Gift CardsContact UsOrder Status
Live Chat

Monster Collegiate Half Racks

★★★★★
★★★★★
5
13 Reviews
Made in U.S.A.
Product Image

Monster Collegiate Half Racks

★★★★★
★★★★★
5
13 Reviews
Made in U.S.A.
Monster Half Racks
$1,600.00
Ships in 7-10 Days

Rack Style (2)*Monster Half Rack

Monster Collegiate Half Racks Accessories
Available Options (1)

Monster Safety Spotter Arms 2.0
Monster Safety Spotter Arms 2.0See Details
$295.00

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Length30" (total rack depth, not including front foot)
Width49"
Height100.375"
Foot Print62" deep x 53" wide
Steel Notes3x3" 11 Gauge Steel
Other Product SpecsRack Inside Depth - 24"
Monster CompatibleYes
Product Description

Built with 90" uprights at the back of the unit and 100" uprights in the front, the Rogue Monster Collegiate Half Rack utilizes new angled crossmembers to produce a finished look at the top of the rack with added height in front for pull-ups. We’ve also included longer 30" front feet, which provide additional stabilization and allow athletes to perform band work without having to be inside the rack itself.

Read More

MONSTER COLLEGIATE HALF RACKS

Built with 90" uprights at the back of the unit and 100" uprights in the front, the Rogue Monster Collegiate Half Rack utilizes new angled crossmembers to produce a finished look at the top of the rack with added height in front for pull-ups. We’ve also included longer 30" front feet, which provide additional stabilization and allow athletes to perform band work without having to be inside the rack itself.

The Monster Half Rack features the same 3x3" 11 Gauge Steel construction and 1” hardware as our standard Monster power racks, and it’s available here in two formats, each designed with the space efficiency needs of a high school or college training facility in mind.

Single Monster Half Rack: Compact unit for individual athlete use. 24" inside depth. 62" x 53" footprint. Includes (1) optional pull-up bar, (4) band pegs, (8) plate storage posts, (1) laser-cut Rogue nameplate in red.

Double Monster Half Rack: 2-in-1 unit with connected, back-to-back Half Racks and storage in the middle. Allows two athletes to train at the same time. 24" inside depth on both sides. 117" x 53" total footprint. Includes (2) optional pull-up bars, (8) band pegs, (8) plate storage posts, (1) laser-cut Rogue nameplate in red.

Note: Crossmember and J-Cup selections apply to both sides of the unit when configuring the Double Half Rack.

Both versions of the Monster Collegiate Half Rack are made in the USA and finished in our MG Black Powdercoat. They’re also compatible with a wide range of Monster Series add-ons and accessories. From pull-up bar style to J-cup type, you can customize your Monster Half Rack by comparing the options below and making your selections from the dropdown order menu.

Gear Specs

Additional Specifications:

  • Manufactured in Columbus, Ohio
  • 3x3" 11 Gauge Steel, 1" hardware
  • Height: 100.375" front, 90" inside
  • Angled crossmembers connect 100" uprights to 90" uprights
  • 30" Extended Front Feet for greater stabilization, band work outside rack (each foot includes 8 laser-cut numbered holes, 1" in diameter)
  • 12" Plate Storage Posts w/ Plastic Covering
  • Zinc Plated Band Pegs
  • MG Black Powdercoat Finish
  • Laser-cut Rogue Nameplate(s) in Rogue Red Finish - NOT INTERCHANGEABLE
Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Monster Series vs. Infinity Series

MONSTER 43" SINGLE PULL-UP BAR:

Our standard, default selection for the front of the rack, this single 1.25" diameter pull-up bar includes 9" endplates and mounting holes 6" on center, along with a textured black powder coat finish.

MONSTER 43" SINGLE FAT BAR:

A wider, 2" diameter version of the standard Single Pull-Up Bar, this option also includes 9" end plates with mounting holes 6" on center and our textured black powder coat finish.

STAINLESS STEEL SOCKET PULL-UP BAR:

1.125" diameter bar with stainless finish and choice of smooth or knurled barbell-style grip. Mounting holes 6” on center.

SOCKET PULL-UP CURL BAR:

28.5MM diameter cambered bar with a Black E-Coat finish and extended knurling to close-grip portion of the bar. Mounting holes 6" on center.

MONSTER 43" BEAM W/ GUSSET:

A Monster crossmember designed with 2 gussets for added strength and a flush mount with the top of the 100" uprights. Does NOT function as a pull-up bar.

MONSTER 43" BEAM + CROWN PULL-UP BAR:

Mountable attachment includes bar grips and welded spheres (3" and 4" diameter) for wide, narrow, pronated, supinated, and neutral grip styles in one station.

J-Cups

Monster Standard J-Cup Pair

Monster Standard J-Cup Pair

Our default J-Cup selection. Features UHMW plastic within the cup itself to protect the bar's knurling, as well on the backside and the clasp to protect uprights from scratching/chipping. 1000LB rating. 

Rackable Depth: 2.75"

Monster 1" Sandwich J-Cup Pair

Monster 1" Sandwich J-Cup Pair

The Monster Sandwich J-cup has a UHMW plastic core which offers full protection against your barbell knurling. It also has UHMW plastic on the backside to protect the rack from chipping. 1000LB rating. 

Rackable Depth: 2.5"

Monster 2" Sandwich J-Cup Pair

Monster 2" Sandwich J-Cup Pair

The side plates fit into a recessed, machined plastic core (2" wide) to prevent metal-to-metal contact. The hardware (that connects the plastic to the side plates) is also recessed, preventing the bar or a user’s hand from scraping against them. Welds are inside the side plates for a clean edge, and UHMW plastic is featured on the clasp and back plate to prevent damage to the uprights. A thin piece of rubber on the side of the clasp also softens contact between the clasp and upright when the J-Cup is swung into place. 1000LB rating. 

Rackable Depth: 2.5"

Ghost Roller J-Cup 2.0

Ghost Roller J-Cup 2.0

The Ghost Return Roller J-Cup 2.0 can comfortably accommodate barbell shafts ranging from 1” (25 MM) to 2” (50 MM) in diameter. The compact design makes it less likely that an athlete will make accidental contact with the J-cups when benching or squatting, and the roller feature enables much safer and easier centering of the barbell prior to lift off.

Rackable Depth: 2.875"

Loading

EXPLORE MONSTER ATTACHMENTS

Recommended Products

Reviews

1 - 8 of 13 Reviews
ExtremeSpeed
Phoenix, AZ
★★★★★
★★★★★
May 2023
Extremely Happy
A month and a half ago we elected to utilize RogueFitness over several other brands when expanding our speed training facility. We chose the Monster Collegiate Half Racks because our strength training space was limited, we could not be happier. The Half Racks have been every bit as effective as the power racks we've had in the past. The Monster Lite Competition Bench is another high-quality piece of equipment that handles the vast array of athletes we train with no limitations.
Yes, I recommend this product
Monster Collegiate Half Racks and Monster Lite Competition Bench
Helpful?
Yes · 2
No · 0
Stldc
St Louis
★★★★★
★★★★★
Nov 2022
Literally Perfect
I wanted 8 squat stations for my gym but didn’t want a 40’ rig. This is absolutely perfect. We’re able to fit all 8 stations within a 20x20 box. It’s solid, overbuilt, the color is perfect.
Yes, I recommend this product
Double Half Rack
Two linked together.
Helpful?
Yes · 4
No · 0
vnguyen_md
maryland
★★★★★
★★★★★
Jun 2021
The best rack!
This rack can be ordered without the angled crossmembers. My ceiling in the basement isn't all that high so I had both pairs of uprights shipped as 90" tall. Rogue was happy to comply with my request and everything shipped within a few days (despite saying 30-60 days)
Yes, I recommend this product
The best rack!
Helpful?
Yes · 30
No · 0
Ty from Canada
Edmonton, Alberta
★★★★★
★★★★★
May 2021
Fantastic Setup for (my) Basement Gym
Be sure your ceiling height exceeds 100" before buying but know that you can adjust the position of the pull up bar along the front posts to suit your needs (I set my bar at 87" and it works perfect for me). If deciding between the Monster and the Monster Lite half racks, the cost of the attachments should factor into your decision since the former kitted out will cost you a lot more than the latter. Also look elsewhere if you want to work inside the rack (unless you choose not to install the weight horns) as there isn't enough space (24") with the weight horns in place. Consider ordering the shims at the time of purchase. You may need them even if you think your floor is level (though any shim will work). For us Canadian buyers, you will save a lot of money on shipping if you purchase everything at once. I own several Rogue products and have never been disappointed.
Yes, I recommend this product
Originally posted on roguecanada.ca
CLRF24
Nashville, TN
★★★★★
★★★★★
May 2021
Fantastic Addition!
Couldn’t be more happy with this purchase! Love the quality and space efficiency. Built a 10x16’ shed in the backyard for a home gym and it’s the perfect solution to maximize the space. Neighbors are jealous so it’s a win!
Helpful?
Yes · 4
No · 0
Garage Gym Guru
★★★★★
★★★★★
Feb 2021
Best decision I made for the gym
Check out my full review at Garage Gym Guru on YouTube. Smaller footprint and still fully functional for what I need. Everything done in the rack can be done outside the rack. Looks great.
Yes, I recommend this product
Helpful?
Yes · 8
No · 1
RDS37
Orlando, FL
★★★★★
★★★★★
Apr 2020
Solid setup for smaller spaces
Had a small space, and wanted weight storage on the rack. Ordered a custom setup with flat top crossmember by calling Rogue. Very easy customization. Love how solid it is, and the 1 inch bolts look awesome. Setup includes safety spotter arms, and its a great solution. Front legs give me peace of mind when working alone that it won’t tip forward when working outside the rack. My old gym had Monster Lite equipment, and I’m very impressed with how much more substantial Monster series is. Really glad I went with Monster vs Monster Lite.
Yes, I recommend this product
Helpful?
Yes · 20
No · 2
aoichan0926
Miyazaki Japan
★★★★★
★★★★★
Jan 2020
Very cool!
It works well not only as a half rack but also as a power rack I think it is a simple but robust and sophisticated design. Especially the angled crossmembers and angled feet are my favorite parts The rogue team was willing to respond to order changes and custom heights. It arrived safely in Japan! And it fits perfectly in my garage! Thanks to rogue products and staff! !
Helpful?
Yes · 9
No · 2
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery