Daily Shipping Deals





Rogue P-6V Garage Pull-up System

P-6V Garage Pull-up System
P-6V Bracket Pair
Pull-up bar not included.
P-6V (4) Bracket Set
Includes (4) brackets, pull-up bar not included.
P-6V (6) Bracket Set
Includes (6) brackets, pull-up bar not included.
52" Pull-Up Bar

P-6V Garage Pull-Up System

The Ultimate Wall or Ceiling-Mounted Pull-Up Bar Solution

The Rogue P-6V is a variation on one of the industry’s strongest single-unit pull-up systems. In this design, we’ve aligned a 32” support arm at the center of a 31” 11-gauge steel mounting tube, with the pull-up bar slot positioned 30” from the mounting point. This makes the P-6V conducive to a wide range of ceiling-mounted set-ups, as well as any standard concrete wall mount.

Made in America, the P-6V Garage Pull-Up System has been weight tested at well over 500LBS and can be customized for small garage gyms and large-scale strength and conditioning facilities, alike. P-6V brackets can be purchased as part of a single system with an included 52” pull-up bar, or as a multi-pack for those interested in daisy-chaining a line of brackets to create multiple pull-up stations with a single bar.

See more of Rogue's line of single unit Pull-Up Systems.


  • Made in the USA
  • 1x2" 11-Gauge Steel
  • Pull-Up Bar Depth: 30” from mount
  • Width: Can be set on 16” stud centers or customized up to 48” between brackets
  • Length: Put brackets in a row for limitless options. A long 1” steel tube or 1.25” OD pipe from a tube supplier or hardware store can be run through a daisy-chained line of P-6 brackets.
  • Orientation: Vertical or Horizontal
  • Hardware not included

If properly installed, all Rogue Pull-Up Rig Assemblies are Guaranteed Against Failure.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Length 31"
Width 2"
Height 31"
Other Product Specs Weight Capacity: 500+LB Pull-up Bar Depth: 30"
Steel Notes 1x2" 11-Gauge Steel
Rogue P-6V Garage Pull-up System is rated 4.9 out of 5 by 67.
Rated 4 out of 5 by from I’d buy it again! Would have been 5 stars except for the fact I had to purchase my own lag screws. I wanted to set it up the minute I received it. But you need to drive to the hardware store for he parts not included.
Date published: 2021-05-16
Rated 5 out of 5 by from One of my favorite pieces of equipment Fantastic pull up bar, slightly hard to get level without a yard stick lol. Use this for pull/chin-ups and for my gymnastic rings. Buy this and some kettlebells and you're set.
Date published: 2021-05-04
Rated 5 out of 5 by from Better than expected Installed easy, I was up and pulling in 30min. Has a good solid feeling
Date published: 2021-03-24
Rated 5 out of 5 by from Great bar I cannot believe how stable this thing is. It doesn’t seem like it would be at 30” from the wall, but this thing is solid as a rock. Heavy equipment as well. You’re not going to break or bend this one.
Date published: 2021-03-05
Rated 5 out of 5 by from Exactly as Advertized! I bought this pull-up bar for my garage gym and it was exactly what I was looking for.....sturdy and easy to install.
Date published: 2021-01-25
Rated 4 out of 5 by from great gear i personally installed the pull up bar to a railing and not to a ceiling or a wall. the result was very good and this tool is really very practical and also nice to see. only suggestion: i think that bolts and screws should be supplied together given the price.
Date published: 2021-01-18
Rated 5 out of 5 by from Great all around product I got this bar just to do pull-ups like a year ago and they work great.
Date published: 2021-01-01
Rated 5 out of 5 by from Solid! I bought/installed the P-6V about one month ago in my garage which has celling height of 15 feet. As I was concerned about driving the lug nut screws into the celling beams I used an adjacent 2x6 to host the screws and connected it to the beams. Did this for a couple reasons: (1) in case the wood split while drilling and screwing in the screws I could just start with a new 2x6 and would not f* my celling beams - I can replace the 2x6 easily, but not the celling beam; and (2) the boring holes I placed in the celling beam are small enough to not negatively effect the wood stability. For what it matters - I'm 6'3'' and 185lbs The one recommendation is that I feel the screws, washers for installing should be provided. If you want to charge the extra $ for it that's fine. It just seems odd that you have to go out and buy these separate.
Date published: 2020-12-14
  • y_2021, m_6, d_10, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_67
  • loc_en_US, sid_XX9935, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue