Daily Shipping Deals

BUY 3 OR MORE 3 SHIPS FREE ITEMS AND THEY SHIP FOR FREE Shop Now

FREE SHIPPING ON SELECT ITEMS Shop Now

BUY A RIG* AND YOUR ENTIRE ORDER SHIPS FREE See Details

ORDERS OF $5K SHIP FREE See Details

Monster Lite Sandwich J-Cup Pair

$125.00

Tested at more than 1,000LB, these J-Cups have 3.5" depth and lock around two sides of the upright--increasing the structural integrity and reducing the risk of an athlete jarring a cup loose when racking the bar from below. A UHMW plastic core sits in the center of the "sandwich" to keep the barbell as safe as the person using it.

Please Note: These accessories are designed ONLY for use with the Monster Lite Line of products. For Echo Systems see Extra Echo J-cup Set . For Infinity Systems see Extra Infinity J-cup Set . For Monster Systems see Rogue Monster J-cups .

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Color Black
Product Weight 14LB
Width 1.5"
Height 10"
Other Product Specs 3.5" depth
Monster Lite Compatible Yes
Monster Lite Sandwich J-Cup Pair is rated 4.5 out of 5 by 19.
Rated 5 out of 5 by from great product Much better than the standard jcups for sure. the Standard work fine but the little extra clearance on the sandwich j cups are definitely a positive...
Date published: 2018-12-26
Rated 4 out of 5 by from Solid These are excellent J-cups. I mean what else can one say, they're J-cups. They do their job while adding extra protection for your bar. As for people saying they "sway" too much.... I have no clue what they are doing to cause this. I mean if you have a bar on them and want to center it and just drag it..... yeah... they're rotate a bit. I mean the connection point is just a peg that goes through the rack - what do you think is going to happen. I would assume this same thing would happen with ANY J-cup as they all only attach through the rack with that one peg. I've had 0 problems with "swaying" or them not staying in the spot I want them to stay in. That said, I bought these with my 490 rack to replace the standard J-cups. I also replaced the pin/pipe safety setup for the safety straps when I ordered. With the safety straps having a little bit of metal above the connection peg to the rack coupled with these much larger J-cups..... for Bench Press I can't get the J-Cups to the hole I'd like to get them on, 1 more lower. This is because if I wanted to put it there I'd have to lower my safety strap one hole and right now that is at the PERFECT height. Also.... I'd rather have the safety there for... you know... safety reasons. So as a result, on bench I have the cups 1 hole probably too high. Makes it a bit tricky to unrack and rerack. Some would rag on this saying it's a "design flaw" and give it 1 star. Me on the other hand am rational. These work SUPERBLY for every other exercise in the rack. For bench they even work beautifully. I just can't get them to the proper level due to my safety straps. That could very well be my own anatomy's fault and not the design of this product. Still.... I'll knock off 1 star. That's only because I do feel these are excessively long. I'm currently waiting on the standard J-cups to come in the mail that I just ordered so I can do bench at a proper level. I bought them because as far as height goes, the standard ones are about half the height as the sandwich J-cups (6" tall vs. 10" tall). Also, if you look at the design of the standard ones, the backplate bends to become the hook. Look at the Sandwich J-Cups. You have the hook, but then there is a ton of metal below it..... blocking holes on your rack. So if you're looking into getting these, just be aware of that. This is ONLY with the safety strap and sandwich J-cup combination. These should be just fine if you have the pin-pipe safeties, because those don't interfere with holes above or below the one their slid into unlike the safety straps. If you have these and the Pin/pipe safeties and want to upgrade to the straps..... I'd order a pair of standard J-cups too.
Date published: 2018-12-01
Rated 5 out of 5 by from Sandwich J-Cups I have both the original J-Cup and these. These are great. They create a lot more clearance using a 20kg Ohio Power bar compared to the original J-cups. They are are much better on the bar then the original with no possible way for metal on metal. I've read the other reviews about the screws, and they are not an issue at all.
Date published: 2018-03-21
Rated 3 out of 5 by from UPDATE on prior review I previously reviewed the J cups and gave them a 1 star review. My biggest complaint was that they sway a lot when attached to the rack. On the back of the J cup support is a pre drilled hole. Last night I drilled the hole out to a large enough diameter to accommodate a 5/16" bolt and tapped the hole. Than I purchased some 5/16" clamping bolts. Once the clamping bolts are screwed into the newly tapped hole, they allow me to screw the back side of the J cups into the uprights, firmly securing the J cup to the posts. For a cost of $125 plus shipping, these should already come like this. Rogue Fitness, please take note and make the necessary changes. It is very distracting when the bar sways so much while unracking the bar during benching and squatting. I do enjoy having more clearance for the collars.
Date published: 2018-02-09
Rated 3 out of 5 by from Good Quality Used them a few times but its enough for me to say that the regular hooks do a better job than these, sure they look nice but they slide out when you try to center the bar with even very light weight on them, before you order these make sure you try them out, read the return policy Once you used them you stuck with them,Rogue's customer service is really nice and they will tell you in a nice way "Unfortunally we can't help you" even if its just steel.
Date published: 2018-01-19
Rated 5 out of 5 by from Excellent for the bar I bought these J Cups to protect my bars, and they work exceptionally well. I love these things and would buy another pair for my west bench. These work great when racking on heavy squats. You do not have to worry about scratching the knurling at all.
Date published: 2018-01-08
Rated 5 out of 5 by from Great quality j-cups Great Rogue quality, exactly as advertised. I really like these because I use a wider grip on squats and these j-cups give me about 3/4" extra width on each side as to not pinch my fingers re-racking. The design also helps re-racking squats. I walk my squat to the j-cup where the pointed end touches my palms and I can safely re-rack without pinching my hands.
Date published: 2017-11-16
Rated 5 out of 5 by from Essential! I bought a pair of these last month as I wanted to ensure there was no metal to metal contact with my nice barbells. They are big, heavy and well made and for me a total necessity for my rig. I like the fact that the UHMW is also on the underside of the J-Cup in case of any inadvertent contact during pressing. I like them so much that I have an ordered another set - one for bench and one for squats.
Date published: 2016-10-24
  • y_2019, m_1, d_21, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_US, sid_RA0516, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogue