Online orders and operations are active. Retail store is closed. | Covid-19 Status
Daily Shipping Deals





Rogue Fold Back Rack Stringer Pair


Rogue Fold Back Rack Stringers

Exclusively for use with Rogue’s Fold Back Wall-Mounted Power Racks, these exclusive stringer pairs are highly recommended for ensuring the most stable, secure installation possible. Each stringer is made in the USA from laser-cut and formed 11-gauge laser cut and formed steel brackets, and measures 59" long x 10.125" tall, with a protrusion of 0.8125" (depth) off the mounting surface when installed. Within the pair, one stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets.

The Fold Back Rack Stringers are designed with special pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). All necessary hardware (16.375" x 2.5" black wood lags and washers) is included with the stringers, but any customers attempting to mount to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

These stringers are intended for use with:

The hinge mounting holes on the face of the stringer are designed to be compatible with both the Infinity and Monster Lite Fold Back Racks.

Additional Specifications:

  • Sold as Pair
  • Patent Pending Design
  • Construction: 11-gauge laser cut and formed steel brackets
  • Dimensions: 59" long x 10.125" tall, extends 0.8125" (depth) from mounting surface
  • Finish: Black Texture Powder Coat

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Length 59"
Width 0.8125" (depth)
Height 10.125"
Other Product Specs Sold as a Pair, Mounting Hardware Included
Steel Notes 11-gauge laser cut and formed steel brackets
Infinity Compatible Yes
Monster Lite Compatible Yes
Rogue Fold Back Rack Stringer Pair is rated 4.8 out of 5 by 24.
Rated 5 out of 5 by from Great quality Makes installation a lot easier. Granted, the letters were printed backwards on one of the stringers, but Rogue gave me a refund once I contacted them. A heavy and quality product.
Date published: 2020-06-29
Rated 4 out of 5 by from Install Tips Let me makes this easy for you guys. This wasn’t easy. AT ALL. But if you have a car floor jack you can precisely jack up one side under the mounts while you easy hand the weight on the other side. Problem is you can’t do that for the top. However get a long level and just mark and level the top stringer to match the bottom stringer
Date published: 2020-06-14
Rated 4 out of 5 by from Awesome addition to my home gym Previously I had attached the squat rack directly to the wall which never felt too safe, with this addition It is now perfectly sturdy and also really easy to install.
Date published: 2020-06-02
Rated 5 out of 5 by from Save the hassle The pre drilled holes and hardware made this for me. I’ve used my own slingers before and just not having to do that part made this a worthwhile purchase for me. Solid construction as always. However, in case people don’t know, there should be a disclaimer about garage installation. Garage floors slope so you must adjust accordingly. It would be unpleasant to think you have finished, only to try to fold your rack and not be able to.
Date published: 2020-04-08
Rated 5 out of 5 by from Easy to Install Very easy to install, directions were great. The stringers make the rig feel very solid. I wouldn't install the folding rack any other way.
Date published: 2020-03-25
Rated 5 out of 5 by from Great product I just set it up in my garage and it looks great and makes setting up the rack easy.
Date published: 2020-01-20
Rated 5 out of 5 by from Worked exactly how it should Bought for a monster rack I purchased and it made the installation quite easy. Not a twenty minute job as shown in the video. Especially when you are installing it solo...
Date published: 2020-01-06
Rated 5 out of 5 by from Great Product, Easy to Install We bought these for a re-install of our rack after moving to a new house. They are super easy to install as long as you have two people to do the job and they look MUCH better than the wood stringers that we used in the original installation. The instructions that come in the package are crystal clear, so all you really need to do is make sure that your measurements are accurate, mark and drill the required holes, then have another person hold the stringer in place while you drive the lag screws. One thing to note - the product description doesn't specifically state that it includes the hardware required to mount the rig brackets to the stringers, but it does, so you'll have everything you need to get the job done.
Date published: 2019-10-15
  • y_2020, m_7, d_11, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_en_US, sid_RA1446, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue