Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
989 Reviews
Made in U.S.A.

Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
989 Reviews
Made in U.S.A.
$600.00

Rack Depth*

21.5"
41.5" (+$100.00)

Add Stringer*

None
Add Stringer Pair (+$90.00)
Product Description
Gear Specs
Shipping
Product Description

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

Read More

ROGUE RML-3W FOLD BACK WALL MOUNT RACK

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

A Rogue original Fold Back Rack is built with two 3x3" 11 gauge steel uprights, laser cut in Columbus, Ohio, with Westside hole spacing through the bench/pull area, and 2"-on-center spacing above and below. All steel is powder coated in the Rogue factory for a durable finish.

Optional Fold Back Rack Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10.125" tall, and extend 0.8125" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

ATTN: Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.

Gear Specs

Specifications

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 3x3" 11 gauge steel, 90.375" height
  • Inside Depth: Inside depth - 21.5" or 41.5"
    Stringer Not Included
  • (1) Set of Monster Lite J-Cups
  • (4) Mounting Brackets
  • (4) 0.625" x 5" Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 0.625" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10.125" tall, 0.8125" extension off the mounting surface

See More: Rogue Power Racks

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight163LB or 190LB
LengthFrom Wall - 24.75" or 43.75"
Width56.1875" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height90.375"
Foot Print24.75" or 43.75" x 56.1875"(On Wall)
Steel Notes3x3" 11 gauge steel
Other Product SpecsInside depth - 21.5" or 41.5"
Stringer Not Included
Monster Lite CompatibleYes

KEY FEATURES OF THE RML-3W

1

HEAVY GAUGE AMERICAN STEEL & HARDWARE

The RML-3W uses heavy-duty 3x3" 11 gauge steel uprights with 0.625" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The RML-3W rack is compatible with most of our exclusive ML accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

2

CHOICE OF DEPTH

The Fold Back Rack is available in two depths: 21.5" and 41.5". In the 21.5" version, the sides of the rack will position flush against the wall whether you swing them inward (towards each other) or outward. With the 41.5" depth rack, the sides can still fold in or out, but if both are moved inward, there will be a slight overlap—so to open up max space, you'd want to fold either both sides outward or one inward and one outward. For most setups the 21.5" is the best choice. Choose 41.5" if you need more space in the rack for gymnastic movements.

3

FIT, FINISH & LIFETIME WARRANTY

Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The RML-3W is guaranteed by Rogue for Life.

4

SPACE EFFICIENCY

The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5" of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

5

EASY INSTALLATION + OPTIONAL STRINGERS

Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2" on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (16.375" x 2.5" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

Stringer Installation

Recommended Products

Reviews

1 - 8 of 989 Reviews
Sween
Baltimore, MD
★★★★★
★★★★★
1 month ago
Way Above Expectations
Extremely high quality products with impressive features. Packaging was first rate and arrived on time in perfect condition. Installation instructions were overly simplistic. After installing for the first time I would do several things differently second time around now that I understand the design. But very happy with the products.
Helpful?
Yes · 0
No · 0
Mo AV8R
Hemet, Ca
★★★★★
★★★★★
1 month ago
Great Rack, Love the color
I bought the 21in wall mounts, I wish I would have bought the 41.5in ones. The 21in doesn't give enough room to use an incline bench or military press. The rack is of great quality!
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
Rico63
Elk Grove, CA.
★★★★★
★★★★★
1 month ago
RML-3WC Folding Rack
It’s been about a month now since I installed and started using this rack. Overall I’m very happy with the rack. One thing I didn’t foresee is that the uprights would get pretty marred from the spotter arms. It doesn’t really bother me because I think it’s par for the course. I was previously using Powerblocks dumbbells for leg work but now I can really see gains with the rack and free weights again. So glad I got the rack, thanks Rogue!
Yes, I recommend this product
Beast Mode Gym
Helpful?
Yes · 4
No · 0
BBald
Texas
★★★★★
★★★★★
1 month ago
Great Rack
Great rack…I purchased the 41.5” depth bars and wish I would have purchased the 21.5”. Other than my mistake…love the rack.
Yes, I recommend this product
Helpful?
Yes · 3
No · 0
Aggie
Aggie
★★★★★
★★★★★
1 month ago
Rock Solid!
This thing is rock solid. Pops has had one for a while and I finally pulled the trigger and mad I didn’t do it earlier. Had one issue (shipping related) and Rogue made things right immediately. Awesome company that stands behind their products and offers stellar customer service!
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
DenBee
Fort Meade
★★★★★
★★★★★
1 month ago
I have my garage back!
Foldback rack is a game changer. Winter is coming and I needed space for my car. Now I have room for both! Even with the arms extended there’s plenty of room for my car.
Yes, I recommend this product
Foldback rack extended
Helpful?
Yes · 3
No · 0
Mooney82
Los Angeles, CA
★★★★★
★★★★★
1 month ago
So happy
Bought this a few months ago for our garage gym and it’s fantastic. Very sturdy (we did get the stringers), very easy to use, folds up nicely. Also, want to add that Rogue’s customer service is excellent!
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Ell2021
Cornell WI
★★★★★
★★★★★
1 month ago
LOVE, LOVE IT!
I absolutely love it. Supper happy with how it all turned out
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery