|Made In USA||Yes|
|Product Weight||165LB (Including Stringers & pull-up bar)|
|Length||14" (depth from mounting surface)|
|Width||49" Outside Uprights 43" Inside Uprights|
|Steel Notes||3x3" 11 gauge steel|
|Monster Lite Compatible||Yes|
The Rogue 90” Slim Rack combines a simple, efficient set-up with the reliable stability of two wall-mounted Monster Lite uprights (3x3” 11-gauge steel).
The Rogue 90” Slim Rack combines a simple, efficient set-up with the reliable stability of two wall-mounted Monster Lite uprights (3x3” 11-gauge steel). For a door-mounted version of this design, see our RML-90SLIM Door Mount Fold Back Rack.
All versions of this squat stand are manufactured in the USA and include Westside hole spacing (1” through bench and clean pull zone, 2” spacing above and below), a texture black finish, a pair of Monster Lite J-cups, and UHMW plastic feet to protect your flooring. Customers can also custom-select several key components of the unit’s set-up, including the type of mount (bracket vs. crossmember) and whether to include Rogue Stringers and/or a 43” Single Pull-Up Bar.
Well suited to most garage gyms / home gyms, the compact RML-90SLIM is 90.375” tall and creates a minimal footprint, with the front face of the uprights extending just 15” from the wall in the crossmember mount option.
Please Note: Installation is recommended only for secure concrete walls or wood studs, and the additional support of stringers (whether you use Rogue Stringers or your own) may be needed. It is the buyer’s responsibility to install the Slim Rack in a location with hardware capable of supporting the aggregate weight of the rack and all gear mounted or stored on it, as well as any person using it.
Once installed, the Slim Rack will also be compatible with a wide range of Monster Lite Series attachments, sold separately.
Note on Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.
See More: Rogue Power Racks
The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.
Featuring a pair of 90” Monster Lite uprights, the wall-mounted RML-90SLIM Rack is budget-friendly and a great way to get the benefits of an M-Lite squat stand with the absolute minimum footprint in your gym. In the crossmember-mount option, the front face of the uprights extend just 15” from the wall, leaving more room for other equipment and other athletes in a cramped training space.
Made in the USA, the RML-90SLIM Rack features (2) 3x3” 11-gauge steel Monster Lite uprights with laser-cut numbering, Westside hole spacing, and protective UHMW feet (true overall height of the unit, with the feet, is 90.375”). Both the crossmember and bracket configurations come standard with a set of standard Monster Lite J-Cups, all required mounting hardware, and a texture black powdercoat finish. Customers can add a Rogue 43” Single Pull-Up to their order in the purchase area.
This unit can be ordered with your choice of either (a) 4 mounting brackets or (b) 4 steel crossmember attachments. The crossmember option is designed to mount to the Monster Lite uprights on one side and a stringer on the other, which creates more potential for adding extra Monster Lite attachments such as the Monster Lite Rack Mount Single Bar Holder, Vertical Bar Hanger, or Plate Storage Post. Please note that the crossmember mount also involves an added cost compared to the standard bracket mount (see purchase area for details).
Even if you opt for the bracket set-up, we still recommend adding a pair of our 11-gauge steel stringers to your order for maximum stability. These stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). All required hardware (16-3/8" x 2-1/2" black wood lags and washers) is included with the stringers, but any customers attempting to mount to a wall construction other than wood stud will be responsible for acquiring the correct hardware.