Rogue Rig Shims
Featuring the same dimensions and laser-cut steel as our foot plates, Rogue Rig Shims can help compensate for uneven flooring by working as a virtual extension of an existing upright.
When & How to Use Rogue Rig Shims:
When setting up a rack or rig, Rogue always suggests holding off on fully tightening all hardware until the entire unit has been assembled. If you’ve followed these instructions and still find that one or more of your uprights isn’t flush with the floor, it may be because the floor itself isn’t level. Rogue Rig Shims can solve this problem by sliding securely into the gap between the floor and the bottom of the upright, stabilizing the rig in the process.
- Made from Laser-Cut Steel
- Dimensions: 5" x 7”
- Available in Two Thicknesses: 14ga. (5/64”) or 1/4”
IMPORTANT: These steel shims are compatible ONLY with Rogue Infinity, Monster, or Monster Lite systems. They should not be used with the Echo line of rigs and racks. This is a bare steel product. Like all bare steel items, this product will oxidize over time if left uncoated.