Rogue Combo Rack

★★★★★
★★★★★
4.3
22 Reviews
Made in U.S.A.

Rogue Combo Rack

★★★★★
★★★★★
4.3
22 Reviews
Made in U.S.A.
$2,950.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight505LB
Length77.25" (with bench)
Width80.25" (total width) / 43.5" (inside width)
Height78" (highest point with uprights fully extended) / 17.5" (Bench Height)
Foot Print77.25" x 80.25"
Steel Notes3x3" 7-Gauge Steel
Product Description

In developing the Rogue Combo Rack, we worked directly with the International Powerlifting Federation to produce a 2-in-1 bench/squat rack that’s not only IPF certified for competition use, but also uniquely engineered for easier custom adjustments and greater overall stability.

Read More

ROGUE COMBO RACK
BLACK

In developing the Rogue Combo Rack, we worked directly with the International Powerlifting Federation to produce a 2-in-1 bench/squat rack that’s not only IPF certified for competition use, but also uniquely engineered for easier custom adjustments and greater overall stability.

Manufactured with pride in the USA, the Combo Rack features a sturdy wide-angle base, two fully adjustable 3x3” 7-gauge steel uprights, a set of drop-in Safety Spotter Arms, and a removable Rogue Bench equipped with a competition Fat Pad and diamond-tread spotter decks. All of these components come with tightening knobs for a lock-in set-up and extra peace of mind.

When you want to switch between athletes of different sizes, the height of the J-cups can be quickly adjusted using our unique jack system—with no need to waste time removing plates from your barbell. Simply use the lever arms to raise or lower the position, referring to the laser-cut numbers in the uprights for guidance. Both the jack handles and the telescoping tubes of the uprights are made from stainless steel, as are the (4) machined pins used to set the upright height. Storage for these pins is integrated into the jacks themselves.

As another unique feature, the Combo Rack’s uprights can be positioned straight or angled inward 5 degrees, allowing larger athletes to put their hands on the outside of the J-cups while squatting.

Gear Specs

SPECIFICATIONS

  • Made in the USA
  • Squat/Bench Combination Rack
  • IPF Competition Certified
  • Footprint (w/ bench):  
  • Inside Width: 43.5”
  • Total Weight (including bench):  
  • 3x3” 7-gauge steel construction
  • Jack - Lever Arms for height adjustment
  • (2) Adjustable Uprights with laser-cut numbering & MG Black powdercoat finish
  • (4) Machined Pins
  • (4) J-Cups
  • (2) Steel Safety Spotter Arms - 19.5" x 3"
  • (1) Bench w/ Fat Pad and Spotter Decks
  • Rubber Feet and UHMW Plastic to protect equipment and surfaces
Shipping

ROGUE FAST SHIPPING

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your day.  Order today, track today.

Key Features of the Rogue Combo Rack

Precision Height Adjustments
1

Precision Height Adjustments

The Combo Rack comes equipped with a lever-arm jack system and telescoping uprights to enable custom height adjustments without having to remove plates from the bar in advance. Because there are two separate pairs of J-cups (one set for Squat and one for Bench), the racked bar height is adjustable from a minimum height of 29.461" (from the floor) up to 68.405". Shorter athletes can also elect to use the higher bench J-cup positions for squats.

Bench J-Cup Range (from floor): 29.461" up to 57.461"

Squat J-Cup Range (from floor): 40.405" up to 68.405"

Each J-cup also includes an acetal roller where the bars rests to allow for easy adjustments left to right while the user is getting set up.

Versatile Uprights
2

Versatile Uprights

The uprights on the Rogue Combo Rack are manufactured from 3x3" 7-Gauge Steel with laser-cut numbering and an MG Black powdercoat finish. The telescoping tubes are made from stainless steel. A set of (4) stainless steel machined pins are used to set the uprights’ height, which can be adjusted using the 1" on-center holes. Athletes can set-up the uprights either straight-up or angled inward 5 degrees; the latter set-up enables larger athletes to put their hands on the outside of the J-cups when squatting.

Removable Bench
3

Removable Bench

The Combo Rack’s bench comes standard with a competition Fat Pad (50" L x 12.5" wide x 4.5" thick). The top of this durable pad sits 17.5” above the floor. The bench also includes two diamond tread spotter decks that are finished in a texture black powder coat to provide “grip” and a stable platform. Athletes can easily remove the bench to set up the rack for squats.

Removable Spotter Arms
4

Removable Spotter Arms

The steel spotter arms on the unit measure 19.5” in length x 3” wide, and include stainless steel telescoping tubes + a UHMW plastic covering to protect the bar should a lift be failed. The spotters are also easy to remove when you switch over to squats.

Quality Rogue Manufacturing - IPF Certified
5

Quality Rogue Manufacturing - IPF Certified

The Combo Rack is made in the USA and built to International Powerlifting Federation requirements for competition use. The inside width of the rack is 43.5", and the overall footprint (with the bench installed) is a space efficient 77.25" deep x 80.25" wide. The unit is also equipped with important protection/safety features, including rubberized feet for stability and UHMW plastic to help prevent contact damage to your equipment or flooring. All components of the rack (uprights, bench, spotter arms) include special tightening knobs to further improve the stability and rigidity of the rack.

Recommended Products

Reviews

1 - 8 of 22 Reviews
Richard Sacks
NY,NY
★★★★★
★★★★★
January 16
Better Squat Safety
Great Combo Rack. But needs better squat safety. I understand its meant for powerlifting meets but IMO most people using this train alone. Huge safety risks. I would argue if rogue can create some type of safeties for squatting this would be perfect for meets and those training alone. Personally, meets should have more than one safety mechanism for squatting not just spotters. There should be some mechanical like safety(ex:safetyy arm or straps) that supplement and support the spotters. Simply having spotters potentially turn a minor injury to a catastrophic injury. And risks are exponential for those training alone. Rogue make it happen!
Yes, I recommend this product
Helpful?
Yes · 2
No · 3
Volfan537240
Alabama
★★★★★
★★★★★
Dec 2023
Add the Manta Ray Bench for an incline bench
I purchased this combo rack for the sole purpose of building an incline bench from Rogue to match the flat bench that sits beside it. There was some modifications (drilling out bolt holes on the Manta Ray and we cut the front J-cups off) but overall, it's a nice piece.
Yes, I recommend this product
Helpful?
Yes · 4
No · 4
Randal 143
★★★★★
★★★★★
Nov 2023
Great but lacking
I bought this combo rack 2 years ago and its been great. However, the main concern with combo rack is squat safety. The safeties (faceguard) just dont cut on squats. I cant blame this completely on rogue as this is the better of the combo racks out there. But if rogue can produce some type of extra safety measure(i.e attachments straps / safety box etc) for squatting off this rack that would be great. You cant really expect to squat big weights if safety is not in place.
Yes, I recommend this product
Helpful?
Yes · 0
No · 6
Chobani
Minneapolis
★★★★★
★★★★★
Nov 2023
I don't think the designers ever used it
At first glance this rack looks great. Priced competitively and looks "beefy." But when you spend time using this rack day after day, you start noticing its big flaws. Most combo racks have 2x2 uprights but this one is closer to 3x3, this makes the rack wider and much easier to hit the uprights when unracking a squat. Many of my friends end up having to move the uprights in when squatting, which is a pain. Now onto the bench, this bench pad is fine. The pad is wider than most combo racks so you might get thrown off meat day if you are competing on a different rack but it's grippy and comfortable. The problem I have with this as a bench is related to the uprights again. The pins that hold the rack at your selected height stick out and are easy to catch on the lip of a plate when unracking which can really throw you off if you are going heavy. I have been spotting someone and had them catch the pin countless times. The adjuster arms are also annoying because of how thick the pin is. I get that they want a "beefy" looking pin but it's unnecessary and means you often have to use the lever twice when many other racks would only need to use the lever once. The bench itself is heavy and annoying to get out of the rack. I often see smaller lifters needing two people to get the bench out when they need to squat. I think Rogue needs to go back to the drawing board on this one. The UHMW plastic covered components are great, but that is about the only thing I think this rack does better than most other combo racks. The flaws of this rack make it one of the worst combos on the market in my opinion. I expect better from a brand like rogue. Their power bars are some of the best in the world, their calibrated plates are great, thier power racks are fantastic. This combo was a huge disapointment.
Helpful?
Yes · 12
No · 1

Response from Rogue Fitness:

Nov 2023
We are always listening and appreciate you taking the time to leave us your honest feedback. We will take this back to the team.
Drew H
Grand Rapids, MI
★★★★★
★★★★★
May 2023
Monster of a Rack
First and foremost let me say this thing is a PLEASURE to lift on. The bench pad is extremely grippy and a great ratio of comfortability to stability. The rollers on the j cups are buttery smooth and make adjusting the bar to the center easy even with several hundred pounds on the bar. I can also drive the bar into my back when unracking a squat and not tip the platform forward. I personally use a lot of forward drive to set my back position. This thing is STURDY and can handle it. Best combo rack I’ve used by a long shot. The downsides are as follows. 1. iffy instructions. (Didn’t realize the shafts on the part list were already in the upright. We thought it was missing from the parts bag) 2. The bolts on the bottom are a ridiculous size any normal person likely won’t have the tools for. (Our largest was supposedly a 1” and that wasn’t CLOSE to being big enough.) 3. The bench can be tough to get out alone. I deadlift over 700lbs and it was a tad annoying for me even to remove it or place back in. That’s the price you pay for such a sturdy price of equipment though. Personally that’s a trade off I’m fine with but it’s worth a mention.
Yes, I recommend this product
Helpful?
Yes · 5
No · 1
Jonathan Vet
New York, Ny
★★★★★
★★★★★
May 2023
Quality I don’t deserve
This thing is so overbuilt it’s incredible. I feel like the quality is better than most gyms actually have…I’m leaving one star off because I’d like to see some attachment/accessory availability for this unit. I know it’s intended for competition settings but it would be nice to be able to build off it and attach supplementary equipment to the rack.
Yes, I recommend this product
Helpful?
Yes · 1
No · 5
Appelserv
Wilmington NC
★★★★★
★★★★★
Mar 2022
WOW!
This is a great piece of equipment! Ordered and delivered within one week.. Packaged nicely and arrived with no shipping blemishes.. Thank you Rogue!
Yes, I recommend this product
Helpful?
Yes · 3
No · 2
GYMasd
HU
★★★★★
★★★★★
Feb 2022
Not available
It would be nice, if it would be possible to buy it…… I m waiting for this to be available for months now.
Yes, I recommend this product
Originally posted on rogueeurope.eu
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery