Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
1018 Reviews
Made in U.S.A.

Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
1018 Reviews
Made in U.S.A.
$600.00
Product Description
Gear Specs
Shipping
Product Description

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

Read More

ROGUE RML-3W FOLD BACK WALL MOUNT RACK

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

A Rogue original Fold Back Rack is built with two 3x3" 11 gauge steel uprights, laser cut in Columbus, Ohio, with Westside hole spacing through the bench/pull area, and 2"-on-center spacing above and below. All steel is powder coated in the Rogue factory for a durable finish.

Optional Fold Back Rack Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

ATTN: Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.

Gear Specs

Specifications

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 3x3" 11 gauge steel, 90.375" height
  • Inside Depth: Inside depth - 21.5" or 41.5"
    Stringer Not Included
  • (1) Set of Monster Lite J-Cups
  • (4) Mounting Brackets
  • (4) 5/8" x 5" Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 5/8" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10-1/8" tall, 13/16" extension off the mounting surface

See More: Rogue Power Racks

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight163LB or 190LB
LengthFrom Wall - 24.75" or 43.75"
Width56.1875" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height90.375"
Foot Print24.75" or 43.75" x 56.1875"(On Wall)
Steel Notes3x3" 11 gauge steel
Other Product SpecsInside depth - 21.5" or 41.5"
Stringer Not Included
Monster Lite CompatibleYes

KEY FEATURES OF THE RML-3W

1

HEAVY GAUGE AMERICAN STEEL & HARDWARE

The RML-3W uses heavy-duty 3x3" 11 gauge steel uprights with 5/8" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The RML-3W rack is compatible with most of our exclusive ML accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

2

CHOICE OF DEPTH

The Fold Back Rack is available in two depths: 21.5" and 41.5". In the 21.5" version, the sides of the rack will position flush against the wall whether you swing them inward (towards each other) or outward. With the 41.5" depth rack, the sides can still fold in or out, but if both are moved inward, there will be a slight overlap—so to open up max space, you'd want to fold either both sides outward or one inward and one outward. For most setups the 21.5" is the best choice. Choose 41.5" if you need more space in the rack for gymnastic movements.

3

FIT, FINISH & LIFETIME WARRANTY

Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The RML-3W is guaranteed by Rogue for Life.

4

SPACE EFFICIENCY

The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5" of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

5

EASY INSTALLATION + OPTIONAL STRINGERS

Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2" on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (3/8" x 2-1/2" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

Stringer Installation

Recommended Products

Reviews

Anon
Cairns
★★★★★
★★★★★
3 weeks ago
Solid!!
Great use of materials, making it heavy duty. Even if your floor is out of level, there is enough tolerance in the arms to correct itself. Super impressed
Yes, I recommend this product
Originally posted on rogueaustralia.com.au
Folz Fitness and Wellness
Saint Cloud, MN
★★★★★
★★★★★
4 weeks ago
Rogue is nestling in rather cozy in my garage gym
Beyond satisfied so far with the wall mount rack, matador, bench, vertical barbell wall mount, kettlebells, plyo box, rower, bands and band wall mount holder. Even more satisfied with how quickly they shipped to me in MN from OH.
Yes, I recommend this product
Green Wall Mount rack, matador & vertical barbell wall mount
Band holder and bands
Rogue Bench
Helpful?
Yes · 0
No · 0
Zzzzzzzzz
Virginia
★★★★★
★★★★★
April 10
Reviews for the WIN
Thanks to all the reviews! I ordered this rack, barbell set, and the adjustable bench and it all came in so fast (literally 2 days in total). Got it set up with my friend in less than an hour. I also went and ordered the rolling weight holder. Cant wait to put it together.
Yes, I recommend this product
Love the color and set up!
Helpful?
Yes · 1
No · 0
Jen C
Canberra ACT
★★★★★
★★★★★
April 5
Solid as a rock, easy to install.
This rack is perfect in my gym. Easy to install and feels really solid. Takes up hardly any room when folded. I watched a few videos before I installed and followed someone’s recommendation to use decking screws for temporary holding of the stringers - worked a treat.
Yes, I recommend this product
Originally posted on rogueaustralia.com.au
JVelasquez
Richmond, Va
★★★★★
★★★★★
March 31
Love IT! Built Tough!!
I bought this a month ago and installed it myself. The stringers totally made this a lot easier to install than if I didn’t have them. I’m average in the “handy” department and I only had to
Yes, I recommend this product
Fits like a glove
Helpful?
Yes · 0
No · 0
sacostello
Olympia, WA
★★★★★
★★★★★
March 14
Super High Quality
I replaced a Rogue SML-2 with the wall mounted rack to save space. The install took two people and was a little more complicated than expected. I kind of asked for it though, as mine is mounted around a push out window in a small office-type room. That said, on normal studs and and normal wall this would've been pretty simple. The finish of this rack (mine is red) is top-notch, as everything I've ever gotten from Rogue is. I couldn't be happier with this rack and am glad I bought it.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
Some Canuck
Vancouver bc Canada
★★★★★
★★★★★
March 3
Top notch piece of equipment
Loving my rack. Quality is awesome. Service was 10/10. Had some shipping damage and rogue took care of it. I recommend the product and the company
Yes, I recommend this product
Originally posted on roguecanada.ca
B Ron 3000
Seattle
★★★★★
★★★★★
February 27
Sturdy
Initially I was surprised by how tall it was, but after loading the bumper plates on the three levels it was clear why it was designed the way it was. The base does take up a lot of real estate, so if this is for your home gym you need to consider this. Personally, I placed the weight stand up against the wall and only load one side (this saves space and makes loading / unloading plates easier in my home gym. Even with just loading one side, the stand is sturdy and I have no concerns of it falling over. NOTE: 45 lbs plates are always loaded on the lowest level.
Yes, I recommend this product
Helpful?
Yes · 0
No · 2
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery