Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.7
677 Comentarios
Fabricado en EE.UU.

Rogue Kettlebell - E Coat

★★★★★
★★★★★
4.7
677 Comentarios
Fabricado en EE.UU.
KB-9LB (4KG) Rogue Kettlebell - E Coat
36,30 €
KB-13LB (6KG) Rogue Kettlebell - E Coat
42,35 €
KB-18LB (8KG) Rogue Kettlebell - E Coat
48,40 €
KB-26LB (12KG) Rogue Kettlebell - E Coat
54,45 €
KB-35LB (16KG) Rogue Kettlebell - E Coat
72,60 €
KB-40LB (18KG) Rogue Kettlebell - E Coat
78,65 €
KB-44LB (20KG) Rogue Kettlebell - E Coat
84,70 €
KB-53LB (24KG) Rogue Kettlebell - E Coat
94,38 €
KB-62LB (28KG) Rogue Kettlebell - E Coat
108,90 €
KB-70LB (32KG) Rogue Kettlebell - E Coat
121,00 €
KB-80LB (36KG) Rogue Kettlebell - E Coat
133,10 €
KB-88LB (40KG) Rogue Kettlebell - E Coat
151,25 €
Libras hasta que reciba Hundo precio
500LB
Precio total:
0,00 €

Especificaciones del producto

MarcaRogue Fitness
ColorNegro
Fabricado en EE. UU.
Peso del productode 9 libras a 88 libras
LongitudVaría según el peso
AnchoVaría según el peso
AltoVaría según el peso
Otras especificaciones del productoAcabado con recubrimiento electroforético (e-coat) negro
Diámetro del asa9LB-18LB : 1,2"
26LB : 1,4"
35LB-88LB : 1,5"
Descripción del producto

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

Leer más

Rogue Kettlebell - E Coat

Cast in northern Michigan by Cadillac Casting, Inc., these ductile iron Rogue Kettlebells represent our new, exclusive line-up of American-made KBs. The series is currently available in 12 weight increments, from 9 LB to 88 LB, and features a black E-Coat finish. Debossed weight indications are marked on one side (in both LB and KG), with Rogue branding on the other.

What Sets the New Rogue Kettlebells Apart:

MaterialDuctile Iron
Significantly more durable than traditional gray iron with a higher tensile strength and yield strength + greater corrosion resistance.
FinishE-Coat
Known for its excellent adhesion, even coverage and toughness, our E-coat finish is applied in a thin durable layer that allows the texture of the casting to be felt while still being easy to clean.
Gloss~22 GU Rating
These KBs have a higher gloss appearance (approx 22 gloss units, or “semi gloss”) than our powder coat KBs [0.5 to 1.5 GU, or “low gloss”).

As noted above, Cadillac’s use of single-piece ductile cast iron creates a kettlebell that is stronger and tougher than standard gray cast iron. The electrically-applied E-coat finish—noted for its superior adhesion and corrosion resistance—also goes on thinner than a traditional powder coat allowing for a lustrous finish without losing the underlying texture of the casting. A flat, machined base allows for steady storage with no wobble, and the handle diameter varies from 1.2” to 1.5”, depending on the weight.

We’re proud to have developed this line with the team at Cadillac Casting, a privately owned Midwest foundry with nearly 100 years of history in metal casting, and an unmatched reputation for quality.

Note: *Due to the casting process, cast products may have minor variances in the finish.

Especificaciones del producto

Specifications

  • Made In USA
  • Cast by Cadillac Casting, Inc.(Cadillac, MI)
  • Ductile Cast Iron Construction
  • Available Weight Increments: 9 LB to 88 LB
  • Bell Dimensions: Vary By Weight
  • Finish: Black E-Coat, Semi-Gloss
  • Handle Diameter: 1.2" (9LB-18LB), 1.4" (26LB), 1.5” (35LB-88LB)
  • Flat Base for easier storage, no wobble
  • Debossed Weight Indications and Rogue branding
Envío

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.


KEY FEATURES OF THE ROGUE KETTLEBELL - E-COAT

Fabricadas en EE.UU. - Fundición en Cadillac

The town of Cadillac, Michigan has a long and storied manufacturing history, and Cadillac Casting, Inc., has been a big part of it, designing and producing a wide variety of complex and safety-critical components for the automotive industry and other industrial clients since the 1920s. This reputable, privately owned foundry employs 400 highly skilled workers, and they were more than equipped to produce the tooling for our kettlebells in-house.

Hierro dúctil

All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron, aka nodular cast iron, which contains strong graphite nodules that make it considerably tougher than standard gray iron. Ductile iron is regularly used to make automotive components, wheels, gear boxes, and machine frames, and its superior tensile strength, yield strength, and corrosion resistance makes it an ideal option for a long-lasting, extremely robust kettlebell.

Acabado electroforético (E-coat)

This electrically-applied paint coating was also initially developed for the automotive industry, due to its excellent adhesion, even coverage, and corrosion resistance. As a wet application, our gloss E-coat goes on thinner than powder coating, resulting in a smooth feel that retains more of the natural grit of the casting. While E-Coat Kettlebells will hold chalk, they are easier to clean than traditional powder coat KBs.

Brillo y logo

Because of the E-Coat finish, these Rogue Kettlebells have a semi-gloss appearance and a gloss rating of approx. 22 GU (gloss units), which rate between 0.5 and 1.5 GU. The black shine/gloss of the finish is complemented in the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell, and Rogue branding on the other.

Una amplia selección

Whether you’re purchasing a single set of KBs for your garage gym or outfitting a large facility, this first series of Rogue E-Coat Kettlebells is available in a wide range of weight increments to suit any goal—from lightweight beginner bells (starting at 9LB / 4KG) up to 88 LBS / 40 KG. The handle diameters, noted below, range from 1.2” to 1.5”.Please Note: The actual weight of each kettlebell is designed to match the KG weight. So for example, the 35LB E-Coat Kettlebell is actually spec'd to weigh exactly 16KG with a +3% / -0% tolerance.
Rogue E-Coat Kettlebell Handle Diameters:
9LB - 18LB: 1.2"
26LB: 1.4"
35LB - 88LB: 1.5"

Aprobadas para los ACFT

The 40LB Rogue Kettlebell has been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment that replaced the previous 3-event Army Physical Fitness Test in 2020. The grueling new ACFT is neutral across all genders and age groups, and includes a strength deadlift, standing power throw, hand-release push-ups, sprint/drag/carry, leg tuck, and a 2-mile run.

Productos recomendados

Comentarios

1 - 8 de 677 Reseñas
Joeri
★★★★★
★★★★★
Mar 2024
Top
Kettlebell like it´s meant to be, nothing more to say actually
Sí, recomiendo este producto
¿Útil?
Sí · 37
No · 0
PhuongB
★★★★★
★★★★★
Mar 2024
Great stuff!
Love these, they make me feel tough - and am excited to use them as often as possible!
¿Útil?
Sí · 7
No · 0
Fabi
★★★★★
★★★★★
Feb 2024
Best Kettlebell out there
Just plain and simply great to train with. Well balanced and the grip of the handle is perfect for me. Would absolutely recommend.
Sí, recomiendo este producto
¿Útil?
Sí · 1
No · 0
florentday
Lyon France
★★★★★
★★★★★
Mar 2023
amazing quality
This is the fourth kettlebell brand I try, and this kettlebell is the best by far. The handle's lenghth is perfect for swings and get up, finish is also very good.
Sí, recomiendo este producto
¿Útil?
Sí · 16
No · 0
KevA44
Portsmouth, England
★★★★★
★★★★★
Oct 2022
Fantastic KBs
I've got a pair of the E coats (16 & 24kg) and a pair of the powder coated (12 & 20kg) KBs. All are great but the E coats are the next level up. Smoother in the hand and a higher quality of build. They are a little more money but they are worth the extra!
Sí, recomiendo este producto
¿Útil?
Sí · 10
No · 0
bacemint
Austria
★★★★★
★★★★★
Aug 2022
great kettlebell - great quality
Bought my first kettlebell a few weeks ago and bought a heavier one for the legs a few days ago. Very good quality and holds chalk pretty well - no slipping
Sí, recomiendo este producto
¿Útil?
Sí · 4
No · 0
Coimbra, Portugal
★★★★★
★★★★★
Jun 2022
Perfection at 36kg
I bought this a few months ago to add some weight and train unilaterally. It’s a solid, well made piece of equipment. The price is incredible compared to other sites online like, kettlebell kings. Buy a quality on: swing it, clean it, squat it and press it and you’ll be well on your way.
¿Útil?
Sí · 2
No · 1
Tony G
London UK
★★★★★
★★★★★
May 2022
Feels good
Very happy with this purchase. This Kettlebell feels good to handle and work with, the E Coat has a premium feel which both suits the metal and feels very comfortable.
Sí, recomiendo este producto
¿Útil?
Sí · 4
No · 0
#RYOUROGUE¡Asegúrate de incluir el hashtag #RYOUROGUE en tus fotos de Instagram y Twitter para aparecer en nuestra galería!Ver galería completa