GutscheineKontaktBestellstatus

Rogue Wrenches

★★★★★
★★★★★
3.3
11 Rezensionen
Hergestellt in den USA.

Rogue Wrenches

★★★★★
★★★★★
3.3
11 Rezensionen
Hergestellt in den USA.
Sold in Pairs
Monster 1.5" Wrench Pair
35,70 €
3 Ships Free-ARTIKEL
Rogue 15/16" Wrench Pair
41,65 €
Versand in 7-10 Werktagen

Produktdaten

MarkeRogue Fitness
Hergestellt in den USAJa
Länge12.5"
Stahlinformationen0.375" dicker, lasergeschnittener Stahl mit schwarzem Zinkfinish
Produktbeschreibung

Our line of exclusive Rogue Rig Wrenches are manufactured in-house and specifically designed for compatibility with the standard hardware used in Rogue rigs and racks. Sold in pairs and available in two sizes (1.5” for Monster units and 15/16” for Monster LITE units), these tools can help you assemble a unit quickly and securely—without having to invest in expensive wrenches and sockets at sizes that might rarely be utilized for other projects.

IMPORTANT: Rogue Wrenches are not hardened and are made from 0.375” thick laser-cut steel. They are intended only as basic, low-usage tools for assembling Rogue equipment, and should NOT be seen as an equivalent or replacement for a high-volume commercial tool set. 

Customers should further be aware that any metal-to-metal contact when using a Rogue Wrench may cause scratching of the zinc finish. Damages to the finish will not impact the functionality of the wrench.


Mehr lesen

Rogue Rig Wrenches

Our line of exclusive Rogue Rig Wrenches are manufactured in-house and specifically designed for compatibility with the standard hardware used in Rogue rigs and racks. Sold in pairs and available in two sizes (1.5” for Monster units and 15/16” for Monster LITE units), these tools can help you assemble a unit quickly and securely—without having to invest in expensive wrenches and sockets at sizes that might rarely be utilized for other projects.

IMPORTANT: Rogue Wrenches are not hardened and are made from 0.375” thick laser-cut steel. They are intended only as basic, low-usage tools for assembling Rogue equipment, and should NOT be seen as an equivalent or replacement for a high-volume commercial tool set. 

Customers should further be aware that any metal-to-metal contact when using a Rogue Wrench may cause scratching of the zinc finish. Damages to the finish will not impact the functionality of the wrench.


Produktdaten

Monster Lite 15/16" Wrenches

  • Custom spec'd for use with the 0.625" hardware of the Infinity Series and Monster Lite Series
  • Sold as Pair
  • Length:  12.5"
  • Handle: 0.75" wide, includes laser-etched Rogue logo
  • 0.375" thick laser cut steel with Black Zinc finish 
  • Plated in the same black zinc finish found on many of our barbells
  • Combination style design--one open end and one closed-end


MONSTER 1.5" WRENCHES 

  • Custom spec'd for use with the 1" hardware of the Monster Series
  • Sold as Pair
  • Length:  12.5"
  • Handle: 1" wide, includes laser-etched Rogue logo
  • 0.375" thick laser cut steel with Black Zinc finish 
  • Plated in the same black zinc finish found on many of our barbells
  • Combination style design--one open end and one closed-end
Versand

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Empfohlene Produkte

Rezensionen

Kommentar 1–8 von 11
AchlysAug
Tennessee
★★★★★
★★★★★
June 19
Unless you get these with purchase, wouldn't buy
I now have 6 of these and put them on the wall as they are a memory of my grit and pain tolerance haha. I'm a farmer and welder who uses my hands on very rough things everyday and let me tell you these are ROUGH. Between my rhino belt squat and my FM-6 twin functional trainer I have over 10 hours with these. The edges are so sharp and they come covered in grease/oil. My girlfriend simply couldn't use these due to how aggressive the edges are. They come with the purchase but otherwise I'd buy pretty much any other wrench.
Ursprüngliche Quelle des Beitrags: roguefitness.com
Josh Z
Seattle
★★★★★
★★★★★
Mar 2024
Very useful. They can install hundreds of bolts
These came with my RM-3. I extended my rack with another pair of uprights and 24" crossmembers. Around 30 bolts later, these barely look used. I don't understand how you could bend these during normal use. The circular end is necessary to get under bottom uprights and into tight corners.
Ja, ich empfehle dieses Produkt weiter
Ursprüngliche Quelle des Beitrags: roguefitness.com
Wedos
★★★★★
★★★★★
Aug 2023
Bent After First Use
Either this wrench arrived bent and I didn't notice, or it bent when I set up my rack that I bought at the same time. It's open just enough to slip off every time. I have to use the closed end on this wrench.
Ursprüngliche Quelle des Beitrags: roguefitness.com

Antwort von Rogue Fitness:

Aug 2023
We're sorry to see this and have sent out a replacement.
Spring collars rock
Lorain, Ohio
★★★★★
★★★★★
Mar 2023
Rogue Monster lite wrench
Nothing special it's a wreck and dose the job. You get 2 of them just wish they engraved the size on them. I wrote mine with a silver Sharpie lol.
Ja, ich empfehle dieses Produkt weiter
Ursprüngliche Quelle des Beitrags: roguefitness.com
Ljw2000
San Francisco
★★★★★
★★★★★
Oct 2022
Blue collar wrenches
These wrenches do the job. There is nothing special about them, the finish is a bit rough around the edges but they are only likely to be used a few times.
Ja, ich empfehle dieses Produkt weiter
Ursprüngliche Quelle des Beitrags: roguefitness.com
rockies
Oregon, USA
★★★★★
★★★★★
Feb 2022
Only 1/2 way there, Rogue
Started using these with the "box" end, and they worked well. Nice length, lots of torque. Soon, presumably after a bit of wear, they consistently slipped off of the nuts. Not good, obviously. I switched to the "socket" end of the wrenches, and they worked perfectly for the rest of my assembly work. The etched Rogue logo is barely visible. Why bother? I love the rest of my Rogue gear, without exception. Quite disappointed in this substandard effort by Rogue. I suppose I'd grudgingly recommend these, but I'd look for a socket and wrench elsewhere if I had a redo.
Ursprüngliche Quelle des Beitrags: roguefitness.com
Eric94
Indiana
★★★★★
★★★★★
Dec 2021
It works, but they are sharp and uncomfortable.
It works. I'd recommend either gloves or take an angle grinder to it before using them. The edges are sharp and has metal burrs on them. It's hard to believe that Rogue would let a product like this be sold. They feel unfinished and hastily made.
Ursprüngliche Quelle des Beitrags: roguefitness.com
DamonB82
Gilbert AZ
★★★★★
★★★★★
Jun 2021
Ok, nothing special
Two adjustable wrenches will work just the same. And the “ROGUE” etched in mine is barely visible, looks like chicken scratch
Ursprüngliche Quelle des Beitrags: roguefitness.com
#RYOUROGUEMarkiere deine Fotos auf Instagram und Twitter mit #RYOUROGUE, damit sie in unserer Galerie gezeigt werden könnenVollständige Galerie anzeigen