SHIPPING DELAY: 5-7 DAYS.
Online orders and operations are active. Retail store is closed. | Covid-19 Status
Daily Shipping Deals

BUY 3 OR MORE 3 SHIPS FREE ITEMS AND THEY SHIP FOR FREE Shop Now

FREE SHIPPING ON SELECT ITEMS Shop Now

BUY A RIG* AND YOUR ENTIRE ORDER SHIPS FREE See Details

ORDERS OF $5K SHIP FREE See Details

Rogue HR-2 Half Rack

Rogue HR-2 Half Rack
$655.00

Availability: Ships in 14-28 Business Days

HR-2 Conversion Kit
$245.00
16" Pin/Pipe Safety Set
$49.25
For Use with Rogue HR-2 Half Rack Only.
SP3358 Plate Storage Pair - Long for Monster Lite
$49.75

Rogue HR-2 Half Rack

The customizable Rogue HR-2 Half Rack can be installed as a stand-alone unit or by converting an existing Monster Lite Series squat stand .

Manufactured in Columbus, Ohio, the HR-2 features the same 2x3" 11-gauge steel base and 48" x 49" footprint as the SML-2, but incorporates an additional pair of 3x3” 11-gauge steel uprights and 17” crossmembers in the back of the unit. This gives the rack a huge amount of additional storage capacity and almost a foot and a half of inside depth for benching, rack pulls, and more. The Half Rack also offers a range of customizable options to best suit your needs—including the optional plate storage and pin/pipe safety sets, and a selection of different heights for the uprights themselves (90” or 108” for the front; 70” or 90” for the back).

IMPORTANT: If you already own a Rogue Monster Lite Squat Stand (SML-1, SML-2, or SML-3) and wish to convert it to an HR-2, we offer a Half Rack Conversion Kit that would include all the components and hardware you’ll need.

Specifications:

  • Made in the USA
  • Steel Notes: 3x3" 11-gauge uprights, 2x3" 11-gauge base
  • Footprint: 48" x 49"
  • (1) Monster Lite J-Cup Pair included standard
  • (1) 43” Single Skinny Pull-Up Bar
  • Back Upright Height Options: 70", 90" – Front Upright Height Options: 90", 108"
  • Optional Add-Ons: 16" Pin/Pipe Safety Set; Plate Storage Pairs
  • Unit does not need to be bolted to the floor.

HR-2 Conversion Kit Includes:

  • (1) Pair Monster Lite Sticks (90" or 70")
  • (1) Pair HR-2 Half Rack Crossmembers
  • Conversion Kit Hardware Included

Compatible Accessories Include: Monster Lite Matador | Monster Lite Safety Spotter Arms

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight 225LB - 255LB, varies based on upright selection
Length 49"
Width 48"
Height 92.375" or 110.375"
Other Product Specs Westside Hole Spacing
Steel Notes 3x3" 11-gauge uprights, 2x3" 11-gauge base
Foot Print 48" x 49"
Infinity Compatible Yes
Monster Lite Compatible Yes
Rogue HR-2 Half Rack is rated 4.9 out of 5 by 80.
Rated 5 out of 5 by from Great Rack! Great Half Rack! Rogue does not disappoint! Garage gym coming along.
Date published: 2020-07-30
Rated 4 out of 5 by from Half Rack Really enjoying it , worth the wait... now just need some plates to become available before month 3 of trying to get some and finish this 4 month assembly w a happy heart.
Date published: 2020-07-28
Rated 5 out of 5 by from Solid This rack is solid as a rock. Easy to put together with one person. Hand tightened everything, then went around and tightened with wrench and socket after it was assembled. Really like it
Date published: 2020-07-27
Rated 5 out of 5 by from All you need All I needed. Super sturdy especially if you add weights to the bottom of the main posts (it tilted when doing kipping pullups or t2b)... very nice.
Date published: 2020-07-03
Rated 5 out of 5 by from Love my rack I pieced the setup over the course of 5 weeks, and rogue delivered. The Monster Lite has been the best rig, my squats, deads, and benches have jumped. So proud to have this in my garage.
Date published: 2020-06-29
Rated 5 out of 5 by from Exactly what I wanted The sturdy frame is well worth the extra you pay compared to other items from different companies. This item feels like it will last a lifetime. I have no concerns doing pullups or going heavy with squat weights.
Date published: 2020-05-21
Rated 5 out of 5 by from Love this thing! I’ve had my half rack for a little over 5 months now and couldn’t be happier! I originally was looking to get a full size rack, but for the price point, the foot print and the attachment options, I couldn’t pass the HR-2 up.
Date published: 2020-04-23
Rated 5 out of 5 by from No excuse not to have a rack My Rack Setup: I've been a powerlifter and strength athlete for 30+ years and never thought I'd need a home gym because I was sure I could always find a "Real" gym within driving distance. Then the Coronavirus hit and I ate my words. So right before everything closed down I bought a Rogue HR-2 Half Rack. I have a small house and use my garage for cars, storage, and as a workspace, so I couldn't afford to turn it into a gym. But I needed a rack to squat, bench, rack pull, and do both heavy band work and reverse (hanging) band work. And the Rogue Half-Rack was it. If you are under 6 feet tall (like me) the 70/90 combo would work fine for you. If you are over 6 feet you may custom order a 90/90 combo, or if you have the ceiling height you could do the 90/108 combo. But the right height is key so you can squat inside of it and have the pin/pipe safeties there to spot you. You can pull a bench in and bench by yourself between the uprights to have the safeties there as well. I threw some mats down and I also deadlift from the floor inside the rack, do rack pulls, floor presses, and almost everything there as well. I only have to step out of the rack for military presses and overhead work. I also bought a second set of pin/pipe safeties to attach bands to, although you could use band anchors (from Rogue), but I prefer the second set of pins (although I do wrap a small elastic/bungie around the end to keep them from moving). I workout with my girlfriend and we have been able to have 2 bars resting on the rack at once, as long as my bar is racked on the inside of the back upright (get to use the pin/pipe safeties) and her bar is racked on the outside of the front upright. In this case you should buy a second set of J-hooks, and Safety Spotter Arms so your girl (or whoever is on the front of the rack) also has safeties under them. My future plan is to order a (custom order) second conversion kit to add a 108" upright to the front, so it will be 2 half racks together. That way I can work inside the first rack, and my girlfriend can work inside the second rack at the same time. As long as each bar is racked on the inside of their respective outside post, and one person is only working inside their rack at a time, it will work. Weight Storage: Unless you have a Weight Tree I highly suggest the Plate Storage Channel 8 pack that allows you to easily remove and reposition the pins. The more weights you have the more pins you will need, and the more pins you put on the rack, the less useful space you will have on the rack. If you look at the pictures I uploaded I changed my storage spots from the first pic to the second pic. While the first pic anchored the rack more, the second pic allows me to only have to pull 2 pins if I want to put the bar low for deadlifts, low rack pulls, or floor presses inside the rack, instead of having to pull 4 pins. That's why the repositional pins are key. You may need to move them to utilize the entire rack at times. Quality Review: -This thing is small enough to fit anywhere (and is pretty inexpensive), so there is no reason why you can't have rack if you really need/want one. The build quality is Rogue build quality which means it's ingenious and amazing. I see no reason why this thing would ever fail no matter how much damage I do to it. -It's a minimalist rack meaning there aren't a lot of supports to get in your way, but that also means there isn't a lot of support "locking" it together. It will have some sway and movement with racking heavy weights and pullups. However the thing is solid and it doesn't effect it. I've done Regular and Reverse Band work on the rack and it never budged enough for me to blink an eye. -I wish the pin/pipe safeties had some locking mechanism on them. As I stated earlier they do move if I attach bands on them (I know this isn't why they were made, but they are useful as band anchors) and I have to use bungies/elastics to keep them in place. If they had some kind of locking pin like the removable storage channel pins they would be perfect (take note Rogue, this is an easy upgrade to your pin/pipes). -I do dislike that the finish Rogue uses on many attachments (like the Pin/Pipes) can be easily scratched/ I know that Rogue price point is a major factor in this, but I would love some raw metal or upgraded coating options that wouldn't wear so easy. Just a thought. -I wish Rogue Offered Roller J-hooks. The only ones on the market are stupid expensive and I think Rogue can make some at typical bullet-proof Rogue quality at an affordable price point (Please contact me when you do so Rogue, as I'll buy a pair...or two). Final Thoughts (in 3 words): ***Buy the Rack***
Date published: 2020-04-22
  • y_2020, m_8, d_11, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_80
  • loc_en_US, sid_XX11797, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue