Monster Rack Storage Panel

★★★★★
★★★★★
5
1 Review
Made in U.S.A.

Monster Rack Storage Panel

★★★★★
★★★★★
5
1 Review
Made in U.S.A.
Monster Rack Storage Panel
$120.00

Edition*

24" Rack Storage Panel
30" Rack Storage Panel (+$5.00)
43" Rack Storage Panel (+$15.00)

Mount Type*

Bright Zinc
Black Zinc (+$12.00)
Rack Storage Panel Hangers
$18.50
Monster Rack Mount 4-Bar Hanger
$80.00
Rogue Rail Mount Hanger - Pair
$35.00
Side Winder Rack Storage Panel Bracket
$60.00

Gear Specs

BrandRogue Fitness
Made In USAYes
Length24" / 30" / 43"
Width3" (depth)
Height12"
Steel Notes11 Gauge Steel Panel
Other Product SpecsNot for use as a structural crossmember. Accessories not included
Product Description
Gear Specs
Shipping
Product Description

A great way to add versatile storage capacity to any existing Monster Series rack or rig, our 11-gauge steel Rack Storage Panels include 5/16” thick endplates and a set of (4) 1” bolt assemblies for easy installation (a separate Monster Lite version). There are three different lengths to choose from—24”, 30” and 43”— meaning you can mount a panel between the two back uprights of your rack and/or between two side uprights, depending on the depth of the unit. Customers can also select a hardware finish of bright zinc or black zinc to match their existing set-up.

Read More

RACK STORAGE PANELS - MONSTER

A great way to add versatile storage capacity to any existing Monster Series rack or rig, our 11-gauge steel Rack Storage Panels include 5/16” thick endplates and a set of (4) 1” bolt assemblies for easy installation (a separate Monster Lite version). There are three different lengths to choose from—24”, 30” and 43”— meaning you can mount a panel between the two back uprights of your rack and/or between two side uprights, depending on the depth of the unit. Customers can also select a hardware finish of bright zinc or black zinc to match their existing set-up.

All of our Rack Storage Panels are manufactured in the USA from US steel, with laser-cut Rogue branding and a medium-gloss black powder coat finish. The center section of each panel features a row of tear-drop Monster keyholes (spaced vertically and horizontally 2” on center), while the top and bottom portions include standard 1” holes (spaced 2” on center horizontally). We’ve left recesses in the back of the panel for tightening mounting hardware. Please Note: Customers who have a rack pushed all the way against a wall may need to pull the rack out in order to access and tighten the panels with a wrench.

Whether you install one panel or several, the space efficient design offers compatibility with various standard Monster accessories (including the Monster Plate Storage Pin and Monster Attachment Post, as well the a la carte options below.

Patent Pending

Gear Specs

Specifications:

  • Made in the USA - 11-gauge Steel
  • Patent Pending Design
  • Sold Individually
  • Compatible with Monster Series Racks and Rigs
  • Compatible with Monster Accessories (not included)
  • Three Length Options: 24”, 30”, 43”
  • Width: 3”
  • Height: 12”
  • Laser-cut Rogue branding
  • MG Black Powder Coat finish
  • 5/16” thick endplates
  • (4) 1” Bolt Assemblies Included
  • Hardware Finish Options: Bright Zinc or Black Zinc


Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Compatible Attachments Available a la carte:

Single Hook Hanger
This 2.5” long x 1.125” wide hook can be used to hang a variety of items including a belt, jump rope, vest, etc. MG Black finish

Multi Use Hanger
This larger hanger includes (6) hooks measuring 1” wide x 6.25” long. Ideal for storing Monster Bands, belts, and jump ropes. Mounting pegs are 10” on center. MG Black finish.

Storage Bin Hanger
This attachment offers (7) front vertical tabs (1” wide) for hanging accessories, plus a 13” wide x 5.75” deep bin that’s great for storing chalk, wrist wraps, straps, collars, etc. MG Black finish.

Rail Mount Hanger (Pair)
Can be set on the top of the Rack Storage panel to open up even more storage options. These 6” long steel hooks are great for collars, knee sleeves, gym towels, etc. Texture black powder coat finish.

Monster 4-Bar Hanger
Enables up to 4 barbells to be securely stored vertically off of the Rack Storage Panel. MG Black finish.

Side Winder Bracket Pair
Allow users to offset the Rack Storage Panel from being inline with the two uprights of the rack. This is specifically beneficial for users who have a Slinger and would like to set up a Panel between the same two uprights.

IMPORTANT: Rack Storage Panels are NOT designed to be a replacement for a rack’s structural crossmember. They should only be used in addition to the standard crossmembers included with a rack/rig.


KEY FEATURES OF ROGUE’S RACK STORAGE PANELS

1

Customize Your Attachments

Our Monster Rack Storage Panels provide another way to fully utilize an existing Monster rack or rig, as the upright-mounted panels are compatible with a wide array of special a la carte attachments, as well as existing 1” Monster accessories such as the Monster Plate Storage Pin and Monster Attachment Post. The panel’s combination of standard and keyhole-style holes offer loads of additional possibilities for true customization.

2

3 Size Options

As another means of adding functional versatility, we’re offering the Rack Storage Panels in three different lengths: 24”, 30”, and 43”. This allows gym owners to attach panels across the two back uprights of a Monster rack (43”) and/or across two side uprights in a 24” or 30” depth rack. All sizes of the panel measure the same 3” in depth and 12” in height.

3

Quality Rogue Construction

Each panel is manufactured in the USA from 11-gauge US Steel with laser-cut Rogue branding and an MG Black powder coat finish. Recesses in the back of the panel are included for tightening the mounting hardware, which can be selected in a bright zinc or black zinc finish to match your existing rack/rig.
Important: Not intended use as a structural crossmember.

4

Multi-Panel Setups

Because it measures 12” in height, it’s easy to sequence multiple Rack Storage Panels flush against one another on one side of a rack, maximizing the storage capabilities of the unit. Gym owners can also purchase multiple panels for attaching to different sides of the same rack/rig (this may require selecting different panel lengths).

5

Loads of Gear Within Arm's Reach

The unique design of the Rack Storage Panel offers a space efficient means for storing everything from change plates and OSO collars to weightlifting belts, resistance bands, speed ropes, and a whole assortment of other small gear. It’s a new addition to the wider family of Rogue storage equipment.

Recommended Products

Reviews

1 - 1 of 1 Reviews
JNG155
Waterloo Region, Ontario, Canada
★★★★★
★★★★★
2 months ago
Heavy Duty
I have two 36"x36" Monster Storage Panels made from three 30" panels bolted between two 36" Monster Strips. Fully assembled each one weighs 127lbs! The shelves and hangers were not available when I placed my large order. Looking forward to getting those soon!
Yes, I recommend this product
Originally posted on roguecanada.ca
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery