Daily Shipping Deals

BUY 3 OR MORE 3 SHIPS FREE ITEMS AND THEY SHIP FOR FREE Shop Now

FREE SHIPPING ON SELECT ITEMS Shop Now

BUY A RIG* AND YOUR ENTIRE ORDER SHIPS FREE See Details

ORDERS OF $5K SHIP FREE See Details

Monster Single Bar Holder

Monster Vertical Mount Single Bar Holder
$64.00
Monster Horizontal Mount Single Bar Holder
$64.00

**WARNING: The Rogue Single Bar Holder should NEVER be mounted below a pull-up bar, and ALWAYS on the exterior of a Rack/Rig/Squat Stand. Failure to follow these guidelines may result in severe injury.

Monster Single Bar Holder

The Monster version of our space-efficient Single Bar Holder includes 1-inch bolts and fasteners, with mounting plate holes 6” on center. Attached to any Monster Series rig, rack, or squat stand, the Bar Holder's 7-inch steel storage tube will work with most standard Olympic barbells, stabilizing the bar upright and protecting its knurling from unnecessary wear and tear.

The mounting plate on this barbell storage system is uniquely designed to give you the option of a vertical mount (recommended on racks and rigs) or horizontal mount (for squat stands). In either instance, the Single Bar Holder should be mounted only on the exterior of the unit, and never directly under the area reserved for pull-up bar use.

Monster Single Bar Holder Specifications:

  • Made in the USA
  • Dimensions: 5 1/4" x 3" x 11"
  • Steel Tube: 7” height, 2” inside diameter
  • 1” bolts and fasteners
  • Holes in Mounting Plates 6” on Center
  • Mounting Hardware Included

Important: This barbell holder is compatible only with Rogue Monster Series Rigs, Racks & Stands. For our Infinity and Monster Lite version, see the standard Rogue Single Bar Holder.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Length 5 1/4"
Width 3"
Height 11"
Other Product Specs Holes on mounting plate at 6" on center. Mounting hardware included.
Steel Notes 2" Inside diameter steel tube.
Monster Compatible Yes
Monster Single Bar Holder is rated 4.3 out of 5 by 40.
Rated 5 out of 5 by from Great product Serves its purpose perfectly strong and keeps my barbell neatly in place out of the way
Date published: 2021-04-08
Rated 5 out of 5 by from Does it’s job perfect Great little add on. Smooth bevel. Hold barbell perfectly with out worrying about damaging the sleeves.
Date published: 2021-03-01
Rated 4 out of 5 by from Vertical Holder Needs Longer Mounting Bracket It does what it's supposed to do. Only complaint with the vertically mounted bar holder is that I'm unable to mount it to the lowest holes on my RML-3 rack because the upper hole of the bar holder's mounting bracket intersects with the lower horizontal members on the rack which are welded in place and won't allow me to pull a bolt through. It would be nice to have it at the lowest position on the rack because my garage gym ceiling is relatively low and I really need to be careful not to hit the bar with it when storing it.
Date published: 2021-02-04
Rated 5 out of 5 by from Vertical holder very sturdy Vertical holder is ergonomically placed in the rack and sturdy
Date published: 2021-01-28
Rated 5 out of 5 by from Make sure it is what you want and need Short story: they are what they are = bar holders. Yes, the bar must be inserted gently; and, yes, my labels where peeling off when they were delivered (in Arizona, in 110+ degree weather); but, I pressed the labels back on and they haven't been a problem since. Note: my gym is setup inside my air conditioned home, not my garage. Long story: I mixed oranges with apples. I bought two of the horizontal mount bar holders as part of a $5,000 ships for free order that included my RM-6 power rack. My total order was almost $5,000 to the dollar and was based on 30+ years of lifting experience in numerous gyms. I bought a full rack because I prefer a full rack to a 1/2 rack. But, a Nautilus 1/2 rack at one of those gyms had holders like these that were mounted vertically on the same column as the plate storage. They also had vertical bar holders in their Cross-Fit area. I am a big fan of everything having its place and tried to recreate that tidiness. But, I had issues. I foresaw that vertical bar holders would not work on the column with my weight plates because the cathedral ceiling at that point in the room was too low. So, I went with the horizontal mount - one for my Power Bar and one for my Deadlift Bar. I originally mounted them near my plates; but, later moved them out of that area so I could hop through that part of the rack when changing plates. When company is coming over, the bar holders are a good, secure place to store my bars nice and tidy. But, these bar holders are a lot easier to use with a 1/2 rack or in an open area than they are in the limited area of my home gym and the enclosure of a full power rack. I created my own single bar gun rack for my Power Bar ( using 8" bolts, flat washers, & short lengths of thick wall 1" ID PVC on one side of the Monster rack posts with lock washers, and nuts on the other) When I am done using my bar, I just press it overhead and rack it. My Power Bar never leaves the squat/bench area of my rack. And, my deadlift bar normally just stays in my deadlift area with my base warm-up plates on it when I am not using it for deadlifts or rows. (Rowing with a deadlift bar? Cheater, cheater. Hey, it is easier to grip and the bar's whip isn't much of a factor until the load is 400+#). I have considered buying 10 kg and 15 kg bars because there are times, like injury recovery, that a lighter bar would be useful. Then, Rogue's 3 bar gun rack for the Monster racks would make sense; I would love UHMW protection. But, I really want to walk upright underneath the racked bars so I wish that Rogue made single bar, or maybe two bar, gun racks for use with the Monster racks.
Date published: 2021-01-26
Rated 5 out of 5 by from Vertical Holder - Gets the job done I have an SML-1 rack and preferred a vertical stand than a horizontal one for space purposes. When you install it at the bottom, screwing in the holder is a bit hard because there's little space there, but it's really not a problem. As others have stated, there is nothing at the bottom within the holder, so your bar rubs along the inner metal tube when you place it in. I personally don't care much about the very little cosmetic damage it has caused (although I really don't see none on my bar) because I slowly wiggle my bar to the bottom while holding it. I'm sure you can scratch up your bar if you just let it go and let gravity take its course, which explains other people's comments... Anyway, works like a charm!
Date published: 2020-12-06
Rated 4 out of 5 by from Mounted to the Olympic Plate Tree I bought this to Mount to my Olympic Plate Tree 2.0, and it mounts perfectly. Great storage for my extra barbell. Only reason that this is not a 5 star review is due to the lack of protection inside the holder. The bare steel can absolutely scratch up sleeves and could do so well with some UHMW. I lined mine with UHMW tape, which works well, just was time consuming.
Date published: 2020-12-05
Rated 5 out of 5 by from Space saver Exactly what was needed for a safer option to store our bars. Also saves us on space. Great accessory.
Date published: 2020-12-04
  • y_2021, m_4, d_18, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_en_US, sid_XX11363, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue