Daily Shipping Deals

BUY 3 OR MORE 3 SHIPS FREE ITEMS AND THEY SHIP FOR FREE Shop Now

FREE SHIPPING ON SELECT ITEMS Shop Now

BUY A RIG* AND YOUR ENTIRE ORDER SHIPS FREE See Details

ORDERS OF $5K SHIP FREE See Details

Rogue RML-3W Fold Back Wall Mount Rack

Rogue RML-3W Fold Back Wall Mount Rack

New RML-3WC Custom Color Rack
Rogue RML-3W Fold Back Wall Mount Rack
$495.00

Gear Specs

Brand Rogue Fitness
Product Weight 163LB or 190LB
Length From Wall - 24.75" or 43.75"
Width 56.1875" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height 90.375"
Foot Print 24.75" or 43.75" x 56.1875"(On Wall)
Steel Notes 3x3" 11 gauge steel
Other Product Specs Inside depth - 21.5" or 41.5"
Stringer Not Included
Made In USA Yes
Monster Lite Compatible Yes

ROGUE RML-3W FOLD BACK WALL MOUNT RACK

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

A Rogue original Fold Back Rack is built with two 3x3" 11 gauge steel uprights, laser cut in Columbus, Ohio, with Westside hole spacing through the bench/pull area, and 2"-on-center spacing above and below. All steel is powder coated in the Rogue factory for a durable finish.

Optional Fold Back Rack Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10.125" tall, and extend 0.8125" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

Additional Specifications:

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 3x3" 11 gauge steel, 90.375" height
  • Inside Depth: Inside depth - 21.5" or 41.5"
    Stringer Not Included
  • (1) Set of Monster Lite J-Cups
  • (4) Mounting Brackets
  • (4) 0.625" x 5" Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 0.625" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10.125" tall, 0.8125" extension off the mounting surface

See More: Rogue Power Racks

Gear Specs

Brand Rogue Fitness
Product Weight 163LB or 190LB
Length From Wall - 24.75" or 43.75"
Width 56.1875" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height 90.375"
Foot Print 24.75" or 43.75" x 56.1875"(On Wall)
Steel Notes 3x3" 11 gauge steel
Other Product Specs Inside depth - 21.5" or 41.5"
Stringer Not Included
Made In USA Yes
Monster Lite Compatible Yes

Key Features of the RML-3W

  • 1Heavy Gauge American Steel & Hardware

    The RML-3W uses heavy-duty 3x3" 11 gauge steel uprights with 0.625" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The RML-3W rack is compatible with most of our exclusive ML accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

  • 2Choice of Depth

    The Fold Back Rack is available in two depths: 21.5" and 41.5". In the 21.5" version, the sides of the rack will position flush against the wall whether you swing them inward (towards each other) or outward. With the 41.5" depth rack, the sides can still fold in or out, but if both are moved inward, there will be a slight overlap—so to open up max space, you'd want to fold either both sides outward or one inward and one outward. For most setups the 21.5" is the best choice. Choose 41.5" if you need more space in the rack for gymnastic movements.

  • 3Fit, Finish & Lifetime Warranty

    Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The RML-3W is guaranteed by Rogue for Life.

  • 4Space Efficiency

    The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5" of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

  • 5 Easy Installation + Optional Stringers

    Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2" on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (16.375" x 2.5" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

  • 6Rogue Shipping

    Rogue prides itself on fast, professional shipping, often with same-day turnaround times. Your bar will be packaged safely and ship fast. You can follow the progress of your order using the Rogue Shipping Tracker.

Stringer Installation

Rogue RML-3W Fold Back Wall Mount Rack is rated 4.9 out of 5 by 214.
Rated 4 out of 5 by from How do you not have adjustable feet? My only complaint.... this is a fold out rack, why do you not make adjustable feet for the bottom? Most people will be putting this in a garage with sloped floors, seems like a no brainer.
Date published: 2018-11-01
Rated 5 out of 5 by from Love love love my rack! sturdy versatile..BADASS! This completed my home gym. Squats and pull-ups so key to my workouts.
Date published: 2018-10-30
Rated 5 out of 5 by from Simple and Effective I bought this a month ago, it took a friend and I an hour to fully install into my wall, and I've been using it every morning ever since. It's durable and still light and manageable enough to not completely take up my entire garage. I love this thing and couldn't be happier with it.
Date published: 2018-10-23
Rated 5 out of 5 by from Excellent purchase I was hesitant to purchase but after doing so I have been incredibly satisfited with this product. Excellent durability and functionality. Worth every penny for a high quality rig.
Date published: 2018-10-16
Rated 4 out of 5 by from Mount into cinderblock Can you mount lower stringer into cinderblock? What are options?
Date published: 2018-10-11
Rated 5 out of 5 by from Great rack! Very sturdy Easy to mount, takes up very little room! Pull-up grip is amazing as well, very comfortable and doesn’t tear up your hands.
Date published: 2018-10-05
Rated 5 out of 5 by from Solid design! Recently bought this to save time from going to the gym. Feels like I’m at the gym with the quality of the rack and bench. If I use this 40 times it will have paid for itself by not paying a gym membership
Date published: 2018-09-30
Rated 5 out of 5 by from Great piece of equipment. Super easy installation, sturdy, and fits perfectly in my one car garage.
Date published: 2018-09-24
  • y_2018, m_11, d_14, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_214
  • loc_en_US, sid_RF0611group, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue