Daily Shipping Deals

BUY 3 OR MORE 3 SHIPS FREE ITEMS AND THEY SHIP FOR FREE Shop Now

FREE SHIPPING ON SELECT ITEMS Shop Now

BUY A RIG* AND YOUR ENTIRE ORDER SHIPS FREE See Details

ORDERS OF $5K SHIP FREE See Details

Rogue Bolt-Together R-3

Bolt-Together R-3
$725.00
R-3 Concrete Anchor Kit
$14.00
(8) Concrete Anchors.
Infinity Strap Safety System 2.0 - 24"
$180.00
Infinity Strap Safety System 2.0 - 30"
$185.00

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Length 24" or 30"
Width 43"
Height 90 3/8"
Steel Notes 2 x 3" 11-Gauge Steel
Foot Print 34" or 40" x 53"

Rogue Bolt-Together R-3 Power Rack

Bolt-Together Version of the Classic Westside Barbell Rack

The Bolt-Together Rogue R-3 Rack features the same 2x3” 11-gauge steel uprights (90” tall), 5/8” hardware, and Westside hole spacing as the standard R-3, but with a set-up optimized for shipping to an APO address and/or more easily maneuvering into a training space with a tight staircase or low ceiling.

As part of the Rogue Infinity R-Series, the R-3BT offers superior durability and versatility in a compact frame: 24” inside depth, 53” x 34” footprint. This makes the unit equally well suited to large-scale pro and college facilities as well as small garage gyms. A 43” Fat/Skinny Pull-Up Bar, along with sets of Infinity J-Cups, Pin/Pipe Safeties, and Band Pegs, are included with the package. You can make multiple custom additions to your order using the choices from the drop down menu on this page.

Important: This rack must be bolted to the floor before use.

Variations on the R-3 Power Rack include:
Standard R-3 Power Rack
The R-3W Fold Back Wall-Mount Rack

See Also: The Complete Rogue Infinity R-Series

Additional Specifications:

  • Made in the USA
  • 2x3" 11-gauge Steel
  • 5/8” Bolts and Fasteners
  • Westside Hole Pattern – 1” through bench and clean pull zone then 2” spacing above and below
  • Inside Rack Depth: Choice of 24” or 30”
  • (1) Fat/Skinny Pullup Bar - 1.25” and 2” Pull-up bar at 7’ 6” Height
  • (2) Infinity J-Cups, (2) Pin/Pipe Safeties, (4) Band Pegs
  • Black Powder Coat Finish
  • Unit must be bolted to the floor
  • You can add bars, plates and bench by selecting them on the drop down, as well. The shipping is consolidated so you will save a ton!

Key Features of the R-3BT Rack:

  • 1Bolt-Together Design

    Rather than using fully-welded side panels, which can create some shipping and portability challenges for some gyms, the Rogue Bolt-Together R-3 gives customers an alternative option for adding a top-tier American-made power rack to their training space. The R-3BT can be shipped efficiently to an APO address, transported by component around tight corners and staircases, and set up easily using the provided instructions and hardware.

  • 2Small Footprint

    As the most compact member of the R-Series, this unit fits easily into most home gyms and garage gyms, or into a tight corner of a larger training facility. The standard construction stands 7’6” tall with an inside depth of 24” and a total footprint of just 53” x 34”. Customers can also select an alternative version with an increased depth of 30” for a small price difference.

  • 3Heavy Gauge American Steel and Hardware

    The R-3BT is built in Columbus, Ohio, using 2x3” 11-gauge steel uprights with 5/8" diameter, laser-cut holes and heavy-duty hardware. The unit is compatible with a wide assortment of Rogue Infinity Series attachments and accessories.

  • 4Compatible with Infinity Products

    Owners of the R-3 Rack can customize their system with the addition of a wide range of compatible tools and accessories. Along with adding a bar, bench, or plates to your order, you can expand the power rack itself with the inclusion of a Rogue Matador, Vertical Bar Hanger, Multi-Grip Crossmember, and more.

  • 5Package Includes Everything to Get Started

    Even without custom additions, the Bolt-Together Rogue R-3 Rack comes with all of the hardware and basic accessories necessary to have a pro-caliber power rack at your disposal. This includes all necessary 5/8” bolts and fasteners; a 43” Fat/Skinny Pull-Up Bar (with 1.25” and 2” diameter bars), (2) Infinity J-Cups, (2) Pin/Pipe Safeties, and (4) Band Pegs.

  • 6Fast Rogue Shipping

    Orders placed by 3PM ship the same day. The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Comparison

R-3
R-4
R-6
Product Weight 200 lbs 250 lbs 300 lbs
Footprint 53" x 34" 53" x 53" 53" x 80"
Pull-up Bar (1) Fat/Skinny Pull-up Bar (1) Fat/Skinny Pull-up Bar (1) Fat/Skinny Pull-up Bar & (1) X-43M Multi-Grip Bar
J-Cups Set of 2, with Protective Plastic Set of 2, with Protective Plastic Set of 2, with Protective Plastic
Band Pegs Set of 4, included Set of 4, included Set of 6, included
Pin and Pipe Safeties Set of 2, included Set of 2, included Set of 2, included
Plate Storage Optional Optional (4) Single Plate Storage & (2) Double Plate Storage

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Length 24" or 30"
Width 43"
Height 90 3/8"
Steel Notes 2 x 3" 11-Gauge Steel
Foot Print 34" or 40" x 53"
Rogue Bolt-Together R-3 is rated 5.0 out of 5 by 11.
Rated 5 out of 5 by from Perfect for the small garage My garage has an 8 foot ceiling height which made me put a lot of thought into my rack selection. If you want to be able to do pull-ups in your rack and not want to smash your head into the ceiling, I reccomend the bolt together r-3 over the regular one because it gives you the ability to adjust the pull-up bar height. I am 6'1 with longer than average length arms. With my 8 foot ceiling and my rack on top of a .75" stall mat, I have my pull-up bar bolted one hole space down from the standard height. This makes it high enough so my knees don't touch the ground, but also low enough that just my hair touches the ceiling at the absolute highest part of a chin-up. The photos attached show me hanging from the bar in case I didn't explain well. Overall, I am very happy with my purchase. In 4 months, there has not been a single issue. The safety bars are pretty clumsy to adjust so I opted to use the spotter arms instead for quick adjustments.
Date published: 2018-03-22
Rated 5 out of 5 by from 30" version review My GF and I purchased the 30" R3 BT during Black Friday 2017. The quality is great, everything fits together perfect, all pieces were included, no damage, the welds finished nicely, etc etc. Basically everything positive in other reviews holds true. I'll try and mention things I never read in other reviews, especially regarding the 30" model. We decided to buy the Bolt Together version in order to get the 30" upgrade. We ALMOST got the Monster Lite (RML-390F) version instead with the 2 long feet (also 30")...but originally planned to have this thing directly on concrete. Unfortunately our concrete is very uneven with many cracks and the 2 long feet seemed difficult to level. One with 4 separate feet and shims seemed the best option, so we started looking at the regular R3. Since my GF and I sometimes lift at the same time, we wanted to be able to have a set up where we could both be using loaded/racked barbells. We considered getting the regular welded R3 and putting it in the middle of the garage and using both sides...but that cut off pullup height due to beams and a garage door motor. It also cut off our Olympic Lifting space. So....we spent a few days doing complex math...and figured out there was probably enough room for two people to lift at once on this 30" version while against a wall, and bought it. Once received, we put it together no problem. Easier with two, but one could do it. It lifts and moves around fairly easy with only two people. It's very easy to set upright, then back horizontal again if needed. We tested the two squatting at a time theory and IT WORKS! She can squat inside the rack with a loaded bar, and I can have mine set up on the opposite side, outside the uprights. If we roll my bar to the outer edge of the J-Cups, it's plenty of room if she's careful and takes a small step. It's 18" between plates. See attached pic. All in all, I am very happy with this rack. I lag bolted it to my platform. We made the platform because the floor was so cracked and uneven. I cut and laid multiple layers of roofing felt (tar paper) to even it out best I could, then built the platform on top. The platform is 2 layers of 5/8" OSB, and one layer of 3/4" AC plywood/stall mats...for 2" total thickness. It's 8'x10' rectangle. I used twelve 2.5" x 1/2" lag bolts. The feet of this rack are 3/8" thick, and I used 2x 1/8" thick washers per bolt, so the 2.5" lag bolts go almost all the way through the 2" platform. I followed advice on another R3 review and assembled the rack, leaving all bolts loose, bolted down the feet first, then tightened up all cross members last. I would recommend doing the opposite...tightening all cross members down before bolting to ground. My platform has about a 1/16" convex bow in it, in the middle of the rack, and moves when stepped on. I theorize that when bolting the cross members together after the feet were fastened down, it pulled the feet together slightly, creating an uplift or warping of the platform? Seems, crazy, but possible. Also, the uprights measure slightly different distances from each other, depending where you measure (up high or down low). I think I could have avoided these issues if I bolted the entire rack together nice and tight before bolting to ground/platform. Regardless, 12 lag bolts into a 2" platform has this thing feeling solid. No worries there in my opinion, and I aggressively slam my bars into the J cups. With a flat floor, I'd consider getting the RML-390F instead, just because it's a bit more modular, easier to deal with, and about the same price. If you want 4 feet and 30", the R3 BT is the one. All in all, a badass rack, worth the upgrade to the 30" especially if sharing with a homie.
Date published: 2018-01-25
Rated 5 out of 5 by from Solid I received the rack pretty quickly considering the season, ~2.5 weeks. The set up was easy and this rack feels really solid. I bought this because I change cities a lot and was hoping that the tear down and set up would be relatively painless. So far, so good.
Date published: 2017-12-30
Rated 5 out of 5 by from Perfect Rack Purchased this rack for my home gym. Couldn't have been simpler/easier to get into the basement and assemble for use the same day. Extremely solid once bolted to the floor, and plenty of room to move around in. Shipping was quick and easy and customer service is unbeatable.
Date published: 2017-09-20
Rated 5 out of 5 by from Great Product With Excellent Customer Service We just finished installing this in our garage and couldn't be happier. Not only is it easy to assemble and built really solidly, once we bolted it to our garage floor I am very confident it will last for as long as we can still use it. Best of all, Rogue's customer service was absolutely exceptional! I accidentally ordered an extra set of safety pins, and they quickly responded with a question to see if I needed that or I wanted a refund. They refunded my order immediately and I couldn't believe how awesome their customer service was. That gives me even more confidence in the product!
Date published: 2017-03-21
Rated 5 out of 5 by from Fantastic Rack I can't say enough good things about this rack. It's built like a tank. I'm so glad I bought this over the welded version of the R-3 because of the 6 extra inches of interior depth and for the ability to physically add to the rack's footprint later down the road. I bolted this boy down to 3 total layers of 3/4" material with 3/8 2.5" lag screws. It has virtually no sway in any direction. My suggestion is to put the rack together without tightening down all the bolts, then mount it to your surface fully tightened through the feet, then load a weighted barbell into the rack and tighten down all the remaining bolts on the rack. Keep in mind you will need a 15/16" socket to bolt the 3/8" screws. I love the westside hole spacing. I'm a shorter guy who is seemingly always in between the holes on uprights when setting up in an optimal bench position. The pin and pipe system is what it is. It's not ideal, and it can be annoying lining it up without numbers, but it gets the job done. I'll be upgrading soon to some custom swing-in safeties or some other solution like the straps or even spotter arms. You will no be disappointed in this rack. 30" interior depth is PLENTY of room to do everything you need to. Have fun!
Date published: 2017-01-12
Rated 5 out of 5 by from Perfect I placed my order about 10 days ago. It got held up at the UPS facility for a few days but was delivered first thing this morning. I had already assembled the platform so I was ready to get this rack put together. Assembly and bolting it down took just over an hour. Incredibly simple. It's solid and doesn't rock at all. I'm 6'3" and 230 pounds and there's no sway when I tested out the pull-up bar. Everything arrived in excellent condition. All I really need now is a weight tree to get the weights off the platform. To top it all off, this thing just looks sexy. Throw in the excellent customer service from Rogue and I have zero complaints. I will be back when I add additional equipment in the future.
Date published: 2016-04-04
Rated 5 out of 5 by from Awesome Rack, Superb Customer Service.. I purchased the 30" deep model of this rack a little more than a year ago. It has functioned flawlessly and is extremely stable. I have only had 450 pounds racked in the squat position, but I wouldn't feel uncomfortable to rack about 700 in it. About 2 weeks ago, I noticed the powder coating was coming off of one of the uprights. After a phone call to Rogue, I took a couple pictures and emailed them. About 5 days later I had a brand new upright. I took the old one off and installed the new one in less than 30 mini tea, boxed the old one up in the box the new one came in and emailed rogue that it was ready to go back. They set up UPS to pick it up within 24 hours and it costed me nothing. Very well worth the investment and I would not hesitate to make the purchase again.
Date published: 2016-03-15
  • y_2018, m_5, d_19, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_XX3803, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue