Online orders and operations are active. Retail store is closed. | Covid-19 Status
Daily Shipping Deals





Special Price $1,145.00

Regular Price: $1,145.00

* Required Options

RM-3 Power Rack Configurations

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Length 36"
Width 49"
Height 90", 100", or 108"
Steel Notes 3x3" 11 Gauge Steel
Foot Print 40" x 53"
Monster Compatible Yes

Rogue RM-3 Monster Rack 2.0

Rogue designed the fully customizable power racks of the Monster Series to meet the high demands of the top professional, collegiate, and high school athletic facilities in the world. We used bigger, 3x3" 11-gauge steel tubing, over-sized 1" hardware, and a bolt-together design for easier portability and affordable shipping. With Version 2.0, we’ve also rolled out a number of new features, including a wide spectrum of custom color options, laser-cut pin position numbers on the uprights and bottom crossmembers, and a keyhole pattern on the sides of each upright—creating compatibility with more add-ons and attachments.

The 30" depth RM-3 Monster Rack is available in three height options (90”, 100”, 108”); comes with all required 1" hardware and 4 band pegs; and ships standard with (2) Rogue Monster 1.5" Wrenches. Any other attachments and accessories pictured are NOT included. You can explore many of our compatible Monster Rack attachments on this page and add selections to your order (at a listed additional cost) via the convenient dropdown menu.

Updates on Color Options: The new Monster Rack 2.0 units include a dozen different custom color coating options, most of them in a medium gloss powder coat (the Satin Clear finish is a transparent finish, meaning any blemishes or marks from the manufacturing process will still be visible in the steel). Customers can also choose our new Black Cerakote finish; an ultra-durable, ceramic-based coating first popularized in the firearm industry. Prior to receiving a Cerakote finish, all parts of the rack are sandblasted to remove any dirt and contaminants for a better coating adhesion.

Check out ALL of the custom options available on the 30" depth RM-3 Monster Rack below.

Important: This rack must be bolted to the floor before use.

Explore the Monster Rack Attachments.

Monster Series vs. Infinity Series


Explore Attachments


Available in:

Allows a 43" Single Pull-Up Bar to be mounted at a max height of 84" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Available at a slightly reduced price from standard 100" unit.

100" (Standard)
The Monster's default height selection. Allows a 43" Single Pull-Up Bar to be mounted at a max height of 94" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack.

Allows a 43" Single Pull-Up Bar to be mounted at a max height of 102" from the ground. Includes keyholes on the sides of each upright and numbered holes (up to 40) on both the front and back, enabling a clear view from inside or outside of the rack. Priced slightly higher than standard 100" unit.

All Monster uprights are made from 3x3" 11 Gauge Steel and include 1" holes spaced 2" on center.


Available in 11 custom colors + Cerakote:

Bright Blue, Bright Green, Burnt Orange, Dark Blue, Dark Red, Gun Metal, Light Gray, Rogue Red, White, Satin Clear, Satin Black (Standard)

All color options come in a durable, medium gloss powder coat. Stainless Steel features a 180 Grit polished finish.

Cerakote : This advanced ceramic-based coating, was originally established in the gun industry for its remarkable durability in thin applications.


2 Hardware Finishes

Choose between Black Zinc or Bright Zinc.


XM-431 Monster 43” Single Pull-Up Bar

Our standard, default selection for the front of the rack, this single 1.25" diameter pull-up bar includes 9" endplates and mounting holes 6" on center, along with a textured black powder coat finish.

XM-433 Monster Fat/Skinny Pull-Up Bar

Includes (1) 1.25" pull-up bar and (1) 2" fat grip pull-up bar built in to the same crossmember, spaced 9.5" on center. The large endplate is 17" overall, and mounting holes are 14" on center. Finish is our standard textured black powder coat.

XM-43N Monster 43" Crossmember w/ Nameplate

Features a Satin Black base crossmember with laser cut "ROGUE" panels on each side. Red is the default panel color, but if a customer selects a custom color, the panel will change to match it.

43" Monster Socket Pull-Up Bars

Single bar available in a wide range of custom Cerakote color finishes with optional barbell-style knurling. Ships standard with (2) MG Black mounting sockets and (4) Bright Zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. The bar itself is 1.125" in diameter, and all Cerakote-coated versions include the Rogue logo in the center.

43" Monster Socket Pull-Up Curl Bar

Made from 28.5MM cambered steel with extended knurling and Black E-Coat finish. Ships standard with (2) MG Black mounting sockets and (4) bright zinc bolt assemblies measuring 1” x 4.75”. Socket mounting holes are 6” on center. Design enables close-grip and wide-grip pull-ups.

XM-43P Monster 43" Beam w/ Gusset

A new Monster crossmember designed with 2 gussets for added strength and a flush mount with the top of the uprights. Includes laser-cut "R" logos on each gusset and a Satin Black powder coat finish across the beam. Does NOT function as a pull-up bar.


Standard Monster J-Cup Pair

Our default J-Cup selection. Features UHMW plastic within the cup itself to protect the bar's knurling, as well on the backside and the clasp to protect uprights from scratching/chipping. 1000LB rating. Rackable Depth of 2 3/4".

Sandwich Monster J-Cup Pair

The Monster Sandwich J-cup has a UHMW plastic core which offers full protection against your barbell knurling. It also has UHMW plastic on the backside to protect the rack from chipping. 1000LB rating. Rackable Depth of 2 1/2".

2" Sandwich Monster J-Cup Pair

The side plates fit into a recessed, machined plastic core (2" wide) to prevent metal-to-metal contact. The hardware (that connects the plastic to the side plates) is also recessed, preventing the bar or a user’s hand from scraping against them. Welds are inside the side plates for a clean edge, and UHMW plastic is featured on the clasp and back plate to prevent damage to the uprights. A thin piece of rubber on the side of the clasp also softens contact between the clasp and upright when the J-Cup is swung into place. 1000LB rating. Rackable Depth of 2 1/2".

Monster Strap Safety System 2.0

3" wide reinforced nylon straps designed to prevent damage to barbell knurling on any missed lift, or to roll the bar safely away from the user on a drop. Rated for 10,000LB. Notched pin design securely locks the system into place and allows for easy, quick adjustments. Depths are 24", 30" and 43".


Monster Pin & Pipe Safety Set

Our default safety selection. Standard pair. Pin: 1" diameter, zinc coating. Pipe: 1.5" diameter, schedule 80 pipe, black powder coat. Depths are 24", 30" and 43".

All required 1” hardware and a set of 4 band pegs are also included standard with all orders.

See More: Monster Series Power Racks

Rogue RM-3 Monster Rack 2.0 is rated 4.9 out of 5 by 37.
Rated 5 out of 5 by from This thing is unbelievable I bought this in the rogue red and I was legimtately shocked at how heavy the entire rig is. The bolts are the size of my head and the bolt kit for the rack weighs 42 pounds if that tells you anything about the size and heaviness of this entire rack. I’ve seen the titan and REP racks, this blows it away. Well done guys... so happy
Date published: 2020-12-28
Rated 5 out of 5 by from Power Rack Monster Truly satisfied with my purchase and love the color.
Date published: 2020-11-27
Rated 5 out of 5 by from Home Gym Centerpiece Had the Monster Rack 2.0 for a month. Basement Gym Centerpiece. Extremely stable without bolting to floor. I opted to purchase two fat/skinny pull up bars to add as crossbar stabilization and gives me options for pull up work or hanging knees. Big enough to add components (I added J cups, matador, and landmine) but small enough to fit in limited spaces. Highly recommend and easy 20-30 minute to put together. Thanks Rogue!
Date published: 2020-11-10
Rated 5 out of 5 by from Well made Built like a tank, very stable, and solid. Excellent customer service
Date published: 2020-10-07
Rated 4 out of 5 by from Accessories / Add-Ons Make the Rack I've placed 26 orders with Rogue since April-2020. This is the first review that I've written/provided on the products I have. Sharing some of my perspective about Rogue, home gym build/buying process and the RM3. First Rogue has lots of great reviews here and elsewhere. So my impression of Rogue is that its great but not perfect as some reviews led me to believe. Other companies also make quality products and should be part of your consideration. Especially when it comes to weights and things which are not unique. I've had orders that came damaged or missing parts. Best way I found to resolve the issue is to send a message via (email) the Order Page. I typically get responses within 1-3 business days. Specifically for the RM3 - I'll first start off saying, I would've gone with the 100" rack. I did weigh the difference between the 90" (what I went with) vs the 100". Functionally, the 90" worked well for everything. I'm 6'2". I can reach the pull up bar on my tip toes and clear the floor when hanging. I can do toes to bars (strict) w/o touching the ground. I ordered the multi-grip crossmember for pull ups which adds 6" to the overall height for pull ups. I can do standing overhead shoulder presses w/o hitting the top. SO the 90" works well (fit functionally) and I don't have to jump/climb to grab the pull up bar. With 100" plus the 6" on the multi grip - I would have to climb onto something. There is no reason for me to get the 100" except for the looks and who doesn't want more inches. The rack is fine and solid. Its really 4 steel posts. What makes the rack great is the accessories you add to it. Land mind, various pull up bars, cables, dips, bands, etc. Definitely get the safety straps & sandwich j-cups. Get all the upgrade options as they are cheaper than buying it individually. I got the 30" specifically and happy with the decision. I have a 8x12 platform. With the 30" rack, it leaves me a 8x8 area where I can place mats down and do my MMA (muay thai, BJJ) drills. The pad is also a nice way to "close" my gym and keep toes safe.
Date published: 2020-09-25
Rated 5 out of 5 by from Excellent quality, the best you can get. I bought this a month ago and couldn't be happier. It's true what they say about the powder coating. I've bought other equipment in the past, but if I can buy it from Rogue, I will for now on!!! Delivery was fast and painless, even in plague lock down.
Date published: 2020-09-16
Rated 5 out of 5 by from Perfect size. Multifunctional I love this rack. I’ve have been using it everyday and have found other innovative ways to use it. I’ve added other attachments that have further extended its functionality. It’s the best piece of equipment I’ve purchased. Lead time was as promised and the customer service is superb.
Date published: 2020-09-15
Rated 5 out of 5 by from solid very happy so far. was initially concerned that the depth might not be enough but this is not a problem at all. more than enough room.
Date published: 2020-09-05
  • y_2021, m_1, d_14, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_en_US, sid_RM-3, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue