Boneyard Rogue CB-4 38mm Camber Bar

Made in U.S.A.

Boneyard Rogue CB-4 38mm Camber Bar

Made in U.S.A.
$420.00
Product Description

All closeout items must be shipped, pick-up not available. All sales are final. Items are in NEW condition.

ROGUE CB-4 38MM CAMBER BAR

The Rogue CB-4™ 38MM Camber Bar was developed in collaboration with Westside Barbell, and made its public debut as the “Double T” Bar at the 2022 Arnold Strongman Classic (nick-named in honor of the late Dr. Terry Todd)

Read More

All closeout items must be shipped, pick-up not available. All sales are final. Items are in NEW condition.

ROGUE CB-4 38MM CAMBER BAR

The Rogue CB-4™ 38MM Camber Bar was developed in collaboration with Westside Barbell, and made its public debut as the “Double T” Bar at the 2022 Arnold Strongman Classic (nick-named in honor of the late Dr. Terry Todd). The goal with this design was to build a curved / bowed specialty bar suited not only to the world’s top powerlifters and Strongmen, but athletes of every size and ability level. To get there, we started with a series of different prototypes–of varying diameter, bend angle, and knurl pattern–and sent them all over to the least compromising focus group in the iron game: the athletes at the Westside Barbell Gym. Through their repeated testing and direct feedback, we were then able to determine which specs best delivered all of the key benefits we were looking for.

Design Intent:

  1. A bar that takes pressure off of the shoulders and elbows, allowing athletes with flexibility issues or injuries to continue to squat heavy. 
  2. A bar that accommodates the size of the strongest competitive and at-home lifters, giving them room to place their hands wider apart than a standard barbell.
  3. A bar that allows athletes to increase their range of motion when benching while, again, keeping undue stress off of the shoulders and elbows. 
  4. A bar that enables athletes to build strength with less weight . . . specifically, by providing the optimum drop between the center of the bar and the sleeves, the athlete is forced to keep the lower back tight in the squat, resulting in a stimulus greater than that of the same weight on a straight bar. 
  5. A bar that does not bounce at high weights of 900 LBS or more, reducing safety risks.

The solution was the CB-4 Camber Bar, a 60LB, 38MM curved power bar with a 4.4” drop and a substantial 55” wide bend, giving athletes of every size the ability to find a point on the curve that works for them. In addition to allowing more hand placement flexibility, the extra 9” of distance between the sleeves also ensures that–on most racks– the cambered portion of the bar won’t flip down when unsupported. 

The 95” shaft of the CB-4 is machined at our Columbus factory with our power bar knurl, then precision-bent by one of our local partners and finished with a Black Cerakote coating for excellent corrosion resistance and a firm grip. The rotating sleeves are friction welded and machined in-house and given our new proprietary matte black finish, which is the best in the industry for extending the vibrancy and longevity of the color. Once assembled, all bars are individually tested and assessed for quality before shipping out. This includes ensuring that each sleeve is straight, within an angle tolerance of +0.5 / -0.0 degrees.

*Please Note: The optional Proprietary Matte Black metal treatment process also hardens the steel, which can cause some additional friction with plates that have a chamfer.

Gear Specs

SPECIFICATIONS:

  • Made in the USA
  • Specialty Powerlifting Bar
  • Diameter: 38MM
  • Length: 95"
  • Loadable Sleeve Length: 16"
  • Extra 9” Between Sleeves
  • Curve/Bend: 4.4” Drop
  • Weight: 60LB
  • Sharp Power Knurl + Center Knurl
  • Friction-Welded Rotating Sleeves
  • Shaft Finish: Black Cerakote
  • Sleeve Finish: Proprietary Matte Black Finish
  • Sleeve Angle Tolerance: +0.5 / -0.0 Degrees
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

1) What is a Boneyard Bar?

A Boneyard Bar is a brand new, seconds quality barbell off of Rogue’s standard production line. These bars may have minor cosmetic issues such as finish blemishes or inconsistencies with the knurl. If any flaw is found on a Rogue standard barbell, it is added to the Boneyard. These bars are guaranteed to arrive in new, ready to hit the gym condition.

2) Do all Boneyard Bars have finish blemishes?

No. A bar could have also been sent to the Boneyard for double tracked knurling (see below). Finish blemishes are more noticeable on Black Zinc or Black Oxide finishes.

Please note: Bars with a Cerakote finish may have some logo branding on the shaft due to testing our custom bar processes.

3) Do all Boneyard Bars have double tracked knurling?

No. Double tracked knurling is just one of the issues that can cause a bar to be sent to the boneyard. A small surface blemish could be the only fault. (See image below for double tracked knurl description)

4) Will my Boneyard Bar have a center knurl?

Please see the product page of the regular version.

5) Will my Boneyard Bar have dual knurl marks?

Please see the product page of the regular version.

6) Will Raw Steel rust?

A Raw Steel barbell will require some upkeep. Occasionally brushing the bar down with 3-in-1 oil or WD-40 will create a beautiful patina look. This is how bars were made for decades and it really does produce an unmatched feel.

7) Do Boneyard Bars carry a warranty

No. All Boneyard Bar sales are final.

8) Where can I find more information on each specific Bar?

All Boneyard Bars will have its standard name included in the product title. Please see that product's page for more information.

*Note: We do not specify the bushing type for Boneyard Bars

The Boneyard Bar you are purchasing can come with either composite or bronze bushings. You can check the regular page of the Boneyard Bar you are looking to purchase to determine if it normally includes composite bushings or not