Monster Single Post Storage Shelves

Monster Single Post Storage Shelves are designed exclusively for mounting to the uprights of an existing Rogue Monster Series rack or rig. They come in 3 sizes ( 30", 43" & 70") and two shelf styles (bumper/medball and kettlebell).

All variations of the Monster Single Post Shelves are made in the USA and include 2x2", 0.125” thick steel rails + 0.25" thick laser-cut steel endplates and an MG Black powdercoat finish. We’ve also created special formed tabs that are bent out from the endplate to help prevent the shelf from spinning. You can easily mount the shelves using a single 1" x 4.75" Monster bolt assembly on each side (all hardware for mounting is included standard). 

For a stand-alone, customizable storage unit for all your gear, be sure to also check out the Monster Mass Storage System.

Shelf Width Options:

• 30" - Fits within a 30" wide section of rigs & racks
• 43" - Fits between the uprights of any Monster power rack or the Monster collegiate half racks. This width can also be used in any of the 43" sections of the Monster Rigs
• 70" - Fits within a 70” wide section of a Monster Rig

Shelf Styles:

• Bumper/Medball - Items are stored atop/between the two steel rails to keep them stabilized. Weight: 29LB (30"), 32LB (43") or 46LB (70")
• Kettlebell - Includes an additional metal tray that drops on top of the two rails, created a flat surface for kettlebell storage. Weight: 22LB (30"), 60LB (43") or 96LB (70")

Optional Kettlebell Shelf Liners:
Rogue’s Kettlebell Shelf Liners offer an effective way to prevent metal-to-metal contact between your shelves and the equipment stored on them. Made from 6mm-thick, waterjet-cut rubber, these liners are available in 3 sizes to correspond with your selected shelf width (30”, 43”, or 70”). A roll of double-sided carpet tape is also included for securely affixing the rubber to the shelf. Sizing specs below:

• 30” Liner : 28.625” Long x 9.5” Wide x 0.23” Thick
• 43” Liner : 41.5” Long x 9.5” Wide x 0.23” Thick
• 70” Liner : 68.5” Long x 9.5” Wide x 0.23” Thick

Patented