Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
1067 Reviews
Made in U.S.A.

Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
1067 Reviews
Made in U.S.A.
$595.00

Rack Depth*

Product Description

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

Read More

ROGUE RML-3W FOLD BACK WALL MOUNT RACK

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

A Rogue original Fold Back Rack is built with two 3x3" 11 gauge steel uprights, laser cut in Columbus, Ohio, with Westside hole spacing through the bench/pull area, and 2"-on-center spacing above and below. All steel is powder coated in the Rogue factory for a durable finish.

Optional Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

ATTN: Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.

Gear Specs

Specifications

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 3x3" 11 gauge steel, 90.375" height
  • Inside Depth: Inside depth - 21.5" or 41.5"
    Stringer Not Included
  • (1) Set of Monster Lite J-Cups
  • (4) Mounting Brackets
  • (4) 5/8" x 5" Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 5/8" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10-1/8" tall, 13/16" extension off the mounting surface

See More: Rogue Power Racks

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Loading

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight163LB or 190LB
LengthFrom Wall - 24.75" or 43.75"
Width56.1875" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height90.375"
Foot Print24.75" or 43.75" x 56.1875"(On Wall)
Steel Notes3x3" 11 gauge steel
Other Product SpecsInside depth - 21.5" or 41.5"
Stringer Not Included
Monster Lite CompatibleYes

KEY FEATURES OF THE RML-3W

Loading
1

HEAVY GAUGE AMERICAN STEEL & HARDWARE

The RML-3W uses heavy-duty 3x3" 11 gauge steel uprights with 5/8" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The RML-3W rack is compatible with most of our exclusive ML accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

Loading
2

CHOICE OF DEPTH

The Fold Back Rack is available in two depths: 21.5" and 41.5". In the 21.5" version, the sides of the rack will position flush against the wall whether you swing them inward (towards each other) or outward. With the 41.5" depth rack, the sides can still fold in or out, but if both are moved inward, there will be a slight overlap—so to open up max space, you'd want to fold either both sides outward or one inward and one outward. For most setups the 21.5" is the best choice. Choose 41.5" if you need more space in the rack for gymnastic movements.

Loading
3

FIT, FINISH & LIFETIME WARRANTY

Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The RML-3W is guaranteed by Rogue for Life.

Loading
4

SPACE EFFICIENCY

The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5" of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

Loading
5

EASY INSTALLATION + OPTIONAL STRINGERS

Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2" on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (3/8" x 2-1/2" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

Stringer Installation

Recommended Products

Reviews

Sossaye
Kansas City
★★★★★
★★★★★
3 weeks ago
Sturdy and easy to assemble
I was a bit nervous to assemble this but it was super easy! It’s extremely sturdy and shows high quality material and design.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Tigerstripes
Des Moines Iowa
★★★★★
★★★★★
5 weeks ago
Really solid
I was a little nervous when putting this together about how sturdy it would be. Once I got everything tightened up it is really solid. I was planning for this set up for a while, so I did add addition cross bracing in the wall before the sheet rock was hung.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
E Harp
★★★★★
★★★★★
5 weeks ago
Wall Mounted Rack
Have had this for a couple of months now, love it.
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
CoachJMillz
★★★★★
★★★★★
5 weeks ago
Great gear and great service!
Love this rig! Pretty easy to set up, love how it folds back to save space, and the 41.5" depth is perfect for all us gymnasty freaks!
Yes, I recommend this product
Helpful?
Yes · 1
No · 0
Tommy 1192
Port Charlotte, Fl
★★★★★
★★★★★
April 18
Quality control could be better
A lot of my friends referred this rack to me so I decided to purchase it. Seems pretty solid and I definitely recommend but the quality control needs a little work. First, didn’t receive all of the necessary hardware to install, missing for nuts, no biggie so I went to Home Depot and got them. Second, one of the j hooks is bent inward so it scratched the outside of the rack. I’m sure they’ll take care of it but a tiny bit frustrated
Yes, I recommend this product
Bent j hook
Scratched the side of rack because too tight
Helpful?
Yes · 5
No · 5
Mattx
AZ
★★★★★
★★★★★
April 17
Amazing Quality
Well made equipment. 10/10, sturdy, durable and looks great!
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Silver fox
Portland or
★★★★★
★★★★★
April 17
Works great
These are tough and don’t slip. Lock tight works great
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Cedar City, Ut
★★★★★
★★★★★
April 16
Garage Gym
Absolutely love this setup! perfect for small spaces and the instructions were easy to navigate. I went to home Depot, purchase a treated 2X6 board and 3 inch lag screws. I've had my equipment now for about 2 months and it's worked amazing. I'm 240 lbs and the pull up bar holds me line a champ. I highly recommend this set upfor busy people like me, who work long hours and can't always make it to the gym..... Now there's no excuse! Stay jacked my friends
Yes, I recommend this product
New Rogue set up!
Helpful?
Yes · 3
No · 1
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery