Daily Shipping Deals





Rogue MLW-4 - 4' Monster Lite Wall Mount

MLW-4 Rogue 4' Monster Lite Wall Mount
Concrete Anchor Kit for 4' Wall Mount
43" Dirty South Bar - Substitute

Can only be used as a substitute when purchasing an Infinity/Monster Lite rig, rack and/or squat stand

70" Dirty South Bar - Substitute

This substitute is priced for purchase with an Infinity or Monster Lite rig only

Free Shipping Item

This Item Ships For Free

Cont. US 48 Only

The Rogue MLW-4 Monster Lite Wall Mount System will turn any garage into a world class training facility, without breaking the bank. The MLW-4 will easily become the most utilized piece of any home gym.

This compact setup combines the durability of 3 X 3" 11 Gauge Steel Uprights with 5/8" hardware making it compatible with Rogue Infinity crossmembers.

Monster Lite Specifications

  • Length Customizable X 6' Width
  • Made with 3 X 3" 11 Gauge Steel
  • 5/8" Bolts and Fasteners
  • West Side Hole Pattern – 1" through bench and clean pull zone then 2" spacing above and below
  • Pull-up Bar height is adjustable - 8’, 7’ 6” or 7’
  • (2) J-Cups with UHMW plastic inserts per 4’ rack section
  • Unit must be bolted to the floor
  • Unit must be bolted to the wall. Wall mounting hardware is NOT included.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight 198lb
Length 4'
Width 6'
Height 9'
Material Type Powdercoated Steel
Steel Notes 3 X 3" 11 Gauge Steel
Foot Print 4'5" x 6'3"
Rogue MLW-4 - 4' Monster Lite Wall Mount is rated 5.0 out of 5 by 8.
Rated 5 out of 5 by from Rig is total boss mode This rig is total hossville. Assembly was simple. So sturdy and so awesome
Date published: 2018-01-26
Rated 5 out of 5 by from Perfect for a garage gym! I have a MLW-14 in my garage and it is perfect for my wife and I. We each get our own squat/bench station and there are enough pull up stations for a garage full of people. It is absolutely rock solid. If my house burnt down this would probably be the only thing still standing.
Date published: 2017-12-16
Rated 5 out of 5 by from MLW-4 Perfect for Garage Gym The Rack is rock solid and top notch quality. Couldn't be happier. If you are not on a concrete wall and have to mount to dry wall, the rack is not the right dimension to pick up the studs. I attached a drawing using 15-3/4 shelf board cut to 74" length that picks up studs to give a solid mounting surface for the rack. Hope it helps.
Date published: 2014-12-22
Rated 5 out of 5 by from Excellent Rig I just purchased this over the Black Friday/ Cyber Monday sale, saved a ton of money. Shipping was very fast, everything was secured and arrived undamaged. This rig is stout! Very happy with my purchase, garage gym looks awesome.
Date published: 2014-12-10
Rated 5 out of 5 by from Perfect for the garage gym This thing is a monster, perfect for the at home box. Right down to the packaging Rogue didn't over look a spec. on the MLW-4. Far exceeded my expectations, a must have for any garage gym. Assembly of the rig itself took less than 30 minutes.
Date published: 2014-10-15
Rated 5 out of 5 by from Pull up Options I've been looking at this rack for a while and finally pulled the trigger....needless to say, outstanding product, but you already know that. With free shipping it was only $30 more than the infinity wall mount! For delivery be ready for UPS to roll up with a semi truck! What I did different....you can customize this bad boy free of charge. Rather than have 3 cross members with the standard 2 bars each. I added a single fat bar, single skinny bar, and a 3x3 crossmember to which I added the "3 inch pull up spheres". It's still solid as a rock and I have 3 different pull up options now.
Date published: 2014-10-09
Rated 5 out of 5 by from Awesome Product I ordered the MLW-4 and it arrived, I think even before I received the confirmation email, which was sent, hmmmm, immediately. The point is, that it arrived super fast. Fixing the uprights to my concrete floor was kind of a pain because drilling into post tension concrete slabs is moderately challenging, especially if you don't have a legible blueprint of the post-tension cable grid. Buying a good hammer-drill and masonry bit was key to my success and eased the pain of drilling the holes. My biggest mistake was not ensuring my drilled holes were perfectly straight, so dropping my anchors were kind of tricky. Now, if all of my pre-installation steps (drilling holes, and preparing the wall for the wall-mount side) were efficiently done then the actual installation process would have been an ease. Heck, it's 5 parts in entirety so the assembly was a cinch. I run a small HIIT gym out of my 700sqft garage and I have 3 people doing all sorts of pull-ups, ring dips, etc. on the rack at a time, and that thing doesn't move, sway, dip...nothing. I'm expanding my gym and will be buying the mlw-10 in the near future. As usual, this is another solid Rogue piece of equipment.
Date published: 2014-05-21
Rated 5 out of 5 by from Great Equipment I purchased the MLW - 4 in my 3rd bay garage. I love the versatility of it, pull ups, bench, squats, plus other accessories can be added. It is fantastic and accommodates short guys like me (with the many milled holes all around). I would highly suggest this item for anyone that may have doubts. Good, solid, easy to assemble, great value for price, you can't go wrong with Rogue.
Date published: 2014-05-16
  • y_2018, m_5, d_20, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_XX6847, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue