Gift CardsContact UsOrder Status
Live Chat

Rogue TB-1 Trap Bar 2.0

★★★★★
★★★★★
4.6
22 Reviews
Made in U.S.A.

Rogue TB-1 Trap Bar 2.0

★★★★★
★★★★★
4.6
22 Reviews
Made in U.S.A.
$325.00

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight60LB (+/- 2LB)
Length89"
Width28.5"
Height3"
Diameter1.34" (Handles) | 1.91" (Sleeves)
Steel Notes1.5" x 1.5" Square Tube
Other Product SpecsKnurled Handles
16" Loadable Sleeve Space
Bar UseSpecialty
Product Description

Version 2.0 of the Rogue TB-1 Trap Bar features the same general design and dimensions of the original, but with an updated, precision sleeve construction that reduces the starting weight of the bar by more than 25 percent. This makes the TB-1 easier to maneuver without limiting its effectiveness. Simply put, if you want to lift massive weight, this tool still belongs in your arsenal.

Read More

Rogue TB-1 Trap Bar 2.0

Version 2.0 of the Rogue TB-1 Trap Bar features the same general design and dimensions of the original, but with an updated, precision sleeve construction that reduces the starting weight of the bar by more than 25 percent. This makes the TB-1 easier to maneuver without limiting its effectiveness. Simply put, if you want to lift massive weight, this tool still belongs in your arsenal.

The Trap Bar’s hexagonal design and knurled, neutral grip handles make it optimized for performing deadlifts that put less stress on the lumbar spine—since the load is centered and not off axis like a traditional deadlift. This same benefit makes the TB-1 2.0 a useful specialty bar for beginners, as well as athletes dealing with nagging back issues or rehabbing from other injuries.

We manufacture the TB-1 in Columbus, OH, and it's fully compatible with standard Oly plates.

Approved for the new Army Combat Fitness Test (ACFT)

This product has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that’s replacing the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

IMPORTANT: Some standard barbell collars may not work on this specialty bar. We recommend using Axle Collars with this barbell.


Patented

Gear Specs

Specifications

  • Neutral Grip Handles, Spaced 25” on center with easy-grip knurling, 1.34" diameter
  • Newly Redesigned Olympic Sleeves: Schedule 80 with Welded Caps, 1.91” diameter
  • 16" Loadable sleeve space
  • Finish: Signature black powder coat
  • Weight: 60LB (+/- 2LB) (unloaded)

*PLEASE NOTE: Because the TB-1 Trap Bar 2.0 is finished in our Rogue signature black powder coat, any metal-to-metal contact with the coated sleeves (such as adding and/or removing plates) may cause wear on the finish over time.

See Also:

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Frequently Bought Together

Loading
Rogue TB-1 Trap Bar 2.0
$325.00
Loading
The Dead Wedge
$15.45
$17.95

No items selected

Total Price
$0.00

Axle Collars Compatible with This Specialty Barbell:

Recommended Products

Reviews

1 - 8 of 22 Reviews
chiefb711
Fayetteville, NC
★★★★★
★★★★★
1 week ago
Great overall!
Aggressive grip, nice wide stance, also great to not have additional grips in the way. Sleeves are a bit small for normal clamp collars.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Alejandro D
Phoenix, AZ
★★★★★
★★★★★
April 20
Great bar but collars don’t fit
Love the bar, very sturdy and looks great. The only issue is I ordered a pair of collars as well (Rogue USA Aluminum collars - magnetic) and they don’t fit. The collar is to loose and causes the weights to slip during exercises. A little disappointing
Yes, I recommend this product
Helpful?
Yes · 1
No · 0

Response from Rogue Fitness:

April 26
Thanks for leaving a review on the TB-1! Some standard barbell collars may not work on this specialty bar. We recommend using Axle Collars with this barbell.
Brad G
Lowell, MA
★★★★★
★★★★★
February 13
Well worth it!
This trap bar is the real deal - solid construction and I'm not worried about beating it up one bit. The only minor downfall is that the powder coat makes it difficult to pull the boneyard plates off, but it's nothing that can't be overcome. Looking forward to my next Rogue purchase. Love that you guys stick to the made in USA roots.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
J Nate
Idaho
★★★★★
★★★★★
Dec 2023
Rock solid
Excellent trap bar. Really beefy and stout. Great knurling on the handles. A few reviews have mentioned standard collars don’t work — yes, these are axle bar sleeves. You will need axle collars. Other reviews mention no center knurling on handles. This really isn’t a big deal. It’s very easy to line your knuckles up with the sleeves to ensure your hands are centered. Really nice bar. Would buy again for sure
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
awe gfw
★★★★★
★★★★★
Jul 2023
Very sturdy
Hefty, well built bar. Just wish it had a center stripe on each handle to know where the balance point is
Helpful?
Yes · 0
No · 0
Jordan N
Moscow, ID
★★★★★
★★★★★
Jun 2023
Excellent bar
Rock solid — typical Rogue quality. Bar has a heavy, yet wonderfully balanced, feel and weight. Knurling is gritty and grabby. Some reviews of this bar complains there is no center knurling; however, it is very easy to grab the bar and line your middle knuckle up with the sleeve — making it perfectly balanced when the bar is picked up. Another complaint of this bar from reviewers is their regular collars don’t fit (too big) and plates aren’t tight on the sleeves —- this trap bar has axle sleeves and aren’t your regular barbell sleeves. They are specifically designed to axle bar specs. As such, they are a fraction smaller in diameter, so there will be a tiny amount of play on the plates, and you will also need to buy axle collars or lift without. All of this is 100% normal and not a defect. I hesitated purchasing this bar for awhile, but wish I would have done it sooner. I use it for a lot of primary lifts, and a lot of accessory work too. Can’t go wrong with it.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Charlotte Nc
★★★★★
★★★★★
Sep 2022
Solid construction, industrial strength & durable
Owned it for over two months now, use it two to three times weekly. No issues when lifting heavy if I need to drop it as the bar is very solid, just wish it had centering marks on the grips though, would prevent the need to adjust grip with heavy loads at times.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Amazing balance
Orlando, FL
★★★★★
★★★★★
Jun 2022
It's an amazing beast!
The knurling: knurling is maybe the most annoyingly subjective topic of barbell reviews. I read one review that this knurling is extreme. It's not. If you like the knurling on the Rogue power bar, this is close, but not as aggressive. The balance: I bought this to upgrade from a CAP trap bar (you know it). The CAP bar claimed a 53lb weight. The Rogue TB-1 claims a 60lb, but it's balance and distribution make it very easy to move around, stand up, lay down. I can also use my bar jack with this, just like a regular barbell.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery