Rogue T-5KG Technique Bar







Rogue T-5KG Technique Bar
Produktbeschreibung
The newly redesigned T-5KG Technique Bar is now fully machined and assembled at our Columbus, Ohio plant, and includes a bare aluminum construction with two precision needle bearings in each sleeve. With Olympic knurl marks and IWF standard spacing between the collars, this is another lightweight Rogue training bar optimized for helping athletes transition smoothly from lightweight training to the use of a men’s or women’s competition barbell.
Mehr lesen
Rogue T-5KG Technique Bar
The newly redesigned T-5KG Technique Bar is now fully machined and assembled at our Columbus, Ohio plant, and includes a bare aluminum construction with two precision needle bearings in each sleeve. With Olympic knurl marks and IWF standard spacing between the collars, this is another lightweight Rogue training bar optimized for helping athletes transition smoothly from lightweight training to the use of a men’s or women’s competition barbell.
Produktdaten
Specifications:
- Made in the USA
- Bar Weight: 5KG
- Diameter: 25MM
- Olympic Knurl Marks (no center knurl)
- Bar Length: 79.13"
- Distance Between Sleeves: 51.50"
- Loadable Sleeve Length: 12.50"
- Coating: Bare Aluminum
- Compatible with standard bumper plates
- Max weight capacity: 45LB / 20KG
Versand
Rogue Fast Shipping
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.


Produktdaten | |
Marke | Rogue Fitness |
Garantie | Aufbau: 45 lb/20 kg Gewichtslimit |
Hergestellt in den USA | Ja |
Beladbarer Anteil der Aufnahmen | 12.50" |
Gesamtlänge | 79.13" |
Abstand zwischen Scheibenaufnahmen | 51.50" |
Durchmesser | 25MM |
Stangentyp | Junioren-Stangen |
Gebrauch | Techniktraining |
Drehlager Nadellager | Nadellager |
Stangengewicht | 5KG |
Rändelung | Multi |
Mittelrändelung | Nein |
Griffmarkierungen | Olympische Spiele |
Beschichtung der Stange | Blankes Aluminium |
Beschichtung der Aufnahmen | Blankes Aluminium |
Zugfestigkeit | 42,000 PSI |

NADELLAGER
A set of needle bearings in each sleeve gives the T-5KG Tech Bar a uniquely smooth, consistent spin. Traditional technique barbells have rarely ever utilized this type of sleeve construction, and it introduces a high-end performance category into lightweight training.

AUSGEFEILTE TECHNIK
A tech bar is most effective when it’s designed to prepare you for what’s next, whether you’re a young athlete using your first barbell, an amateur looking to safely practice your form, or an experienced lifter working your way back from an injury. The T-5KG is ideally suited for all these circumstances, offering a lightweight, manageable Olympic training bar with knurling and collar spacing accurate to IWF regulations.

ROGUE-DESIGN „MADE IN USA“
We now manufacture the T-5KG right here in Columbus, Ohio, using a lightweight but durable bare-aluminum construction. The shaft measures 25MM in diameter and 79.13" in length, while the bearing sleeves offer a loadable length of 12.50". The single Oly knurl marks feature an exclusive Rogue pattern for a firm but non-abrasive hold.

MODERNE LÖSUNG FÜRS TECHNIKTRAINING
Rogue has long believed that our technique, beginner, and rehab bars should reflect the same level of quality and craftsmanship as any competition bar in our fleet. The T-5KG Tech Bar is part of a growing series of developmental bars we’re building in-house, including the T-2.5KG Tech Bar, 5KG Junior Bar, the Rogue War Bar, and more. Each has its own unique qualities and design specs to meet the specific needs of a wide range of athletes.

KOMPATIBILITÄT MIT HANTELSCHEIBEN
The 1.96” sleeve diameter makes the T-5KG Tech Bar fully compatible with most standard size bumper plates, with a max load capacity topping out at 45LB, or 20KG. This bar is NOT built for for loads in excess of that amount, and athletes are also advised against dropping the bar when loaded.