Rogue R-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.8
105 Reviews
Made in U.S.A.

Rogue R-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.8
105 Reviews
Made in U.S.A.
$505.00
Product Description

Space Saving Power Rack, Made in the USA

The goal with the R-3W was to develop a wall-mount unit that could be folded inward or outward for space efficiency, yet still offer the sturdiness of our standard Infinity Series racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull-up rig, or power rack, the feel is miles beyond lighter fold-back setups that use thinner steel.

Read More

Rogue R-3W Fold Back Wall Mount Rack

Space Saving Power Rack, Made in the USA

The goal with the R-3W was to develop a wall-mount unit that could be folded inward or outward for space efficiency, yet still offer the sturdiness of our standard Infinity Series racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull-up rig, or power rack, the feel is miles beyond lighter fold-back setups that use thinner steel.

The R-3W Fold Back Rack features a pair of 2x3" 11 gauge steel uprights, Westside hole spacing through the bench/rack pull zone, and 2"-on-center spacing above and below. It’s compatible with most Infinity Series accessories, and is available in two depths: 20.5" and 40.5". The system also comes standard with a quick-attach pull-up bar, a set of Infinity J-cups, 4 mounting brackets for installation, and 4 detent pins to lock the rack into either the open position (ready for use) or closed position (against the wall). A set of UHMW plastic caps are attached to the base of each upright to protect your floor and allow the sides of the rack to freely swing in and out.

Optional Fold Back Rack Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

ATTN: Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.

Gear Specs

Specifications

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 2x3" 11 gauge steel, 90.375" height
  • Inside Depth: Inside depth - 20.5" or 40.5"
    Stringer Not Included
  • (1) Set of Infinity J-Cups
  • (4) Mounting Brackets
  • (4) 5/8" x 5" Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 5/8" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Black Powder Coat Finish
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface

See Also: The 3x3" Monster Lite version of the Fold Back Rack

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Loading

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight140LB or 160LB
LengthFrom Wall - 24" or 44"
Width55" Overall (On wall)
47" Outside uprights
43" Inside upright
Height90.375"
Foot Print24" or 44" x 55" (On wall)
Steel Notes2x3" 11 gauge steel
Other Product SpecsInside depth - 20.5" or 40.5"
Stringer Not Included
Infinity CompatibleYes

KEY FEATURES OF THE RML-3W

Loading
1

Heavy Gauge American Steel & Hardware

The R-3W uses heavy-duty 2x3" 11 gauge steel uprights with 5/8" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The R-3W rack is compatible with most of our exclusive Infinity accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

Loading
2

Choice of Depth

The Fold Back Rack is available in two depths: 20.5" and 40.5". With the 20.5" depth unit, the sides of the rack will position flush against the wall whether your swing them inward (towards each other) or outward. With the 40.5" depth rack, the sides can still fold in or out, but if both are moved inward, there will be a slight overlap—so to open up max space, you’d want to fold either both sides outward or one inward and one outward. For most setups the 20.5" is the best choice. Choose 40.5" if you need more space in the rack for gymnastic movements.

Loading
3

Fit, Finish & Lifetime Warranty

Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The R-3W is guaranteed by Rogue for Life.

Loading
4

Space Efficiency

The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5” of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

Loading
5

Easy Installation + Optional Stringers

Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2” on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (3/8" x 2-1/2" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

STRINGER INSTALLATION

Play Video

Recommended Products

Reviews

Fittofightfire1972
Ocala, FL
★★★★★
★★★★★
October 18
Rogue Rocks!
When COVID hit and gums closed I bought this rack and various attachments. It was the best investment I’ve ever made for myself. Should’ve done this years ago! I don’t have to waste time driving to the gym, wait on machines, share germs with everyone, and no distractions. My setup doesn’t take up too much space in the garage either. Absolutely love my Rogue equipment and would highly recommend it to anyone!
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Workout Minimalist
Chicago
★★★★★
★★★★★
October 10
Foldable Wall Mount Squat Rack (Lite)
Excellent. Easy to assemble and looks fantastic accessories to compliment the clean look
Yes, I recommend this product
Helpful?
Yes · 0
No · 1
StrEnd worker
Appalachia
★★★★★
★★★★★
September 29
Best in market
Looked at several competitor's products and this is the best deal by 200$, even when you buy the steel stringers. It ends up sitting 22"+ off the wall and works well. The pull up bar is excellent, Rogue nailed this, it is perfect for a home conditioning station. Cancel your gym membership, saving one years worth of gym or 'CF box' fees can easily pay for a full gym setup at your home.
Yes, I recommend this product
Helpful?
Yes · 0
No · 1
Jack H
New Hampshire
★★★★★
★★★★★
September 23
Great Rack--Solid Approach
Solid rack and solid approach for training in limited space. Opted for deeper rack so that I can do nearly everything inside the rack. Limited overhead space required that I build the platform around the rack. No big deal, but it did require some "customization" of the standard 4x8' half-platform. I BP outside the rack with this approach, moving the bench up to the edge of the platform with no problem. Now, from a position of physics, I prefer to work the rack interior, knowing that any forces will push the rack "into" the wall. For lifts that I positively can't do inside the rack (OP, BP), there has been no issues or pulling the concrete anchor bolts from the wall.
Yes, I recommend this product
Platform details
Helpful?
Yes · 0
No · 2
Rich125
South Jersey
★★★★★
★★★★★
August 21
Rig review
Bought this beginning July and minus breaking the pull up bar in…. This is aces
Yes, I recommend this product
Helpful?
Yes · 2
No · 1
dlsurrette
Mississippi
★★★★★
★★★★★
August 10
Great Quality
I purchased this system four months ago. I’ve been very impressed with the quality and strength of the steel. Everything I’ve ordered exceeded my expectations
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
Connor P
DFW
★★★★★
★★★★★
July 27
Perfect Rack, Works as Shown
I am really impressed with everything from rogue, but specifically this rack. The quality is perfect. It’s super sturdy, installation took one afternoon and it’s just what you need. I was actually really surprised how sturdy the rack is. Even when doing pull-ups on the pull-ups bar, the rack does not move a millimeter, it does not squeak or jiggle, it’s just perfect still. Really just a great product and it’s so worth the money.
Yes, I recommend this product
Helpful?
Yes · 1
No · 1
D Jolivette
★★★★★
★★★★★
July 25
BEST INVESTMENT EVER
This is the best investment I have ever made for myself!! Don't have to wait at the gym that is overcrowded with people taking selfies. Multiple attachments to add on.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery