Online orders and operations are active. Retail store is closed. | Covid-19 Status
Daily Shipping Deals





Special Price $1,300.00

Regular Price: $1,300.00

* Required Options

RM-4 Power Rack Configurations

Accessories + Add Ons
Monster Rack 2.0 Stabilizer Kit

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Length 49"
Width 49"
Height 90", 100", or 108"
Steel Notes 3x3" 11 Gauge Steel
Foot Print 53" x 53"
Monster Compatible Yes

Rogue RM-4 Monster Rack 2.0

Rogue designed the fully customizable power racks of the Monster Series to meet the high demands of the top professional, collegiate, and high school athletic facilities in the world. We used bigger, 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. With Version 2.0, we’ve also rolled out a number of new features, including a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.

The 43" depth RM-4 Monster Rack is available in three height options (90”, 100”, 108”); comes with all required 1" hardware and 4 band pegs; and ships standard with (2) Rogue Monster 1.5" Wrenches. Any other attachments and accessories pictured are NOT included. You can explore many of our compatible Monster Rack attachments on this page and add selections to your order (at a listed additional cost) via the convenient dropdown menu.

Updates on Color Options: The new Monster Rack 2.0 units include a dozen different custom color coating options, most of them in a medium gloss powder coat (the Satin Clear finish is a transparent finish, meaning any blemishes or marks from the manufacturing process will still be visible in the steel). Customers can also choose our new Black Cerakote finish; an ultra-durable, ceramic-based coating first popularized in the firearm industry. Prior to receiving a Cerakote finish, all parts of the rack are sandblasted to remove any dirt and contaminants for a better coating adhesion.

Notes on Front Crossmember: While a front pull-up bar is the standard on this rack, some users elect to connect the front uprights with one of our 43" Monster Top Beams, instead. This 3x3" crossmember adds some extra stability and attachment versatility to the unit, and by moving the pull-up bar to the middle of the rack, it can allow for a few extra inches of height on pull-ups, as well.

Notes on Stainless Steel : Please be aware that these are raw steel parts and will have minor imperfections from laser cutting and welding.

Important: Unit must be bolted to floor unless stabilizer is added. Mounting Hardware Not Included

Check out ALL of the custom options available on the 43" depth RM-4 Monster Rack below.

Explore the Monster Rack Attachments.

Monster Series vs. Infinity Series


Explore Attachments


Available in:

Allows a 43" Single Pull-Up Bar to be mounted at a max height of 84" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Available at a slightly reduced price from standard 100" unit.

100" (Standard)
The Monster's default height selection. Allows a 43" Single Pull-Up Bar to be mounted at a max height of 94" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack.

Allows a 43" Single Pull-Up Bar to be mounted at a max height of 102" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Priced slightly higher than standard 100" unit.

All Monster uprights are made from 3x3" 11 Gauge Steel and include 1" holes spaced 2" on center.


Available in 11 custom colors + Stainless Steel or Cerakote:

Bright Blue, Bright Green, Burnt Orange, Dark Blue, Dark Red, Gun Metal, Light Gray, Rogue Red, White, Satin Clear, Satin Black (Standard)

All color options come in a durable, medium gloss powder coat.
Stainless Steel features a 180 Grit polished finish.

Stainless Steel : Please note that these are raw steel parts and will have minor imperfections from laser cutting and welding.

Cerakote : This advanced ceramic-based coating, was originally established in the gun industry for its remarkable durability in thin applications.


2 Hardware Finishes

Choose between Black Zinc or Bright Zinc.


XM-431 Monster 43” Single Pull-Up Bar

Our standard, default selection for the front of the rack, this single 1.25" diameter pull-up bar includes 9" endplates and mounting holes 6" on center, along with a textured black powder coat finish.

XM-433 Monster Fat/Skinny Pull-Up Bar

Includes (1) 1.25" pull-up bar and (1) 2" fat grip pull-up bar built in to the same crossmember, spaced 9.5" on center. The large endplate is 17" overall, and mounting holes are 14" on center. Finish is our standard textured black powder coat.

XM-43N Monster 43” Crossmember w/ Nameplate

Features a Satin Black base crossmember with laser cut "ROGUE" panels on each side. Red is the default panel color, but if a customer selects a custom color, the panel will change to match it.

XM-432 Monster 43” Single Fat Bar

A wider, 2" diameter version of the standard Single Pull-Up Bar, this option also includes 9" end plates with mounting holes 6" on center and our textured black powder coat finish.

XM-43P Monster 43” Beam w/ Gusset

A new Monster crossmember designed with 2 gussets for added strength and a flush mount with the top of the uprights. Includes laser-cut "R" logos on each gusset and a Satin Black powder coat finish across the beam. Does NOT function as a pull-up bar.

43" Monster Socket Pull-Up Bars

Single bar available in a wide range of custom Cerakote color finishes with optional barbell-style knurling. Ships standard with (2) MG Black mounting sockets and (4) Bright Zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. The bar itself is 1.125" in diameter, and all Cerakote-coated versions include the Rogue logo in the center.

43" Monster Socket Pull-Up Curl Bar

Made from 28.5MM cambered steel with extended knurling and Black E-Coat finish. Ships standard with (2) MG Black mounting sockets and (4) bright zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. Design enables close-grip and wide-grip pull-ups.


Standard Monster J-Cup Pair

Our default J-Cup selection. Features UHMW plastic within the cup itself to protect the bar's knurling, as well on the backside and the clasp to protect uprights from scratching/chipping. 1000LB rating. Rackable Depth of 2 3/4"

Sandwich Monster J-Cup Pair

The Monster Sandwich J-cup has a UHMW plastic core which offers full protection against your barbell knurling. It also has UHMW plastic on the backside to protect the rack from chipping. 1000LB rating. Rackable Depth of 2 1/2"

2" Sandwich Monster J-Cup Pair

The side plates fit into a recessed, machined plastic core (2" wide) to prevent metal-to-metal contact. The hardware (that connects the plastic to the side plates) is also recessed, preventing the bar or a user’s hand from scraping against them. Welds are inside the side plates for a clean edge, and UHMW plastic is featured on the clasp and back plate to prevent damage to the uprights. A thin piece of rubber on the side of the clasp also softens contact between the clasp and upright when the J-Cup is swung into place. 1000LB rating. Rackable Depth of 2 1/2"


Monster Pin & Pipe Safety Set

Our default safety selection. Standard pair. Pin: 1" diameter, zinc coating. Pipe: 1.5” diameter, schedule 80 pipe, black powder coat. Depths are 24", 30" and 43".

Monster Strap Safety System 2.0

3" wide reinforced nylon straps designed to prevent damage to barbell knurling on any missed lift, or to roll the bar safely away from the user on a drop. Rated for 10,000LB. Notched pin design securely locks the system into place and allows for easy, quick adjustments. Depths are 24", 30" and 43".

Monster 43” Flip Down Safety

Compatible ONLY with the 43" depth RM-4 and RM-6 racks. Features UHMW plastic to proctect both the knurl of the barbell and the uprights of the rack. Finish is medium gloss black powder coat. Made from 3x3" 11 Gauge Steel.

All required 1" hardware and a set of 4 band pegs are also included standard with all orders.

See More: Monster Series Power Racks

Rogue RM-4 Monster Rack 2.0 is rated 4.9 out of 5 by 82.
Rated 4 out of 5 by from Love the quality Was real excited to get my rogue rack and bench, have always wanted to get a garage gym going. Little disappointed tho, after a 2 month wait and 1700 dollars when i recieved my order one of the safety straps was missing. Its been a couple weeks and still no strap. Also, one of the uprights has some imperfections in the powder coat. The rogue 2.0 bench i ordered later and when i got it i can tell the leg warped when welded, doesnt sit flat on the floor. Will definitely order from you again, just little things like that bother me when i spend that much money
Date published: 2020-09-07
Rated 5 out of 5 by from Awesome rack The cage rack is solid, metal is thick and massive , when I’m doing pull ups it’s very stable , not shaken .The attachments is unlimited, u can be creative with that ... I love it ..
Date published: 2020-09-05
Rated 5 out of 5 by from Well built sturdy beast of a Rack I was looking for a cage that had many options for my weight lifting needs. I work out alone in my basement gym so safety was a big deal for me. I use it for bench press (incline, flat and decline), squats, pull ups, dips, rows, and yes curls. I love the options for attachments which I use often. As far as bench is concerned I find no problem with the hole spacing. I know many consider other options because they think the monster is not good for bench press. For me I think the spacing is perfect. I’m 5’10 and was also concerned for the pull ups on the basic 90 height which also turned out to be perfect. The paint is amazing. Great color and the rack came in a busted package but not one scratch on it. It was easy to put together and much stronger than I imagined. I added plate holders And weights which helped weigh down the bench. It is not bolted down which is fine for me. Still a very sturdy rack.
Date published: 2020-08-31
Rated 5 out of 5 by from Love the Rack Rogue was able to deliver within 4 weeks during difficult time and service very responsive when UPS lost bolts during shipment. The Rack is incredibly solid, high quality and cannot wait to add some accessories when they come back in stock
Date published: 2020-08-26
Rated 4 out of 5 by from Was Nervous Ordering This Awesome Power Rack Tough Quality I'm Only Giving This 4 Stars Because As I Was Building This With My Brother We Noticed It Was Missing Bolts Everything Else Was There Which I Was Relived But I Emailed The Company & 3 Days Later More Bolts Came In FREE Of Charge The Best Power Rack Thank You Rogue
Date published: 2020-08-24
Rated 4 out of 5 by from 5 star Rack, 2 star shipping Rogue review Shipping: Lots of drama getting this awesome RM-4 power rack. I decided at the end of March I was going to order this. COVID happened I get stuff happens. Was finally able to order this rack at the end of April. The shipment arrived in multiple boxes. Unfortunately, the bolt package was shipped, damaged and returned to Rogue by UPS before I saw it. The legs arrived but one of the boxes was badly damaged and somehow 1 of 2 legs fell out of the box before it arrived. Seriously. After multiple emails, including one to the CEO, phone calls, 4 failed/damaged Rogue shipments, about 60 days, a DIY rack leg, parts from Home Depot, I had a working rack. After about 80-90 days, I got the missing leg and bolts from Rogue and finally had my order completed. None of the bolts were packaged well at all and scratched like crazy upon arrival, but whatever man. I’m not going to fret over that, even though I know some people understandably would. Rack: I’m 5’9” and I don’t like doing pull-ups with my feet hitting the ground. I could fit a 100” rack in my garage but barley. I went the the 90” and mounted the pull-up bar on the top beams, not the front ones. It’s a perfect height. I can now do pull-ups even with a weighted belt. I jump high enough to catch the bar easily, despite the added weight, and my feet are clear of the floor. I got the fat-skinny bar, which was delivered a bit warped, and it adds a bit more rigidity to the rack given its mounting position. It’s been awesome. In three weeks, I went from 16 pull-ups to 26 pull-ups. That far bar helps with grip strength. I’m still using my DIY bench and recently started the “Starting Strength” program. I’m over 50 yo, and deadlifted 295 today, a personal best. If I were to do it again the RM-3 could probably meet my needs equally as well with less money. The weightlifting platform is 8x8 so it’s going to take up the same amount of space in my garage regardless of rack size. With the smaller rack, I’d have more space for deadlifting but it hasn’t been an issue at all.
Date published: 2020-08-24
Rated 5 out of 5 by from Worth the wait Perfect size for my garage home system with an addition of a cable pull system and a new Ohio bar I'm ready to rock...oh and not to forget my rogue flat bench.
Date published: 2020-08-22
Rated 5 out of 5 by from Looks Good! I ordered this in May and it arrived in August, unfortunately I am still on your waitlist for barbell and it can ONLY look good.
Date published: 2020-08-22
  • y_2020, m_9, d_17, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_82
  • loc_en_US, sid_RM-4, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue