Add to Registry
Please choose the registry you want to add this product to:
We added two uprights and 6x plate storage to a standard R-4 to create the beast that is the Rogue R-6 Power Rack. Like all the racks in the Infinity R-Series, this unit is based on the Westside design (5/8” holes, spaced 1" through the bench & clean pull zone, 2” above and below) and constructed from ultra-durable 2x3” 11-gauge steel. The key difference is the expanded, instant-access storage potential. The R-6 includes (2) Double Plate Posts and (4) Single Plate Posts equipped for any standard Olympic plates, plus (6) Band Pegs for both using and storing bands and chains.
A Fat/Skinny Pull-Up Bar and an X-43 Multi-Grip Bar come standard with the R-6, as does a set of Infinity J-Cups and Pin/Pipe Safeties. The complete unit is 90” tall (a bit taller with the Multi-Grip Bar installed) and creates a footprint of 80” x 53”. You can make multiple custom additions to your order using the choices from the drop down menu on this page.
Whether utilized for a garage gym or the elite-level college/pro strength and conditioning format, the R-Series Power Rack is the foundation for a power athlete’s training needs.
See Also: The Complete Rogue Infinity R-Series
|Made In USA||Yes, with US steel or US & CAN steel|
|Length||76" (outside of uprights)|
|Width||47" (outside of uprights)|
|Steel Notes||2x3" 11 Gauge Steel|
|Foot Print||80" deep x 53" wide|
The R-6 is built in Columbus, Ohio with US steel or US & CAN steel, using (6) 2x3” 11-gauge steel uprights, 90” tall, with 5/8" diameter, laser-cut holes and heavy-duty hardware. The unit is compatible with a wide assortment of Rogue Infinity Series attachments and accessories, and comes standard with both a Fat/Skinny Pull-Up Bar and an X-43 Multi-Grip Bar.
With an inside depth of more than 6", the R-6 gives athletes plenty of real estate in which to operate. The convenient storage elements, meanwhile, keep the gym itself more organized and efficient—as athletes can load the bar directly off the back of the rack, store both large and small plates on the 6 included posts, and even hang bands and chains off the additional storage pegs.
At Rogue, every weld and every laser cut is inspected individually at each step of the process for integrity and appearance. Every part is again individually inspected for finish after the powder coat process. The entire package receives a final comprehensive quality assurance check before it’s shipped. Once it’s yours, the R-6 is guaranteed by Rogue for Life.
Owners of the R-6 Rack can customize their system with the addition of a wide range of compatible tools and accessories. Along with adding a bar, bench, or plates to your order, you can expand the power rack itself with the inclusion of a Rogue Matador, Vertical Bar Hanger, and more.
Even without custom additions, the standard Rogue R-6 Rack comes with all of the hardware and basic accessories necessary to have a pro-caliber power rack at your disposal. This includes all necessary 5/8” bolts and fasteners, (1) 43” Fat/Skinny Pull-Up Bar (with 1.25” and 2” diameter bars), (1) X-43 Multi-Grip Bar, (2) Infinity J-Cups with protective UHMW plastic, (2) Pin/Pipe Safeties, and the aforementioned (6) Storage Posts and (6) Band Pegs.
|Footprint||53" x 34"||53" x 53"||53" x 80"|
|Pull-up Bar||(1) Fat/Skinny Pull-up Bar||(1) Fat/Skinny Pull-up Bar||(1) Fat/Skinny Pull-up Bar & (1) X-43M Multi-Grip Bar|
|J-Cups||Set of 2, with Protective Plastic||Set of 2, with Protective Plastic||Set of 2, with Protective Plastic|
|Band Pegs||Set of 4, included||Set of 4, included||Set of 6, included|
|Pin and Pipe Safeties||Set of 2, included||Set of 2, included||Set of 2, included|
|Plate Storage||Optional||Optional||(4) Single Plate Storage & (2) Double Plate Storage|