9LB to 88LB
LengthVaries by weight
WidthVaries by weight
HeightVaries by weight
Other Product SpecsBlack E Coat finish
Handle Diameter9LB-18LB : 1.2"
26LB : 1.4"
35LB-88LB : 1.5"
Product Description
Gear Specs
Shipping
Product Description

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Read More

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Gear Specs

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Shipping

Fast Rogue Shipping

Rogue prides itself on fast, professional shipping, often with same-day turnaround times. Your kettlebells will be packaged safely and efficiently, and you’ll be able to follow the progress of your order from our factory floor to your door using the online Rogue Shipping Tracker. Please note, all KBs over 70LB in weight will ship freight.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

1

MADE IN THE USA - CAST IN CADILLAC

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

2

DUCTILE IRON

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

3

E-COAT FINISH

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

4

GLOSS & BRANDING

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), considerably above that of our standard powdercoat KBs, which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

5

WIDE SELECTION

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

6

Approved for ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Recommended Products

Reviews

1 - 8 of 557 Reviews
Playmaker_41
St. Paul, MN
★★★★★
★★★★★
7 days ago
Top quality
Top-of-the-line kettlebell. Comparable to those from Kettlebell Kings, Perform Better, and the other top brands.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Emad786
Canada
★★★★★
★★★★★
9 days ago
Solid kettlebells
Bought the 24kg/53lbs as a pair and were definitely worth the purchase
Yes, I recommend this product
Originally posted on roguecanada.ca
Little_bison
Livonia, MI
★★★★★
★★★★★
1 month ago
Great quality!
I love this line of American made bells. I live in Michigan and supporting Michigan workers who forged these and and American company is important to me. Highest quality, as always, and fastest shipping! I’ve also had some great interactions with my FedEx delivery guy from all my kettlebell shipments, lol.
Yes, I recommend this product
Helpful?
Yes · 3
No · 0
Kyle Van Kirk
Ozark, MO
★★★★★
★★★★★
1 month ago
Nice KB's, A Little Rough
I bought 1)ea. of: 70, 53, 35, 26, & 9 lb. The grip is really nice, but the logo and printed areas are very rough. Therefore, the bells will catch the threads on your shirts and shorts. I went with these vs. powder coat because they are MiUSA. If I did it again, I would get the powder coated. I may try some silicone or enamel spray to smooth it out.
Helpful?
Yes · 4
No · 0
Triple B
Vermont, IL
★★★★★
★★★★★
1 month ago
Awesome Kettlebells!
Over the last two months I ordered two sets of kettlebells, a pair of 44lb and a pair of 53lb. I love them! They are well made, made in America, and the E Coat is awesome. They look good, feel good, and take chalk well. They were shipped in a timely manner and I could track thievery step of the way. I can't wait to order some more.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Oklahoma City, Oklahoma
★★★★★
★★★★★
1 month ago
Perfect!
Great kettlebells made right here in the USA. Shipped fast too! These are my go to bells and Company. Thanks!
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
RIan
Redwater, AB
★★★★★
★★★★★
2 months ago
Great American made Kettlebell
I had debated and looked at other Kettlebells but Rogue's stood out to me because they are American made. I am thrilled with the quality, fit and finish of the E-Coat Kettlebell.
Yes, I recommend this product
Originally posted on roguecanada.ca
Fred8
Boston, MA
★★★★★
★★★★★
2 months ago
Perfect
I don't actually have anything to compare these to because I'm new to kettlebells, but I'm very pleased with the 35 lb bell I bought. After a month or so of swings and get-ups with it I'm ready to purchase a 53 lb bell and will be buying the same line. Best features: 1. Look -- especially next to Rogue E-coat plates. 2. Feel -- very natural, if a little slippery -- perfect with chalk 3. Balance -- sits perfectly in my hands/hand for swings and get-ups. 4. Maintenance -- basically none required. Chalk basically disappears off the thing after a workout and what little remain comes off easily with a single wipe from the towel I use to clean my sweat off the bell.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery