Rogue RM-6 Monster Rack 2.0

★★★★★
★★★★★
4.8
119 Reviews
Made in U.S.A.
Product Image

Rogue RM-6 Monster Rack 2.0

★★★★★
★★★★★
4.8
119 Reviews
Made in U.S.A.
$2,610.00

Rig Color (12)*Satin Black

Height*

Gear Specs

BrandRogue Fitness
Made In USAYes
Length76"
Width49"
Height90.375", 100.375", or 108.375"
Foot Print80" x 53"
Steel Notes3x3" 11 Gauge Steel
Monster CompatibleYes
Product Description

Rogue designed the fully customizable power racks of the Monster Series to meet the high demands of the top professional, collegiate, and high school athletic facilities in the world. We used bigger, 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. With Version 2.0, we’ve also rolled out a number of new features, including a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.

Read More

Rogue RM-6 Monster Rack 2.0

Rogue designed the fully customizable power racks of the Monster Series to meet the high demands of the top professional, collegiate, and high school athletic facilities in the world. We used bigger, 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. With Version 2.0, we’ve also rolled out a number of new features, including a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.

The RM-6 Monster Rack offer more depth and storage than any other Monster power rack, with 8 plate storage posts and 4 band pegs included standard. The rack is available in three height options (90”, 100”, 108”); comes with all required 1" hardware; and ships standard with (2) Rogue Monster 1.5" Wrenches . Any other attachments and accessories pictured are NOT included. You can explore many of our compatible Monster Rack attachments on this page and add selections to your order (at a listed additional cost) via the convenient dropdown menu..

Updates on Color Options: The new Monster Rack 2.0 units include a dozen different custom color coating options, most of them in a medium gloss powder coat (the Satin Clear finish is a transparent finish, meaning any blemishes or marks from the manufacturing process will still be visible in the steel). 

Notes on Front Crossmember: While a front pull-up bar is the standard on this rack, some users elect to connect the front uprights with one of our 43" Monster Top Beams, instead. This 3x3" crossmember adds some extra stability and attachment versatility to the unit, and by moving the pull-up bar to the middle of the rack, it can allow for a few extra inches of height on pull-ups, as well.

Notes on Stainless Steel :  Please be aware that these are raw steel parts and will have minor imperfections from laser cutting and welding.

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Monster Series vs. Infinity Series

UPRIGHT HEIGHT

90"
Allows a 43" Single Pull-Up Bar to be mounted at a max height of 84" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Available at a slightly reduced price from standard 100" unit.

100" (Standard)
The Monster's default height selection. Allows a 43" Single Pull-Up Bar to be mounted at a max height of 94" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack.

108"
Allows a 43" Single Pull-Up Bar to be mounted at a max height of 102" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Priced slightly higher than standard 100" unit.

All Monster uprights are made from 3x3" 11 Gauge Steel and include 1" holes spaced 2" on center.

Colors

AVAILABLE IN 11 CUSTOM COLORS + STAINLESS STEEL OR CERAKOTE:

Bright Blue, Bright Green, Burnt Orange, Dark Blue, Dark Red, Gun Metal, Light Gray, Rogue Red, White, Satin Clear, Satin Black (Standard)

All color options come in a durable, medium gloss powder coat. Stainless Steel features a 180 Grit polished finish.

Stainless Steel : Please note that these are raw steel parts and will have minor imperfections from laser cutting and welding.

Hardware

2 HARDWARE FINISHES

Choose between Proprietary Matte Black or Bright Zinc.

Crossmembers

XM-431 Monster 43” Single Pull-Up Bar

Our standard, default selection for the front of the rack, this single 1.25" diameter pull-up bar includes 9" endplates and , along with a textured black powder coat finish.

XM-43N Monster 43” Crossmember w/ Nameplate

Features a Satin Black base crossmember with laser cut "ROGUE" panels on each side. Red is the default panel color, but if a customer selects a custom color, the panel will change to match it.

XM-433 Monster Fat/Skinny Pull-Up Bar

Includes (1) 1.25" pull-up bar and (1) 2" fat grip pull-up bar built in to the same crossmember, spaced 9.5" on center. The large endplate is 17" overall, and mounting holes are 14" on center. Finish is our standard textured black powder coat.

XM-432 Monster 43” Single Fat Bar

A wider, 2" diameter version of the standard Single Pull-Up Bar, this option also includes 9" end plates with and our textured black powder coat finish.

XM-43P Monster 43” Beam w/ Gusset

A new Monster crossmember designed with 2 gussets for added strength and a flush mount with the top of the uprights. Includes laser-cut "R" logos on each gusset and a Satin Black powder coat finish across the beam. Does NOT function as a pull-up bar.

43" Monster Socket Pull-Up Bars

Single bar available in a wide range of custom Cerakote color finishes with optional barbell-style knurling. Ships standard with (2) MG Black mounting sockets and (4) Bright Zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. The bar itself is 1.125" in diameter, and all Cerakote-coated versions include the Rogue logo in the center.

43" Monster Socket Pull-Up Curl Bar

Made from 28.5MM cambered steel with extended knurling and Black E-Coat finish. Ships standard with (2) MG Black mounting sockets and (4) bright zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. Design enables close-grip and wide-grip pull-ups.

J-Cups

Monster Standard J-Cup Pair

Monster Standard J-Cup Pair

Our default J-Cup selection. Features UHMW plastic within the cup itself to protect the bar's knurling, as well on the backside and the clasp to protect uprights from scratching/chipping. 1000LB rating. 

Rackable Depth: 2.75"

Monster 1" Sandwich J-Cup Pair

Monster 1" Sandwich J-Cup Pair

The Monster Sandwich J-cup has a UHMW plastic core which offers full protection against your barbell knurling. It also has UHMW plastic on the backside to protect the rack from chipping. 1000LB rating. 

Rackable Depth: 2.5"

Monster 2" Sandwich J-Cup Pair

Monster 2" Sandwich J-Cup Pair

The side plates fit into a recessed, machined plastic core (2" wide) to prevent metal-to-metal contact. The hardware (that connects the plastic to the side plates) is also recessed, preventing the bar or a user’s hand from scraping against them. Welds are inside the side plates for a clean edge, and UHMW plastic is featured on the clasp and back plate to prevent damage to the uprights. A thin piece of rubber on the side of the clasp also softens contact between the clasp and upright when the J-Cup is swung into place. 1000LB rating. 

Rackable Depth: 2.5"

Ghost Roller J-Cup 2.0

Ghost Roller J-Cup 2.0

The Ghost Return Roller J-Cup 2.0 can comfortably accommodate barbell shafts ranging from 1” (25 MM) to 2” (50 MM) in diameter. The compact design makes it less likely that an athlete will make accidental contact with the J-cups when benching or squatting, and the roller feature enables much safer and easier centering of the barbell prior to lift off.

Rackable Depth: 2.875"

Safeties

Monster Pin & Pipe Safety Set

Our default safety selection. Standard pair. Pin: 1" diameter, zinc coating.Pipe: 1.5" diameter, schedule 80 pipe, black powder coat. Depths are 24", 30" and 43".

Monster Strap Safety System 2.0

3" wide reinforced nylon straps designed to prevent damage to barbell knurling on any missed lift, or to roll the bar safely away from the user on a drop. Rated for 10,000LB. Notched pin design securely locks the system into place and allows for easy, quick adjustments. Depths are 24", 30" and 43".

Monster 43” Flip Down Safety

Compatible ONLY with the 43" depth RM-4 and RM-6 racks. Features UHMW plastic to proctect both the knurl of the barbell and the uprights of the rack. Finish is medium gloss black powder coat. Made from 3x3" 11 Gauge Steel.

All required 1” hardware, a set of 4 band pegs, and 8 plate storage posts are included standard with all orders.

See More: Monster Series Power Racks

Loading

EXPLORE MONSTER ATTACHMENTS

Recommended Products

Reviews

1 - 8 of 119 Reviews
Andrew Par
VA
★★★★★
★★★★★
1 week ago
Top Quality
HD solid system! I am big and the rack stays put when I do pullups.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Keg17
FL
★★★★★
★★★★★
Nov 2023
Beast
I have been looking at, thinking about, and saving for a rack for awhile. I have used my friends monster lite rack in the past and I think that the monster lite line is solid, but I went with monster primarily so I could choose the height, though the added hardware size is a positive for sure. 100 is perfect because it allows me (6'2") to do dead hangs and pull ups without having to bend my knees. I considered going with the monster halfrack but ultimately decided the rm6 was the way to go for various reasons (it surprisingly doesnt really take up that much more room than the halfrack, but it is large). My order shipped quickly and everything was in good condition when it arrived. I was missing 2 bolts, but customer service had replacements being shipped to me before I finished setting up the rack. They arrived in about 2 days. I had read that some people claimed to have set it up by themselves and I'm not saying it's impossible, but I'm highly skeptical. Doable with 1 other person, much easier if you had 2. This thing is a beast! I appreciate the added stability and storage provided by the additional set of legs. It is sufficiently large enough that my wife and I can do bench and squats at the same time. It does sway a little bit went I do dips off the side of the rack, but it's not going anywhere. I will probably get an extra 43 beam to tie the back legs together at the top just for added rigidity, although I dont think it's absolutely necessary. I went with the regular j cups and the strap safeties. I like the strap safeties a lot, once you stretch the straps a little bit they are really easy to move up and down and solid enough to hold a lot of weight without damaging your bar. If you have the money and the floor space, this is an awesome rack.
Yes, I recommend this product
Helpful?
Yes · 3
No · 0
Stooks
Cleveland,OH
★★★★★
★★★★★
Oct 2023
Truly a monster
Had this rack 2 years, still works and looks amazing. Built like a tank and the attachments are all solid. I love the space available inside the rack and the 6 post is a definite upgrade if you have the space. Highly recommended.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
awe gfw
★★★★★
★★★★★
Jul 2023
Serious cage
Sturdy cage, with a few nitpicky comments: 1) some of the bolts came heavily oxidized 2) my garage floor is not flat (old concrete). this prevents the middle two supports from touching the ground, even after loosening everything with the cage in place. Would be nice if the cage could account for this, as im sure there are others in this situation 3) i really miss the ease of the "slots" in the legend cages that let you slide the safeties in and out effortlessly. i underestimated how cumbersome the standard holes are to use
Helpful?
Yes · 1
No · 3

Response from Rogue Fitness:

Jul 2023
We're sorry to hear your bolts arrived with oxidation. Our team has reached out to investigate what went wrong here and offer a resolution.
S2k_Walt
San Antonio, TX
★★★★★
★★★★★
Jul 2023
Perfect Rack - Must Have!
Amazing rack! Solid and very sturdy! The great thing about this rack is that you can customize it to your specific needs and continue to add as many attachments as needed for your specific needs. Some tips on putting it together. Have a helper! If you can get an impact wrench then your life will be much easier. The included wrenches help but it’s much easier to assemble with 1 1/2” sockets. Build each side on the ground and then stand it up and mount the pull up bar first and then the center name plate. You won’t be disappointed with this rack!
Yes, I recommend this product
Monster RM6
Helpful?
Yes · 6
No · 0
Vancouver Canada
★★★★★
★★★★★
Apr 2023
Great quality! Superb customer service!
Needless to say that rogue products are well built. What amazed me was the customer service, buy anything from them and they have got you covered.
Yes, I recommend this product
Originally posted on roguecanada.ca
Las vegas,nv
★★★★★
★★★★★
Apr 2023
Rogue Monster Rack is GORGEOUS!!!!
This rack is so solid, so good looking, spacious, etc. I know it’s pricey but quality is there. So many attachments to choose from. I definitely purchased something that will last forever!
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Willie P
El Dorado Hills, Ca.
★★★★★
★★★★★
Apr 2023
Awesome setup
I purchased an RM-6 six post Monster rack with a rear high and low cross member, an SLM6 weight stack slinger, a rack mount lat pull down seat with a low row kit, monster landline 2.0, matador, 2” J-Cups and Monster Safety Spotter Arms 2.0. I was a little concerned watching you tube videos with 2-3 people putting this rack together but at age 74 I am happy to report I completely assembled everything by myself and it is tight and work’s incredibly. With my kettles, dumbbells, Olympic bars, bumpers, Concept 2 rower Rogue belt squat Rhino, Assault bike and rings I feel I can safely do anything that I could do in a gym. I am very happy with this purchase. With everything listed above I may have been short 2 washers (maybe not, may have misplaced) so h have got to give props to those who pick and package these shipments.
Yes, I recommend this product
Helpful?
Yes · 6
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery