Rogue R-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.8
100 Reviews
Made in U.S.A.

Rogue R-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.8
100 Reviews
Made in U.S.A.
$495.00
Product Description

Space Saving Power Rack, Made in the USA

The goal with the R-3W was to develop a wall-mount unit that could be folded inward or outward for space efficiency, yet still offer the sturdiness of our standard R-Series racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull-up rig, or power rack, the feel is miles beyond lighter fold-back setups that use thinner steel.

Read More

Rogue R-3W Fold Back Wall Mount Rack

Space Saving Power Rack, Made in the USA

The goal with the R-3W was to develop a wall-mount unit that could be folded inward or outward for space efficiency, yet still offer the sturdiness of our standard R-Series racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull-up rig, or power rack, the feel is miles beyond lighter fold-back setups that use thinner steel.

The R-3W Fold Back Rack features a pair of 2x3" 11 gauge steel uprights, Westside hole spacing through the bench/rack pull zone, and 2"-on-center spacing above and below. It’s compatible with most Infinity Series accessories, and is available in two depths: 20.5" and 40.5". The system also comes standard with a quick-attach pull-up bar, a set of Infinity J-cups, 4 mounting brackets for installation, and 4 detent pins to lock the rack into either the open position (ready for use) or closed position (against the wall). A set of UHMW plastic caps are attached to the base of each upright to protect your floor and allow the sides of the rack to freely swing in and out.

Optional Fold Back Rack Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

ATTN: Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.

Gear Specs

Specifications

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 2x3" 11 gauge steel, 90.375" height
  • Inside Depth: Inside depth - 20.5" or 40.5"
    Stringer Not Included
  • (1) Set of Infinity J-Cups
  • (4) Mounting Brackets
  • (4) 5/8" x 5" Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 5/8" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Black Powder Coat Finish
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface

See Also: The 3x3" Monster Lite version of the Fold Back Rack

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Loading

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight140LB or 160LB
LengthFrom Wall - 24" or 44"
Width55" Overall (On wall)
47" Outside uprights
43" Inside upright
Height90.375"
Foot Print24" or 44" x 55" (On wall)
Steel Notes2x3" 11 gauge steel
Other Product SpecsInside depth - 20.5" or 40.5"
Stringer Not Included
Infinity CompatibleYes

KEY FEATURES OF THE RML-3W

Loading
1

Heavy Gauge American Steel & Hardware

The R-3W uses heavy-duty 2x3" 11 gauge steel uprights with 5/8" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The R-3W rack is compatible with most of our exclusive Infinity accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

Loading
2

Choice of Depth

The Fold Back Rack is available in two depths: 20.5" and 40.5". With the 20.5" depth unit, the sides of the rack will position flush against the wall whether your swing them inward (towards each other) or outward. With the 40.5" depth rack, the sides can still fold in or out, but if both are moved inward, there will be a slight overlap—so to open up max space, you’d want to fold either both sides outward or one inward and one outward. For most setups the 20.5" is the best choice. Choose 40.5" if you need more space in the rack for gymnastic movements.

Loading
3

Fit, Finish & Lifetime Warranty

Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The R-3W is guaranteed by Rogue for Life.

Loading
4

Space Efficiency

The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5” of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

Loading
5

Easy Installation + Optional Stringers

Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2” on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (3/8" x 2-1/2" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

STRINGER INSTALLATION

Play Video

Recommended Products

Reviews

dlsurrette
Mississippi
★★★★★
★★★★★
6 days ago
Great Quality
I purchased this system four months ago. I’ve been very impressed with the quality and strength of the steel. Everything I’ve ordered exceeded my expectations
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Connor P
DFW
★★★★★
★★★★★
3 weeks ago
Perfect Rack, Works as Shown
I am really impressed with everything from rogue, but specifically this rack. The quality is perfect. It’s super sturdy, installation took one afternoon and it’s just what you need. I was actually really surprised how sturdy the rack is. Even when doing pull-ups on the pull-ups bar, the rack does not move a millimeter, it does not squeak or jiggle, it’s just perfect still. Really just a great product and it’s so worth the money.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
D Jolivette
★★★★★
★★★★★
4 weeks ago
BEST INVESTMENT EVER
This is the best investment I have ever made for myself!! Don't have to wait at the gym that is overcrowded with people taking selfies. Multiple attachments to add on.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
Jkelley3209
Houston Tx
★★★★★
★★★★★
4 weeks ago
Great product. Easy install.
Has been a great piece of equipment. Handles a 230 man doing pull up all day. Have only racked up to 195 on it but definitely sure that it could handle more. Install went fairly smooth. Would suggest having a laser lever and quality stud finder.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
rcandy24
Charleston, SC
★★★★★
★★★★★
June 25
Love our Wall Mount foldable rack!!
We have been very pleased with our R-3W wall mount rack! We went with the 40.5" version for some extra space. Only downside is that we didn't realize that the arms could not fold in with the longer version so you must fold them out or one in and one out. It's completely ok for our space but I may have gone with the shorter version had I known. The rack is sturdy and looks amazing in our garage gym setup!
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
Flavor
Montebello Ca
★★★★★
★★★★★
June 21
I love the R-3W fold back mount wall
It fit great in my garage and the quality is awesome it will last for life time great product
Yes, I recommend this product
Helpful?
Yes · 2
No · 1
GS0723
Orlando, florida
★★★★★
★★★★★
June 10
Great and sturdy!
Drilled it in my garage and it works perfectly! Very strong and sturdy.
Yes, I recommend this product
Helpful?
Yes · 1
No · 1
spj_777
Los Angeles, CA
★★★★★
★★★★★
June 3
Exactly what I wanted! Space saver!
With only about 8' X 6' of room to spare, the Rogue R-3W rack was the way to go. The instructions are easy to follow, and the assembling is fairly simple. The challenging part was attaching the stringers to the 4 studs. A tip of advice I would give for those who got the stringers > the stringers come in a box with a piece of cardboard in between them that has the same length as the stringer, so what I did was square it to one of the stingers & traced out the sections where the wood lag screws hold it in place. Using a pocket level and painters tape, I lined up and secured the cardboard in place after finding the four studs and proceeded with making the pilot holes. This saved me a lot of time.
Yes, I recommend this product
Helpful?
Yes · 3
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery