Rogue Monster Plate Storage Pin

★★★★★
★★★★★
4.7
26 Reviews
Made in U.S.A.

Rogue Monster Plate Storage Pin

★★★★★
★★★★★
4.7
26 Reviews
Made in U.S.A.
$62.50

Length*

6"
12"

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Length6.75" or 12.75" (loadable length)
Diameter1.9"
Steel NotesMachined Black Zinc plated metal components
Other Product SpecsMachined Acetal Plastic Post with steel core
Product Description
Gear Specs
Shipping
Product Description

Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.

Read More

Rogue Monster Plate Storage Pins

Utilizing the same precision machining techniques that we apply to our barbells, the newly redesigned Monster Plate Storage Posts provide a tighter fit on the uprights and a firmer hold for the hubs of bumper plates. We’ve also included the ultra wear-resistant thermoplastic material Acetal to form a protective exterior sheath that delivers a sleeker, more uniform appearance than standard UHMW plastic.

The Monster Plate Storage Pin is available in two styles (Keyhole and Keyless) and two lengths (6.75” or 12.75” loadable length). All versions are intended exclusively for use with Rogue Monster Series power racks, rigs, and wall-mount units, and are NOT compatible with our Infinity or Econ lines. You can order your Monster Pins in a multitude of package options: single, pair, 4-pack, or 8-pack.

Patented

Gear Specs

Specifications:

  • Made in the USA
  • Bumper Plate Storage Posts - Exclusively for Rogue Monster Series Racks & Rigs
  • Available Individually, in Pairs, or as 4-pack or 8-pack
  • Post Diameter: 1.9"
  • Post Lengths: 6.75" or 12.75" (loadable length)
  • 12.75” Pin Capacity: 180LB of bumpers and up to 540LB of steel plates.
  • 6.75” Pin Capacity: 180LB of steel plates / Ideal for storing your change plates and smaller increments of steel.
  • Machined Acetal Sheath
  • Acetal Washers
  • Keyhole and Keyless options
  • Threaded Nut comes standard for tightening (optional Knurled Knob also available)
  • Metal Finish: Black Zinc
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

THE TWO STYLES OF MONSTER STORAGE PIN:

Keyhole Pin: Includes a specialized nub for installation into the keyholes of a Monster rack/rig. NOT compatible with standard 1” holes.


Keyless Pin (no nub): Designed to be compatible with the keyholes AND the standard 1” holes of a Monster rack/rig.

Note: All metal parts of the post, regardless of the size and variation, are finished in Black Zinc.

1

Threaded Post w/ Acetal Cover

Consists of a 1" diameter threaded pin and 1.9" OD machined Acetal plastic sheath. Acetal is a high-end thermoplastic material noted for its light weight, low-friction, and wear-resistant qualities. It offers a unique combination of strength, rigidity, and dimensional stability beyond that of traditional plastic coatings, not to mention a more consistent, uniform appearance. We've also included (2) Acetal Washers that sandwich each side of the upright to keep the powder-coat protected from any damage.

2

Keyhole & Keyless Options

Customers can choose between our standard Keyhole Pin, which features a machined nut with a special nub designed to fit the keyhole of our Monster racks; or a Keyless variation, which is designed to fit the keyholes AND the standard 1” holes of a Monster rack. Both versions are made to ensure a tight fit that won’t allow sagging or spinning even when the post is fully loaded.

3

Choice of Threaded Nut or Knurled Knob

The storage pin comes standard with a machined nut that goes through the threaded end of the post, on the opposite side of the upright from where the plates are stored. Users can tighten this nut with one of our 1" Monster Wrenches (these wrenches come standard with our Monster Racks but can also be Purchased  a la carte). As an alternative, customers can also opt to purchase our new Monster Knurled Knob, which enables the adjustment of the post’s height WITHOUT the need of a wrench or other tools. Available as a single or a pair, this patent pending machined knob includes an acetal insert on one side (to protect the customer’s uprights) and a knurled outside surface with a black zinc finish. It measures 2.125" in diameter, weighs 0.57 LBS, and is compatible ONLY with our 1" threaded pins (or 1" hardware).

Recommended Products

Reviews

1 - 8 of 26 Reviews
Going rogue
Wyoming
★★★★★
★★★★★
4 weeks ago
Keyless monster weight plate holders
Well built, I like the keyless better than the one with the key because you will have more mounting options.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Ajay
Vancouver, BC
★★★★★
★★★★★
April 7
Works great work any 3x3 rack
Purchased for my 3x3 rack which is not rogue but still works and fits prefectly
Yes, I recommend this product
Originally posted on roguecanada.ca
Julie_Canada
Ontario, Canada
★★★★★
★★★★★
March 21
Best pin for power rack
Top notch quality, and there is no movement at all on the rack. These are pricey but absolutely worth the money. p.s. I did not have the opportunity to purchase a Rogue rack but have a 3 x 3 with 1 inch holes. The *keyless* version works perfectly.
Yes, I recommend this product
Originally posted on roguecanada.ca
Mattk
San Diego
★★★★★
★★★★★
February 11
They SAG
I bought a set for my Monster squat stand. They have a noticeable sag when loaded.
Helpful?
Yes · 5
No · 0

Response from Rogue Fitness:

February 19
We are reaching out now to take a deeper look into this with you.
Lift in Colorado
Colorado
★★★★★
★★★★★
Dec 2021
Great Storage Pins
Bought the 6 inch storage pins. Allows me to move around the rack easily. Each pin holds 4 45lb olympic plates. With 8 pins around the rack I can store different size plates. With this set up easy to take off and on during a workout.
Yes, I recommend this product
Helpful?
Yes · 4
No · 1
John Doe
Calgary, Canada
★★★★★
★★★★★
Oct 2021
Excellent storage
I bought a set of 4 2 months ago, easy to install and work as expected
Yes, I recommend this product
Originally posted on roguecanada.ca
Guyy
Edmonton
★★★★★
★★★★★
Sep 2021
Works as hoped
Was able to jury rig these to fit on my tydax squat stand. Very sturdy
Yes, I recommend this product
Originally posted on roguecanada.ca
Mk88
★★★★★
★★★★★
Jul 2021
Smooth and Awesome
The standard for plate storage. Lined with plastic, made of steel. All you could ask for.
Helpful?
Yes · 2
No · 1
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery