Gift CardsContact UsOrder Status
Live Chat

Rogue Vertical Plate Tree 2.0

★★★★★
★★★★★
4.7
302 Reviews
Made in U.S.A.

Rogue Vertical Plate Tree 2.0

★★★★★
★★★★★
4.7
302 Reviews
Made in U.S.A.
Rogue Vertical Plate Tree 2.0
$240.00
Extra Set of Wheels
$40.00
Includes 4 wheels & hardware

Gear Specs

BrandRogue Fitness
Made In USAYes
Length26" , 12" post length
Width24"
Height50"
Product Description

The simple, old-school plate tree is still the gold standard when it comes to efficient bumper storage at affiliates and garage gyms around the globe. That said, there’s always room for a little refinement. Rogue’s updated Vertical Plate Tree—built in the USA—improves on traditional models with a reinforced triangle-plate base, optional wheels for mobility, and re-positioned posts that enable full-size Oly plate storage on all three tiers. The unit’s new bolt-together design also reduces shipping costs while maximizing overall stability.

Read More

Vertical Plate Tree 2.0

The simple, old-school plate tree is still the gold standard when it comes to efficient bumper storage at affiliates and garage gyms around the globe. That said, there’s always room for a little refinement. Rogue’s updated Vertical Plate Tree—built in the USA—improves on traditional models with a reinforced triangle-plate base, optional wheels for mobility, and re-positioned posts that enable full-size Oly plate storage on all three tiers. The unit’s new bolt-together design also reduces shipping costs while maximizing overall stability.

Compatible with any and all IWF standard Olympic plates, the Vertical Plate Tree 2.0 is equipped with six 12” long storage posts (three on each side) constructed from 1.5” Schedule 40 pipe. Each of the posts on the roughly four-foot tall tree are evenly spaced at 18.275" on center to offer a good mix of versatility and storage capacity.

*Please note that any metal-to-metal contact with the coated storage posts (such as adding and/or removing plates) may cause wear on the finish over time.*

See More: Plate Storage Units Available from Rogue

Gear Specs

SPECIFICATIONS

  • Made in the USA 
  • 26" , 12" post length L x 24" W x 50" H
  • New, Bolt-Together Base Design w/ Triangle Plates
  • (6) 12” Plate Storage Posts – Schedule 40 construction
  • All 3 Tiers compatible with Full-Size 450mm / 1.9" OD Olympic Plates
  • Weight post spacing: 18.275" on center
  • Optional Set of (4) Wheels Available (Imported)
Shipping

ROGUE FAST SHIPPING

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your day.  Order today, track today.

Recommended Products

Reviews

1 - 8 of 302 Reviews
strongdad707
Temple, Texas
★★★★★
★★★★★
1 week ago
Comically Large Weight Tree
When I first found this weight tree on Rogue's website, my first question was why it was being sold for $240. I originally had all 10 of my 45lb plates stacked on top of a wooden fence board to keep them off the foundation, and the other 25s, 10s, 5s and 2.5s stacked neatly on a nearby shelf. Weight storage was a necessary expense and while I'm used to the old A-frame style weight tree, I decided I liked the look of this style and so I purchased one during my latest round of buying new equipment for my home gym. When it arrived, Rogue had shipped it in two boxes. One box held the upright and the bolts/nuts/washers, and the other held the stand. I soon learned why it was $240. The boxes were rather heavy, I'd estimate about 30 to 50lbs each, and long. When removing the weight tree from it's cardboard confines, I discovered it's also quite large. When fully assembled, this thing stands 50 inches tall, which is 4 feet and 2 inches. It also occupies a horizontal area of 4sqft and takes up a total of 16 cubic feet thanks to the fact that each spoke is about 12 inches long. It's stupidly large compared to the old school weight trees, and so I've affectionately named it my "comically large weight tree." I, like many home gym owners, don't have much space and so maximizing the limited amount of space is important, making this weight tree detrimental to that goal. The Rogue build instructions also show placing the bolts facing outwards so the nuts are on the outside. This takes another inch or so, so I would flip them around to save that space. Despite this gripe, this thing is very stout and is currently carrying quite a bit without an issue. My recommendation for this would depend on if you have a lot of space or not. For someone with a smaller space, I'd say skip this and look at power rack based weight storage instead. Mine is against a wall with the weight spokes parallel to said wall, so it prevents me from using that wall to hang things as well.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Coach Josh
MN
★★★★★
★★★★★
March 11
Built for Commercial Gyms - Not Garages
Positives about this Tree. Well built. Good welds. Can hold a TON of weight. Powder coated. Its even portable BUT in a garage, there are some issues. I bought the wheels for this tree and was shocked that none of the wheels had a brake on them. Even with 800# of plates, pulling a plate off causes the tree to roll towards me. So, I had to tighted the wheel bolts down to prevent it from rolling in my sloped garage. Definitely recommend synching the wheels like I did and/or putting it on rubber. I bought the wheels only to make the lower posts further away from the ground. Powder coated is fine, for Repurposed tire plates and HD plates - not Urethane or Competition plates. If you look at Rogues pictures, you can see "cloudiness" on the tops of the posts - the hubs quickly remove that costing (commercial plates dont). To address this, ill be stripping the paint off the posts and putting a "truck bed liner" to enhance durability and resist oxidation (Not Rogues Problem) Small thing, the Rogue sticker has a bunch of bubbles (must have had dust in the air when they put it on) no biggie, just surprising because none of my other rogue branding has a single bubble. Again, great tree. Works great! Definitely would love to have two of the 4 wheels with brakes. My review should not prevent you from getting this tree. I would buy it again!
Yes, I recommend this product
Helpful?
Yes · 3
No · 1
MM1200
★★★★★
★★★★★
March 10
Came defective run around from customer service
I bought this last week. It won’t fit together. I contacted Rogue via their site, and followed up with a phone call. The rep on the phone was nice and said a replacement and shipping label would be sent my way. Now I’m dealing with a big runaround trying to get plates off of my floor. It does appear like it will be good once I can use It.
Helpful?
Yes · 1
No · 2

Response from Rogue Fitness:

March 14
We sincerely apologize for any inconvenience this has caused. Your replacement parts have arrived and we can confirm you are up and running with your Vertical Plate Tree.
Sam Gilchrist
Calgary, AB
★★★★★
★★★★★
February 14
Unapologetically overbuilt. And multifunctional.
Positively overbuilt. This is why I love Rogue gear. While it is a weight tree, it can be multifunctional. I've loaded the Monster Lite bar holders to the frame giving me both a bar storage solution as well as plate storage. As the Monster Lite dimensions fit this, I've installed the bar holders in place of the original bolts allowing simultaneous access to plates without too much hindrance from the bars.
Yes, I recommend this product
Helpful?
Yes · 5
No · 0
Matt Rzz
Columbus, OH
★★★★★
★★★★★
February 14
10/10 Great Weight Tree
Can’t really do much better than this weight tree! I got it because my 8 inch sleeves on my previous weight tree weren’t cutting it. This thing has 6 12 inch sleeves! It looks bare even with all my weights on it. I love that I can put 45’s on any height if I wanted to. Oh and it’s on wheels!
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
nikleplated
Eagle, ID
★★★★★
★★★★★
January 27
Great storage rack, but package came damaged
Just wanted to start off by saying how great this storage rack is. Well worth the money. Would I buy again, absolutely! Not given it 5 stars because the packaged was opened on both side and the bottom of the tower was about half a foot out of the box, it actually busted out. There are a few marks on it but don’t want to go through the trouble of returning it. Obviously there isn't enough packaging in the box to keep it from moving during shipping. It’s just the tower in a box with 2 straps. This really needs to be addressed. Can’t really fault the shipping company for this one. But nevertheless, it’s a GREAT rack! Nice and strong!
Yes, I recommend this product
Helpful?
Yes · 1
No · 3

Response from Rogue Fitness:

February 1
Thank you for sharing your experience and for this feedback! We will reach out to address this with you, and we apologize it showed up this way.
Logan C
Lawrence, KS
★★★★★
★★★★★
January 25
Effective, but expensive
Does exactly what I wanted and what was advertised. More sturdy remotely necessary, rolls around nicely, and fits bumper plates. Only knock against it is that I'm pretty sure it could be less expensive, but you do pay a premium when buying rogue gear.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Anthonyt
★★★★★
★★★★★
January 17
Worth buying
Amazing product. Easy to put together and very sturdy.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery