Daily Shipping Deals






Rogue HG 2.0 Bumper Plates

160LB HG 2.0 Set
(2) Each of 10-25-45LB bumpers
3 Ships Free
230LB HG 2.0 Set
(2) Each of 10-25-35-45LB Bumpers
3 Ships Free
260LB HG 2.0 Set
(2) Each of 10-15-25-35-45LB Bumpers
3 Ships Free
350LB HG 2.0 Set
(2) Each of 10-15-25-35 & (4) 45LB Bumpers
3 Ships Free
500LB HG 2.0 Set
Choose your breakdown that is equal to or less than 500lbs You may note your breakdown in the comments box during checkout
3 Ships Free
1000LB HG 2.0 Set
Choose your breakdown that is equal to or less than 1000lbs. You may note your breakdown in the comments box during checkout.
3 Ships Free
10LB HG 2.0 Plate - Pair
(2) 10LB Plates
15LB HG 2.0 Plate - Pair
(2) 15LB Plates
25LB HG 2.0 Plate - Pair
(2) 25LB Plates
35LB HG 2.0 Plate - Pair
(2) 35LB Plates
45LB HG 2.0 Plate - Pair
(2) 45LB Plates
55LB HG 2.0 Plate - Pair
(2) 55LB Plates

Gear Specs

Brand Rogue Fitness
Plate Type Multipurpose
Made In USA No
Diameter 450mm
Durometer 88
10LB Plate Width 1"
15LB Plate Width 1 3/8"
25LB Plate Width 2"
35LB Plate Width 2 3/4"
45LB Plate Width 3 1/4"
55LB Plate Width 3 3/4"
Durometer Rating
  • 65
  • 70
  • 75
  • 80
  • 85
  • 90
  • 95
  • 100
Softer = More Bounce Harder = Less Bounce

Rogue HG 2.0 Bumper Plates

Same quality plates, revamped design. Rogue HG 2.0 Bumpers feature new artwork (still black, still old school), with the consistent dead bounce, durability, and distinctive smooth finish athletes have come to expect from the HG line. These quality, budget-priced plates are the IWF standard 450mm in diameter, but are cut thinner than a lot of comparable bumpers to allow for more weight to be loaded on the bar. HG 2.0’s also score an average of 88 on the Shore A Durometer scale, giving them a dead blow on par with a lot of the pricier comp plates in the industry.

Battle-tested at the CrossFit Games and Regionals, HG Bumper Plates are both a high-performance and smart economical choice for any training facility. Check out the wide range of plate sets or simple pairs available to order on the right column, or read the reviews below to see what current HG Bumper owners have to say about the product.

See more: Bumper Plates from Rogue here.


  • Diameter: 450mm / 17.72 inches (IWF Standard)
  • Collar Opening: 50.40mm / 1.98 inches
  • Stainless Steel Inserts
  • Weight Tolerance: +/- 1% of claimed weight
  • Minimal Bounce
  • Updated artwork with Rogue logo in black on black
  • Imported from China

Warranty: 10-15LB variant plates are warrantied for 90 days. The 25-45 LBS variants are warrantied for 3 years.

Rogue HG 2.0 Bumper Plates is rated 4.7 out of 5 by 57.
Rated 4 out of 5 by from Good bumpers with nice finish Have around 500lbs of these in about every weight. Little slippery out of the box but that goes away with use. Would rank a five star if made in the USA.
Date published: 2017-08-01
Rated 5 out of 5 by from That there's a high-quality item, Clark I purchased this set online Saturday afternoon and they were unpacked in my gym 72 hours later. Great plates. My buddies are jealous!
Date published: 2017-06-28
Rated 5 out of 5 by from Good Plates Great looking plates that work well. They fit great on my Ohio Power Bar. I was worried about noise at first after reading some of the reviews, but they seem to be fine. Maybe if you're doing Crossfit or lots of Olympic lifts, you might want to look at the Hi-Temps, but for powerlifting these will do the job.
Date published: 2017-06-21
Rated 5 out of 5 by from Great features I'm glad I found the right one! this is a really great place to find equipment
Date published: 2017-02-05
Rated 5 out of 5 by from Great Bumper Plates I have zero complaints about these. Make sure you get a storage rack of some sort as it will get annoying quick to have to pick the 45s up. Great bounce, look great, definitely recommend.
Date published: 2016-03-16
Rated 5 out of 5 by from IMO - better than the Hi-Temps I used the High-Temp plates at a crossfit gym for several months, and they were OK. Notably, they bounce a LOT, and the 10lb plates are very weak and bend easily. I decided to try these HG 2.0 bumpers for my home gym, and I'm very glad I did. They bounce MUCH less than the High-Temps, though that energy has to go somewhere so they are louder when dropped. They are also stiffer than the High-Temps. I wouldn't recommend dropping a bar with only 10's on it, as you will eventually destroy the plates - but these are much stiffer and hold up much better than the High-Temps. One issue that may be relevant to some people is the HG 2.0 are much smoother than High-Temps, so they will show wear sooner. I use mine inside on a stall-mat floor, so this is no issue. However, if you use your bumpers outside or on pavement, the High-Temps might be better.
Date published: 2015-11-29
Rated 5 out of 5 by from 2 years and still going strong I have had these plates for 2 years now. This is two years of 6 day a week training with me and other people using them. They are work horses. They have been dropped on rubber and cement. From deadlift height and from over head. Tough, tough, tough. I would recommend these to ANYBODY who needs quality bumper plates for a low price.
Date published: 2015-11-04
Rated 5 out of 5 by from HG 1 - 10lb Pair I only have two pair of the 10s but they are really great for my wife to use for doing bent over rows and warming up on deadlifts while still being able to pull from the proper height. I'm impressed with the quality, especially for the price, and I expect them to hold up for many years. The 10s are obviously very thin so use collars to keep the plates vertical to help prevent bending and don't drop the bar with just 10s on there.
Date published: 2015-02-13
  • y_2017, m_8, d_14, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_57
  • loc_en_US, sid_HG22908, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue