/Monster 43" Flip-down Safeties (Pair)

Monster 43" Flip-down Safeties (Pair)

★★★★★

4.9

8 Rezensionen

Hergestellt in den USA.

Monster 43" Flip-down Safeties (Pair)

★★★★★

4.9

8 Rezensionen

Hergestellt in den USA.

416,50 €

Ohne Umsatzsteuer

350,00 €

Produktdaten
Marke	Rogue Fitness
Farben	Schwarz
Hergestellt in den USA	Ja
Länge	43"
Breite	3"
Stahlinformationen	11 gg starker Stahl mit 3 x 3"
Weitere Spezifikationen	Auskleidung mit UHMW-Kunststoff
Kompatibel mit der Monster-Serie	Ja

Produktbeschreibung

Die Rogue Monster 43" Flip Down Safeties werden aus 3 x 3" 11-Gauge Stahl hergestellt und sind ausschließlich für die Verwendung mit der 43"-Tiefe eines Rogue Monster Racks oder Rigs konzipiert. Für Athleten, die alleine trainieren und etwas mehr Sicherheit wollen, bieten die Flip-Down Safeties zuverlässigen Schutz und sind auch stabil genug, um als Plattform für Rack Pulls / Pin Pulls zu dienen. Die Montage der Halterungen an der 3x3” Monster-Serie ist schnell - sie werden einfach zwischen den Pfosten eingeschoben und sicher in die Spotterposition geschwenkt.

Mehr lesen

Monster 43” Flip-Down Safeties (Paar)

Auf der Oberseite und den Verschlüssen der Flip-Down Safeties befindet sich eine UHMW-Kunststoffabdeckung, die hilft, eine Beschädigung der Rändelung der Stange bei einem Fall zu vermeiden.

Wichtig: Dieser Artikel ist NUR mit den Rigs und Racks der Rogue Monster-Serie kompatibel

Produktdaten

Spezifikationen:

Hergestellt in den USA
Lieferung paarweise
11 gg starker Stahl mit 3 x 3"
Lochungen mit mittigem Abstand von 2”
Mit UHMW-Kunststoff zum Schutz der Langhantel
Einfache Einschiebe- und Verriegelungsinstallation
Beinhaltet (2) Monster Hitchpins
Kann auch als Zugplattform verwendet werden
Farbe: Schwarz

Versand

Schneller Rogue Versand

Mit dem Rogue Shipping System kannst du deine Bestellung online verfolgen.

Empfohlene Produkte

Rezensionen

Kommentar 1–8 von 8

Meatball83

★★★★★

March 29

Built heavy but easy to put on and take off

These are great! Easy to mount and easy to remove! We use them on a fm-6 and honestly feel this is the only way to go for safeties.. If this is your setup.. get some rogue strips to have easy storage up of the floor..

Ursprüngliche Quelle des Beitrags: roguefitness.com

Whats his name

Missouri

★★★★★

February 14

Just what I was looking for

Bought these specifically for rack pulls and rows. They work great. Very well built and heavy which is what I wanted so I don't have any complaints. Easy on the barbell knurling if that’s important to you. Definitely a more solid option than pin/pipe safeties for me personally. Highly recommend.

Ursprüngliche Quelle des Beitrags: roguefitness.com

Nessy

★★★★★

Apr 2022

Very solid

Very robust safety... super heavy of course, so if you're sharing with say your wife as I am, you'll be moving them often - keep that in mind. They're very well designed and made, although, I did have to sand down one of the UHMW pads on one of them to get it to fit around the upright - wasn't even close so I'm not sure how that was missed in quality control. If you lift heavy, this will definitely do the trick.

Ursprüngliche Quelle des Beitrags: roguefitness.com

Avengers Garage Gym

Meridian, ID

★★★★★

Jun 2021

Complete confidence

Purchased these along with my RM-4 2.0 and have been using them for about five months. The design and sturdy construction offers peace of mind when it comes to safety. Such design does create a heavy safety, but, hey, you're lifting weight anyways. This shouldn't be a problem. However, young, small frame, or beginning athletes might take a bit longer or prefer assistance to change these to a different height. I'd choose this safety option again.

Ursprüngliche Quelle des Beitrags: roguefitness.com

HARDRockj

ATLANATA,GA

★★★★★

Mar 2021

Rogue tough

got these with my RM6. they are very solid. takes a little time to get use to.

Ursprüngliche Quelle des Beitrags: roguefitness.com

JerTheBear

Chandler, AZ

★★★★★

Jan 2021

Solid!

I bought these as part of my RM-6 Monster Rack configuration. I modeled my RM-6 after a commercial gym's Hammer Strength power rack that I used for several years and really liked. These are rock solid safeties. While pins and straps work A-OK and are easier to adjust, these rule psychologically. Besides, my rack is my toy. My squat and bench safety height is identical. My safeties are never moved. But, their solidity had an unforeseen benefit. About a year and a half ago, I suffered a couple of non-lifting injuries to my knee and ribcage that made it difficult to move much less lift. As I healed, the solidity of the Monster Rack, and these safeties in particular, allowed me to do stretching movements with no fear that something was going to shift and that I would reinjure myself. I would not have been as confident with pins or straps.

Ursprüngliche Quelle des Beitrags: roguefitness.com

thatcheeseguy

Bakersfield, CA

★★★★★

Oct 2020

I like these

MAKE THEM FOR THE ROGUE MONSTER LITE SERIES K THANKS

Ursprüngliche Quelle des Beitrags: roguefitness.com

JGilesIronMonkey

Franklin Square, NY

★★★★★

Jan 2020

Best Safeties I've every owned!

We use these on our racked Monster Rig at Iron Monkey Strength. Our students find it easy to put up and take down as needed. They are tough as all heck and great for racked pulls too.

Ursprüngliche Quelle des Beitrags: roguefitness.com

Kommentar 1–8 von 8

#RYOUROGUEMarkiere deine Fotos auf Instagram und Twitter mit #RYOUROGUE, damit sie in unserer Galerie gezeigt werden könnenVollständige Galerie anzeigen

Monster 43" Flip-down Safeties (Pair)

Monster 43" Flip-down Safeties (Pair)

Produktdaten

Produktbeschreibung

Mehr lesen

Monster 43” Flip-Down Safeties (Paar)

Produktdaten

Versand

Schneller Rogue Versand

Ähnliche Artikel

Empfohlene Produkte

Rezensionen