ORDER BEFORE 3PM EST 12/17 TO GET YOUR GEAR BEFORE CHRISTMAS. E-Gift Cards and Expedited Shipping are available. Click for Details

Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
1046 Reviews
Made in U.S.A.

Rogue RML-3W Fold Back Wall Mount Rack

★★★★★
★★★★★
4.9
1046 Reviews
Made in U.S.A.
$610.00
Product Description

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

Read More

ROGUE RML-3W FOLD BACK WALL MOUNT RACK

Space Saving Power Rack, Made in the USA

The design challenge was to come up with a wall-mount unit that could be folded inward or outward for space savings, yet still offer the sturdiness of our standard Monster Lite racks. To achieve this, our engineering team developed a unique hinge-and-pin system that is both easy to install and rock solid. In use as a squat stand, pull up rig, or power rack, the feel is miles beyond lighter setups that use thinner steel.

A Rogue original Fold Back Rack is built with two 3x3" 11 gauge steel uprights, laser cut in Columbus, Ohio, with Westside hole spacing through the bench/pull area, and 2"-on-center spacing above and below. All steel is powder coated in the Rogue factory for a durable finish.

Optional Fold Back Rack Stringers

For optimal support, Rogue recommends adding a pair of stringers to your Fold Back Rack order via the menu on this page. Our custom-compatible stringers are made from laser-cut and formed 11-gauge steel and finished in our texture black powder coat. They measure 59" long x 10-1/8" tall, and extend 13/16" off the mounting surface when installed. One stringer is used to mount the top hinge brackets and the other for the bottom hinge brackets. You can learn more about our Fold Back Rack Stringers in the Key Features section below.

ATTN: Spotter Arm Use: How and what the rack is secured to on the wall should be checked by a contractor. Depending on the wall type and how it was secured will depend on if the wall can take that stress.

Gear Specs

Specifications

  • Made in the USA
  • Fully Retractable Power Rack
  • Uprights: 3x3" 11 gauge steel, 90.375" height
  • Inside Depth: Inside depth - 21.5" or 41.5"
    Stringer Not Included
  • (1) Set of Monster Lite J-Cups
  • (4) Mounting Brackets
  • (4) 5/8" x 5" Detent Pins
  • (1) Quick-attach Pull-Up Bar
  • (2) 5/8" x 4" Hitchpins w/ Lanyard for locking in Pull-Up Bar
  • (2) UHMW Plastic Caps to protect floor
  • Optional Stringer Pair: Laser-Cut 11-gauge steel, 59" long x 10-1/8" tall, 13/16" extension off the mounting surface

See More: Rogue Power Racks

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

Loading

Gear Specs

BrandRogue Fitness
Made In USAYes
Product Weight163LB or 190LB
LengthFrom Wall - 24.75" or 43.75"
Width56.1875" Overall (On Wall)
49" Outside Uprights
43" Inside Uprights
Height90.375"
Foot Print24.75" or 43.75" x 56.1875"(On Wall)
Steel Notes3x3" 11 gauge steel
Other Product SpecsInside depth - 21.5" or 41.5"
Stringer Not Included
Monster Lite CompatibleYes

KEY FEATURES OF THE RML-3W

Loading
1

HEAVY GAUGE AMERICAN STEEL & HARDWARE

The RML-3W uses heavy-duty 3x3" 11 gauge steel uprights with 5/8" diameter SAE grade 5 bolt hardware. Laser cut holes and heavy duty hardware maintain maximum strength. The RML-3W rack is compatible with most of our exclusive ML accessories and add-ons. Start with the Fold-Back as your base, and build your arsenal over time.

Loading
2

CHOICE OF DEPTH

The Fold Back Rack is available in two depths: 21.5" and 41.5". In the 21.5" version, the sides of the rack will position flush against the wall whether you swing them inward (towards each other) or outward. With the 41.5" depth rack, the sides can still fold in or out, but if both are moved inward, there will be a slight overlap—so to open up max space, you'd want to fold either both sides outward or one inward and one outward. For most setups the 21.5" is the best choice. Choose 41.5" if you need more space in the rack for gymnastic movements.

Loading
3

FIT, FINISH & LIFETIME WARRANTY

Every weld at Rogue is inspected individually at each step of the process for integrity and appearance. Each laser cut is inspected. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. The RML-3W is guaranteed by Rogue for Life.

Loading
4

SPACE EFFICIENCY

The detent pins included with the Fold Back Rack conveniently lock the rack into either the open position (ready for use) or closed position (against the wall). When stowed away, the rack takes up less than 5" of space from the wall, meaning you can have a world-class power rack in your garage without having to park your car on the street at night. Maximize your space with our efficient Wall Storage options to save even more space.

Loading
5

EASY INSTALLATION + OPTIONAL STRINGERS

Each unit comes standard with a Quick-Attach Pull-Up Bar, (4) mounting brackets for installation + all necessary hardware, a set of J-cups, and (4) detent pins. Having holes 2" on center allows for some choices in mounting the swing arms, which can be important if you need foundation clearance. Customers can also choose to add a pair of Fold Back Rack Stringers to their order at an additional cost [Highly Recommended]. The 11-gauge steel stringers feature pre-cut slots, allowing users to mount them to a standard wood stud wall (4 studs required for installation). Our stringer pair comes with all required hardware (3/8" x 2-1/2" black wood lags and washers), but any customers attempting to secure the stringers to a wall construction other than wood stud will be responsible for acquiring the correct hardware.

Stringer Installation

Recommended Products

Reviews

Bencarp3
Wyoming
★★★★★
★★★★★
1 week ago
Great equipment
Great quality and value. This has been a great addition to our setup and works as it should.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
OFBG Old Fat Bald Guy
Chesapeake VA
★★★★★
★★★★★
1 week ago
Before covid
Got the rig as Covid was starting. It’s great. Highly recommend it.
Yes, I recommend this product
Helpful?
Yes · 0
No · 0
Jonnay
Ottawa, ON
★★★★★
★★★★★
2 weeks ago
Cornerstone of a garage gym
I bought this as part of an ongoing home gym project and couldn't be happier. It's super sturdy, heavy duty and feels bulletproof during use. Looking forward to decades of workouts! Installation was a breeze, just keep in mind that the height of the support members is **independently** adjustable in 2" increments. I made the mistake of moving my top riser up with my bottom riser... Oups, few holes to patch. Also don't forget to leave room for the chin-up bar at the top! If you have access to a laser level, take advantage to simplify install.
Yes, I recommend this product
Originally posted on roguecanada.ca
Dclayton3
NC
★★★★★
★★★★★
October 5
Awesome set-up
We bought this for our garage and could not be happier. Well made, nice look and very easy to put together!!
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
Channellcat
Wichita kansas
★★★★★
★★★★★
September 19
Product review
I have had two separate orders. Both came in on time and products are amazing. Just as advertised. Well worth the cost
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
DT007
Katy,TX
★★★★★
★★★★★
September 17
Amazing rack!
I ditched my pricey gym membership for the monster lite rack! The convenience of walking out to my garage and getting a workout in is awesome! This rack is incredibly well built and you will not be disappointed!
Yes, I recommend this product
Best investment!
Helpful?
Yes · 8
No · 0
KelleyJean
Austin, TX
★★★★★
★★★★★
September 13
Perfect for my garage gym
I purchased these to add on to my Rogue garage gym set up. Everything looks amazing, feels sturdy, and my workouts have been moving seamlessly thanks to this equipment.
Yes, I recommend this product
Helpful?
Yes · 2
No · 0
DanielG
Kentucky
★★★★★
★★★★★
September 8
Great For Garage Gym
This was my first purchase from Rogue. I researched for months different manufactures of wall mount rigs and finally settled on this after a lot of positive reviews. Item shipped quickly and installation was easy. I did not purchase the stringers, and it was still a very easy installation. I am a little disappointed in the finish of the product. There was one deep gash on one of the uprights and alrought the exterior of the items are coated nice, the same cannot be said for the interior of the uprights.
Yes, I recommend this product
Gash In Coating
Interior Rush On Uprights
Helpful?
Yes · 4
No · 0

Response from Rogue Fitness:

September 13
Thank you for posting this! We're sorry to see the damage to your uprights and the team is investigating now.
#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery