Rogue RM44-4MONO 4 Post Monolift

★★★★★
★★★★★
0
0 Reviews
Made in U.S.A.

Rogue RM44-4MONO 4 Post Monolift

★★★★★
★★★★★
0
0 Reviews
Made in U.S.A.
$5,950.00
Ships in 12-16 Weeks

Height*

100"
108" (+$200.00)

Gear Specs

BrandRogue Fitness
ColorBlack
Made In USAYes
Product Weight100" - 1020LB
108" - 1035LB
Length76" (depth - overall) / 61" (at base)
Width70" (overall) / 63" (at base)
Height100.375" or 108.375"
Other Product SpecsRecommended minimum space requirement 12'-4" x 11'-3"
Product Description
Gear Specs
Shipping
Product Description

Rogue’s freestanding 4-Post Monolift is a competition-ready power rack featuring the same gusseted corners, and 1” hardware as our premier RM43 Series. It also features 11 gauge 4x4” uprights and is available as a full 4x4” 4 post stand alone unit.  First introduced during the Max Squat event at the 2022 Arnold Strongman Classic, this 1000+ LB unit is intended for serious powerlifting gyms, and requires (a) a recommended minimum floor space of 12'-4" x 11'-3" and (b) a second person / spotter for proper operation of the monolift. There are two upright height options available: 100.375" or 108.375". 

The precision monolift system on the RM44-4MONO is adaptable to athletes of any height, offering 32 incremental, hydraulic-assisted vertical adjustments, and counter-balanced lever arms with heim joint micro adjustments. When the athlete lifts a barbell off the Monolift, their spotter can then release the counter balance lock and pull a handle to swing the hooks out of their starting position and away from the athlete. This spacing creates a means of performing heavy-weight squats and bench press without having to walk or swing the bar out from the rack. It also enables safe re-racking, as the slanted angle of the unloaded hooks makes it easy to guide the bar in after the spotter returns the Monolift to its original position. 

The 4-Post Monolift is the same width as our standard racks, 49” from outside of upright to outside of upright, but its bottom crossmembers extend significantly wider at the base to accommodate athletes who squat in a Sumo stance. All units are manufactured in the USA and include custom Strap Safety Brackets (designed for the 4x4 uprights), infinite width adjustment UHMW-protected bar catches . The uprights, crossmembers and gussets are finished in our MG Black Powder Coat Performance finish, while the logo panels and additional high wear/impact components have a texture black finish.

Please Note: While the Rogue 4 Post Monolift can be safe for solo use, it’s always recommended to have spotters available for heavier lifts.

Read More

Rogue RM44-4MONO 4 Post Monolift

Rogue’s freestanding 4-Post Monolift is a competition-ready power rack featuring the same gusseted corners, and 1” hardware as our premier RM43 Series. It also features 11 gauge 4x4” uprights and is available as a full 4x4” 4 post stand alone unit.  First introduced during the Max Squat event at the 2022 Arnold Strongman Classic, this 1000+ LB unit is intended for serious powerlifting gyms, and requires (a) a recommended minimum floor space of 12'-4" x 11'-3" and (b) a second person / spotter for proper operation of the monolift. There are two upright height options available: 100.375" or 108.375". 

The precision monolift system on the RM44-4MONO is adaptable to athletes of any height, offering 32 incremental, hydraulic-assisted vertical adjustments, and counter-balanced lever arms with heim joint micro adjustments. When the athlete lifts a barbell off the Monolift, their spotter can then release the counter balance lock and pull a handle to swing the hooks out of their starting position and away from the athlete. This spacing creates a means of performing heavy-weight squats and bench press without having to walk or swing the bar out from the rack. It also enables safe re-racking, as the slanted angle of the unloaded hooks makes it easy to guide the bar in after the spotter returns the Monolift to its original position. 

The 4-Post Monolift is the same width as our standard racks, 49” from outside of upright to outside of upright, but its bottom crossmembers extend significantly wider at the base to accommodate athletes who squat in a Sumo stance. All units are manufactured in the USA and include custom Strap Safety Brackets (designed for the 4x4 uprights), infinite width adjustment UHMW-protected bar catches . The uprights, crossmembers and gussets are finished in our MG Black Powder Coat Performance finish, while the logo panels and additional high wear/impact components have a texture black finish.

Please Note: An additional person is required to operate the counter balance lock and swing the arms out of the way. It's always recommended to have spotters available for heavier lifts. 

Gear Specs

Specifications:

  • Made in the USA
  • Featured at the Arnold Strongman Classic
  • 4x4” 11-gauge Steel Construction
  • Gusseted Crossmembers
  • 1” Hardware
  • Height Options: 100” (1020 LB) or 108” (1035 LB)
  • Footprint: 76” x 70”
  • Recommended minimum space requirement 12'-4" x 11'-3"
  • Counter Balanced Lever Arm with Heim Joint Micro Adjustments
  • 32 Incremental and Hydraulic Assisted Vertical Adjustments (powered by 12-ton hydraulic jack)
  • Finish: MG Black Powder Coat + Texture Black
  • UHMW Protected Bar Catches
  • 5/8" Solid Steel Hitch Pin Adjustments
  • Extra wide base crossmembers for Sumo Stance



See Also:
Rogue Adjustable Monolift Rack Attachment 2.0 - Monster
Rogue Adjustable Monolift Rack Attachment 2.0 - Monster Lite

Shipping

Rogue Fast Shipping

The Rogue Shipping System allows you to track your order from the time you place it to the time it hits your door. Order today, track today.

1

Competition Ready

Originally built for the Max Squat event at the 2022 Arnold Strongman Classic, the Rogue 4 Post Monolift is a unique combination of world class durability and fine-tuned precision. The freestanding rack, weighing over 1,000 LBS, is intended for top level powerlifting gyms, with 32 incremental, hydraulic-assisted vertical adjustments ensuring its effectiveness for athletes of any height. When the athlete lifts a barbell off the Monolift, their spotter can then release the counter balance lock and pull a handle to swing the hooks out of their starting position and away from the athlete. This spacing creates a means of performing heavy-weight squats and bench press without having to walk or swing the bar out from the rack.

2

Rogue’s Highest Standard of Construction

The RM44-4MONO 4 Post Monolift is manufactured in the USA using the same 11-gauge steel tubing, gusseted corners, and 1” hardware as our premier  RM43 Series but adds 4x4” uprights. This is an extremely heavy-duty unit, with each of its two height options (100.375" or 108.375") weighing more than 1,000 LBS and requiring a recommended minimum floor space of 12'-4" x 11'-3". All units are finished in our MG Black Powder Coat with additional texture black coatings on the logo panels and high wear/impact components. An included set of strap safety brackets is custom-designed for the 4x4 uprights, and an extra wide crossmember design at the base accommodates users who squat in a Sumo stance. 

Recommended Products

Reviews

#RYOUROGUETag your photos on Instagram and Twitter with #RYOUROGUE for a chance to be featured in our galleryView Full Gallery