Daily Shipping Deals





Rogue Bolt-Together R-3

Bolt-Together R-3
R-3 Concrete Anchor Kit
(8) Concrete Anchors.
Infinity Strap Safety System 2.0 - 24"
Infinity Strap Safety System 2.0 - 30"

Gear Specs

Brand Rogue Fitness
Color Black
Length 24" or 30"
Width 43"
Height 90 3/8"
Steel Notes 2 x 3" 11-Gauge Steel
Foot Print 34" or 40" x 53"
Made In USA Yes

Rogue Bolt-Together R-3 Power Rack

Bolt-Together Version of the Classic Westside Barbell Rack

The Bolt-Together Rogue R-3 Rack features the same 2x3” 11-gauge steel uprights (90” tall), 5/8” hardware, and Westside hole spacing as the standard R-3, but with a set-up optimized for shipping to an APO address and/or more easily maneuvering into a training space with a tight staircase or low ceiling.

As part of the Rogue Infinity R-Series, the R-3BT offers superior durability and versatility in a compact frame: 24” inside depth, 53” x 34” footprint. This makes the unit equally well suited to large-scale pro and college facilities as well as small garage gyms. A 43” Fat/Skinny Pull-Up Bar, along with sets of Infinity J-Cups, Pin/Pipe Safeties, and Band Pegs, are included with the package. You can make multiple custom additions to your order using the choices from the drop down menu on this page.

Important: This rack must be bolted to the floor before use.

Variations on the R-3 Power Rack include:
Standard R-3 Power Rack
The R-3W Fold Back Wall-Mount Rack

See Also: The Complete Rogue Infinity R-Series

Additional Specifications:

  • Made in the USA
  • 2x3" 11-gauge Steel
  • 5/8” Bolts and Fasteners
  • Westside Hole Pattern – 1” through bench and clean pull zone then 2” spacing above and below
  • Inside Rack Depth: Choice of 24” or 30”
  • (1) Fat/Skinny Pullup Bar - 1.25” and 2” Pull-up bar at 7’ 6” Height
  • (2) Infinity J-Cups, (2) Pin/Pipe Safeties, (4) Band Pegs
  • Black Powder Coat Finish
  • Unit must be bolted to the floor
  • You can add bars, plates and bench by selecting them on the drop down, as well. The shipping is consolidated so you will save a ton!

Key Features of the R-3BT Rack:

  • 1Bolt-Together Design

    Rather than using fully-welded side panels, which can create some shipping and portability challenges for some gyms, the Rogue Bolt-Together R-3 gives customers an alternative option for adding a top-tier American-made power rack to their training space. The R-3BT can be shipped efficiently to an APO address, transported by component around tight corners and staircases, and set up easily using the provided instructions and hardware.

  • 2Small Footprint

    As the most compact member of the R-Series, this unit fits easily into most home gyms and garage gyms, or into a tight corner of a larger training facility. The standard construction stands 7’6” tall with an inside depth of 24” and a total footprint of just 53” x 34”. Customers can also select an alternative version with an increased depth of 30” for a small price difference.

  • 3Heavy Gauge American Steel and Hardware

    The R-3BT is built in Columbus, Ohio, using 2x3” 11-gauge steel uprights with 5/8" diameter, laser-cut holes and heavy-duty hardware. The unit is compatible with a wide assortment of Rogue Infinity Series attachments and accessories.

  • 4Compatible with Infinity Products

    Owners of the R-3 Rack can customize their system with the addition of a wide range of compatible tools and accessories. Along with adding a bar, bench, or plates to your order, you can expand the power rack itself with the inclusion of a Rogue Matador, Vertical Bar Hanger, Multi-Grip Crossmember, and more.

  • 5Package Includes Everything to Get Started

    Even without custom additions, the Bolt-Together Rogue R-3 Rack comes with all of the hardware and basic accessories necessary to have a pro-caliber power rack at your disposal. This includes all necessary 5/8” bolts and fasteners; a 43” Fat/Skinny Pull-Up Bar (with 1.25” and 2” diameter bars), (2) Infinity J-Cups, (2) Pin/Pipe Safeties, and (4) Band Pegs.

  • 6Fast Rogue Shipping

    Orders placed by 3PM ship the same day. The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.


Product Weight 200 lbs 250 lbs 300 lbs
Footprint 53" x 34" 53" x 53" 53" x 80"
Pull-up Bar (1) Fat/Skinny Pull-up Bar (1) Fat/Skinny Pull-up Bar (1) Fat/Skinny Pull-up Bar & (1) X-43M Multi-Grip Bar
J-Cups Set of 2, with Protective Plastic Set of 2, with Protective Plastic Set of 2, with Protective Plastic
Band Pegs Set of 4, included Set of 4, included Set of 6, included
Pin and Pipe Safeties Set of 2, included Set of 2, included Set of 2, included
Plate Storage Optional Optional (4) Single Plate Storage & (2) Double Plate Storage

Gear Specs

Brand Rogue Fitness
Color Black
Length 24" or 30"
Width 43"
Height 90 3/8"
Steel Notes 2 x 3" 11-Gauge Steel
Foot Print 34" or 40" x 53"
Made In USA Yes
Rogue Bolt-Together R-3 is rated 5.0 out of 5 by 9.
Rated 5 out of 5 by from Solid I received the rack pretty quickly considering the season, ~2.5 weeks. The set up was easy and this rack feels really solid. I bought this because I change cities a lot and was hoping that the tear down and set up would be relatively painless. So far, so good.
Date published: 2017-12-30
Rated 5 out of 5 by from Perfect Rack Purchased this rack for my home gym. Couldn't have been simpler/easier to get into the basement and assemble for use the same day. Extremely solid once bolted to the floor, and plenty of room to move around in. Shipping was quick and easy and customer service is unbeatable.
Date published: 2017-09-20
Rated 5 out of 5 by from Great Product With Excellent Customer Service We just finished installing this in our garage and couldn't be happier. Not only is it easy to assemble and built really solidly, once we bolted it to our garage floor I am very confident it will last for as long as we can still use it. Best of all, Rogue's customer service was absolutely exceptional! I accidentally ordered an extra set of safety pins, and they quickly responded with a question to see if I needed that or I wanted a refund. They refunded my order immediately and I couldn't believe how awesome their customer service was. That gives me even more confidence in the product!
Date published: 2017-03-21
Rated 5 out of 5 by from Fantastic Rack I can't say enough good things about this rack. It's built like a tank. I'm so glad I bought this over the welded version of the R-3 because of the 6 extra inches of interior depth and for the ability to physically add to the rack's footprint later down the road. I bolted this boy down to 3 total layers of 3/4" material with 3/8 2.5" lag screws. It has virtually no sway in any direction. My suggestion is to put the rack together without tightening down all the bolts, then mount it to your surface fully tightened through the feet, then load a weighted barbell into the rack and tighten down all the remaining bolts on the rack. Keep in mind you will need a 15/16" socket to bolt the 3/8" screws. I love the westside hole spacing. I'm a shorter guy who is seemingly always in between the holes on uprights when setting up in an optimal bench position. The pin and pipe system is what it is. It's not ideal, and it can be annoying lining it up without numbers, but it gets the job done. I'll be upgrading soon to some custom swing-in safeties or some other solution like the straps or even spotter arms. You will no be disappointed in this rack. 30" interior depth is PLENTY of room to do everything you need to. Have fun!
Date published: 2017-01-12
Rated 5 out of 5 by from Perfect I placed my order about 10 days ago. It got held up at the UPS facility for a few days but was delivered first thing this morning. I had already assembled the platform so I was ready to get this rack put together. Assembly and bolting it down took just over an hour. Incredibly simple. It's solid and doesn't rock at all. I'm 6'3" and 230 pounds and there's no sway when I tested out the pull-up bar. Everything arrived in excellent condition. All I really need now is a weight tree to get the weights off the platform. To top it all off, this thing just looks sexy. Throw in the excellent customer service from Rogue and I have zero complaints. I will be back when I add additional equipment in the future.
Date published: 2016-04-04
Rated 5 out of 5 by from Awesome Rack, Superb Customer Service.. I purchased the 30" deep model of this rack a little more than a year ago. It has functioned flawlessly and is extremely stable. I have only had 450 pounds racked in the squat position, but I wouldn't feel uncomfortable to rack about 700 in it. About 2 weeks ago, I noticed the powder coating was coming off of one of the uprights. After a phone call to Rogue, I took a couple pictures and emailed them. About 5 days later I had a brand new upright. I took the old one off and installed the new one in less than 30 mini tea, boxed the old one up in the box the new one came in and emailed rogue that it was ready to go back. They set up UPS to pick it up within 24 hours and it costed me nothing. Very well worth the investment and I would not hesitate to make the purchase again.
Date published: 2016-03-15
Rated 5 out of 5 by from Great rack The first thing I noticed when I unboxed this rack was that it was heavier than I expected--a good thing for a rack. Assembly was straight forward and I completed it in less than 2 hours with only a couple wrenches. I did add the multigrip crossmember and moved the included pullup bar to the back to act as a stabilizer. It really does need to be bolted down, even with the additional crossmember. I built a plywood platform and bolted it to that and it's very solid. At 235lbs I can do pullups and it barely moves. You really can't overemphasize the importance of the hole spacing, especially in the bench area. In other racks it's always a pain to get it adjusted just right and it seems I'm always hitting the safety bar or it's too low to act as a real safety. Having used this rack with the close spacing i will never buy another rack without it. Of course, I doubt I'll ever need another rack with this thing. One minor complaint. The bases of the vertical supports (the ones you bolt down to the floor) are not all the same. The measurements are slightly different so it's important to match them up when assembling. The instructions make no mention of this (maybe it's a production error?) and the differences were small enough I didn't notice. After I bolted it down, though, I realized the bases were not in line exactly. I went back and measured and saw the differences. It's a purely cosmetic issue and doesn't impact the rack in any way, but being OCD a bit seeing the mismatch bothers me. Maybe one day I'll take it apart and reorient the bases so they all match. Or maybe not. Either way, overall an excellent rack I would buy again.
Date published: 2014-01-15
Rated 5 out of 5 by from Everything Expected This thing is so over built it is incredible. My Wife and I are familiar with these from our box so when I sold our old squat rack and was looking at a rouge s-2 she said just get the one you really want. I got R-3 the bolt together because I have low ceilings in my garage and wanted to lower the pull-up bar a couple of holes. I was not disappointed. Easy assembly. Everything fit perfect. Great quality control there at Rouge. I surprised my wife with a Bella Bar. I have never seen her so excited about getting new equipment. She felt very comfortable with it "because it was just like at the gym." Don't forget to add anchors to your order.
Date published: 2013-02-13
  • y_2018, m_1, d_19, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_XX3803, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue